USB not being detected

I have a HP 16GB USB attached to my USB port and it's not being detected by Garuda.

inxi -Fxxxza

System: Kernel: 5.12.13-zen1-2-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=770de3b2-c5a5-47e3-9c9d-f38998d4a2d3
rw [email protected] quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3
Desktop: KDE Plasma 5.22.2 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11 vt: 1 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine: Type: Desktop Mobo: MSI model: B350M GAMING PRO (MS-7A39) v: 1.0 serial:
UEFI-[Legacy]: American Megatrends v: 2.F0 date: 03/19/2018
CPU: Info: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ family: 17 (23)
model-id: 8 stepping: 2 microcode: 800820D cache: L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 81591
Speed: 3511 MHz min/max: 1550/3600 MHz boost: disabled Core speeds (MHz): 1: 3511 2: 3266
3: 3327 4: 3346 5: 3389 6: 3377 7: 3173 8: 3045 9: 3282 10: 3347 11: 3362 12: 3271
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full AMD retpoline, IBPB: conditional, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 465.31
alternate: nouveau,nvidia_drm bus-ID: 1f:00.0 chip-ID: 10de:1c82 class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver: loaded: nvidia display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 93 s-size: 524x292mm (20.6x11.5") s-diag: 600mm (23.6")
Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5")
diag: 598mm (23.5")
OpenGL: renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 465.31
direct render: Yes
Audio: Device-1: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel v: kernel bus-ID: 1f:00.1
chip-ID: 10de:0fb9 class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
bus-ID: 21:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-3: Razer USA Nari Ultimate type: USB driver: hid-generic,snd-usb-audio,usbhid
bus-ID: 1-3:2 chip-ID: 1532:051a class-ID: 0300
Sound Server-1: ALSA v: k5.12.13-zen1-2-zen running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: no
Sound Server-4: PipeWire v: 0.3.30 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI
driver: r8169 v: kernel port: e000 bus-ID: 1b:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp27s0 state: down mac:
Device-2: Realtek RTL8188EE Wireless Network Adapter driver: rtl8188ee v: kernel port: d000
bus-ID: 1c:00.0 chip-ID: 10ec:8179 class-ID: 0280
IF: wlp28s0 state: up mac:
Drives: Local Storage: total: 253.2 GiB used: 28.06 GiB (11.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: MidasForce model: SSD 256GB size: 238.47 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD
serial: rev: S1111A0L scheme: MBR
ID-2: /dev/sda maj-min: 8:0 type: USB vendor: HP model: v245L size: 14.73 GiB block-size:
physical: 512 B logical: 512 B serial: rev: 1100 scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 97.66 GiB size: 238.47 GiB (244.19%) used: 28.06 GiB (11.8%) fs: btrfs
dev: /dev/nvme0n1p1 maj-min: 259:1
ID-2: /home raw-size: 97.66 GiB size: 238.47 GiB (244.19%) used: 28.06 GiB (11.8%) fs: btrfs
dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /var/log raw-size: 97.66 GiB size: 238.47 GiB (244.19%) used: 28.06 GiB (11.8%) fs: btrfs
dev: /dev/nvme0n1p1 maj-min: 259:1
ID-4: /var/tmp raw-size: 97.66 GiB size: 238.47 GiB (244.19%) used: 28.06 GiB (11.8%) fs: btrfs
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 75 (default 100)
ID-1: swap-1 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram0
ID-2: swap-2 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram1
ID-3: swap-3 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram2
ID-4: swap-4 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram3
ID-5: swap-5 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram4
ID-6: swap-6 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram5
ID-7: swap-7 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram6
ID-8: swap-8 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram7
ID-9: swap-9 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram8
ID-10: swap-10 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram9
ID-11: swap-11 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram10
ID-12: swap-12 type: zram size: 663.9 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram11
Sensors: System Temperatures: cpu: 57.9 C mobo: 0 C gpu: nvidia temp: 42 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 40%
Info: Processes: 338 Uptime: 14m wakeups: 0 Memory: 7.78 GiB used: 4.56 GiB (58.6%) Init: systemd
v: 248 tool: systemctl Compilers: gcc: 11.1.0 clang: 12.0.0 Packages: pacman: 1410 lib: 338
Shell: fish v: 3.2.2 default: Bash v: 5.1.8 running-in: konsole inxi: 3.3.04

On all USB ports, only this Stick?

Read

If you include terminal outputs in your post please use the proper output format in your post. Using "~" 3 times above and "~" 3 times below the text block will provide a readable, raw look.

3 Likes

You may need to boot with the iommu=soft grub kernel boot parameter. Search the forum for detailed instructions on how to modify your Grub load line.

Try your USB2 ports on the rear of the mobo.

4 Likes

Maybe you could also try this one...

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.