Unable to import bookmarks via HTML,

Sorry to bump this topic but I’m having a similar issue right now. Unable to import bookmarks via HTML, the restore option also doesn’t work. When I click on it no menus open.

 ╭─heinrichjvr@heinrich in ~ took 8ms
 ╰─λ garuda-inxi
System:
  Kernel: 6.1.62-1-lts arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
    root=UUID=e430d727-5111-4d94-8122-55b81fdb8080 rw rootflags=subvol=@
    quiet resume=UUID=fd6c4d21-749e-4d17-b36d-7b44a32d1fd2 loglevel=3 ibt=off
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
    v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Micro-Star model: B450 TOMAHAWK (MS-7C02) v: 1.0
    serial: <superuser required> UEFI: American Megatrends LLC. v: 1.J1
    date: 05/06/2023
CPU:
  Info: model: AMD Ryzen 3 2200G with Radeon Vega Graphics bits: 64 type: MCP
    arch: Zen level: v3 note: check built: 2017-19 process: GF 14nm
    family: 0x17 (23) model-id: 0x11 (17) stepping: 0 microcode: 0x8101016
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 384 KiB
    desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
    desc: 1x4 MiB
  Speed (MHz): avg: 3500 min/max: 1600/3500 boost: disabled scaling:
    driver: acpi-cpufreq governor: performance cores: 1: 3500 2: 3500 3: 3500
    4: 3500 bogomips: 27962
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
    process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 8
    link-max: lanes: 16 ports: active: DVI-D-1 empty: DP-1,DVI-D-2,HDMI-A-1
    bus-ID: 10:00.0 chip-ID: 1002:67df class-ID: 0300 temp: 46.0 C
  Display: x11 server: X.Org v: 21.1.9 compositor: xfwm v: 4.18.0 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37")
    s-diag: 485mm (19.11")
  Monitor-1: DVI-D-1 mapped: DVI-D-0 model: Samsung SyncMaster
    serial: <filter> built: 2009 res: 1600x900 hz: 60 dpi: 92 gamma: 1.2
    size: 443x250mm (17.44x9.84") diag: 509mm (20") ratio: 16:9 modes:
    max: 1600x900 min: 720x400
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
    drv: radeonsi inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.2.1-arch1.2
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 570 Series (polaris10
    LLVM 16.0.6 DRM 3.49 6.1.62-1-lts) device-ID: 1002:67df memory: 3.91 GiB
    unified: no
  API: Vulkan v: 1.3.269 layers: 9 device: 0 type: discrete-gpu name: AMD
    Radeon RX 570 Series (RADV POLARIS10) driver: mesa radv v: 23.2.1-arch1.2
    device-ID: 1002:67df surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
    (LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.2.1-arch1.2 (LLVM
    16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
  Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 8 link-max: lanes: 16 bus-ID: 10:00.1 chip-ID: 1002:aaf0
    class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Micro-Star MSI
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 30:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.1.62-1-lts status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: PipeWire v: 0.3.85 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Message: No PCI device data found.
  IF-ID-1: enp18s0f0u2 state: unknown speed: -1 duplex: half mac: <filter>
Bluetooth:
  Device-1: vivo 2015 driver: rndis_host v: kernel type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-2:10 chip-ID: 2d95:600a
    class-ID: 0a00 serial: <filter>
Drives:
  Local Storage: total: 698.65 GiB used: 199.38 GiB (28.5%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Mushkin model: MKNSSDHL250GB-D8
    size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: S1111A0L temp: 41.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD5000BMVV-11SXZS1 size: 465.76 GiB block-size: physical: 512 B
    logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0
    tech: HDD rpm: 5400 serial: <filter> fw-rev: 2005 scheme: MBR
Partition:
  ID-1: / raw-size: 223.79 GiB size: 223.79 GiB (100.00%)
    used: 53.93 GiB (24.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 223.79 GiB size: 223.79 GiB (100.00%)
    used: 53.93 GiB (24.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 223.79 GiB size: 223.79 GiB (100.00%)
    used: 53.93 GiB (24.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 223.79 GiB size: 223.79 GiB (100.00%)
    used: 53.93 GiB (24.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 7.68 GiB used: 61.5 MiB (0.8%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
  ID-2: swap-2 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
  System Temperatures: cpu: 35.4 C mobo: N/A gpu: amdgpu temp: 46.0 C
  Fan Speeds (rpm): N/A gpu: amdgpu fan: 1250
Info:
  Processes: 254 Uptime: 5h 24m wakeups: 0 Memory: total: 8 GiB
  available: 7.68 GiB used: 2.18 GiB (28.4%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: pm: pacman pkgs: 1454 libs: 488 tools: octopi,paru Shell: Bash
  v: 5.2.15 running-in: xfce4-terminal inxi: 3.3.31
Garuda (2.6.19-2):
  System install date:     2023-11-14
  Last full system update: 2023-11-18 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            systemd-vconsole-setup.service 

 ╭─heinrichjvr@heinrich in ~ took 1s
 ╰─λ

I wonder if this is related to the file picker thing. :thinking:

If you click the “upload” button in a reply here in the forum, does the file picker appear? Another way to check is to right-click on an image and try to save it.

2 Likes

When I right click on an image and click save as it doesn’t start the download.

Try this:

micro ~/.firedragon/firedragon.overrides.cfg

Paste this into the file:

// Override Firedragon's hardcoded file-picker setting
lockPref("widget.use-xdg-desktop-portal.file-picker", 2);

Save and exit, then restart Firedragon and test again.

6 Likes

Fixed Thanks. :+1:

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.