Hey there, I installed garuda, after installation everything is good and working fine. But after "Garuda Setup Assistant" does the update, when restarting, the screen stuck at "loading initial ramdisk". I can't get into text mode with ctrl+alt+f2. In other threads, it was written that this may be due to proprietary Nvidia drivers and I also tried to skip installing them when "Garuda Setup Assistant" suggested it. But it didn't work. In any case, after the "garuda-update" command, when trying to reboot, the screen hung at the place "loading initial ramdisk". By the way, after executing "garuda-update" it doesn't give any errors. As advised on other topics, I turned off splash in the "Garuda Boot Option", I tried to install plymouth, it installs without errors, but there is still no effect.
Also, another observation is that after the "garuda-update" command, the sound disappears in the system, the output device is no longer displayed in the settings, the volume on the buttons is no longer adjustable.
garuda-inxi:
System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=4006615e-a828-4f24-b2bc-be1d43cf4766 rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=4ec64f71-709e-4580-b521-5f98d85f247a loglevel=3 ibt=off
Desktop: GNOME v: 43.5 tk: GTK v: 3.24.37 wm: gnome-shell dm: GDM v: 44.0
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: HP ENVY Laptop 15-ep0xxx v: N/A
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: HP model: 878E v: 18.33 serial: <filter> UEFI: AMI v: F.11
date: 05/03/2023
Battery:
ID-1: BAT0 charge: 33.1 Wh (58.4%) condition: 56.7/56.7 Wh (100.0%)
volts: 10.9 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
status: discharging cycles: 144
CPU:
Info: model: Intel Core i7-10750H socket: U3E1 bits: 64 type: MT MCP
arch: Comet Lake gen: core 10 level: v3 note: check built: 2020
process: Intel 14nm family: 6 model-id: 0xA5 (165) stepping: 2
microcode: 0xF6
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 1183 high: 2600 min/max: 800/5000 base/boost: 2772/8300
scaling: driver: intel_pstate governor: powersave volts: 0.8 V
ext-clock: 100 MHz cores: 1: 900 2: 900 3: 902 4: 2600 5: 900 6: 2600
7: 900 8: 900 9: 900 10: 900 11: 900 12: 900 bogomips: 62399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CometLake-H GT2 [UHD Graphics] vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2, HDMI-A-3
bus-ID: 0000:00:02.0 chip-ID: 8086:9bc4 class-ID: 0300
Device-2: NVIDIA TU106M [GeForce RTX 2060 Max-Q] vendor: Hewlett-Packard
driver: nvidia v: 530.41.03 alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-03) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-22 bus-ID: 0000:01:00.0
chip-ID: 10de:1f12 class-ID: 0300
Display: server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
compositor: gnome-shell driver: X: loaded: modesetting,nvidia
unloaded: nouveau alternate: fbdev,intel,nv,vesa dri: iris gpu: i915
display-ID: :1 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.00x22.48")
s-diag: 1165mm (45.88")
Monitor-1: eDP-1 model: Samsung 0x4145 built: 2019 res: 3840x2160 hz: 60
dpi: 284 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
ratio: 16:9 modes: 3840x2160
API: OpenGL Message: Unable to show GL data. Required tool glxinfo
missing.
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: Hewlett-Packard
driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_skl,
snd_sof_pci_intel_cnl bus-ID: 0000:00:1f.3 chip-ID: 8086:06c8
class-ID: 0401
Device-2: NVIDIA TU106 High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 0000:01:00.1 chip-ID: 10de:10f9
class-ID: 0403
API: ALSA v: k6.2.13-zen-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.70 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Comet Lake PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 0000:00:14.3 chip-ID: 8086:06f0 class-ID: 0280
IF: wlo1 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 1-14:3 chip-ID: 8087:0026 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode]
driver: intel_nvme_remap v: N/A port: 4060 bus-ID: 0000:00:17.0
chip-ID: 8086:282a rev: class-ID: 0104
Drives:
Local Storage: total: 953.88 GiB used: 5.34 GiB (0.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: KIOXIA model: N/A
size: 476.94 GiB block-size: physical: 512 B logical: 512 B type: SSD
serial: <filter> rev: AGHA4101 temp: 36.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: KIOXIA model: N/A
size: 476.94 GiB block-size: physical: 512 B logical: 512 B type: SSD
serial: <filter> rev: AGHA4101 temp: 36.9 C
Partition:
ID-1: / raw-size: 442.41 GiB size: 442.41 GiB (100.00%)
used: 5.34 GiB (1.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:3
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:2
ID-3: /home raw-size: 442.41 GiB size: 442.41 GiB (100.00%)
used: 5.34 GiB (1.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:3
ID-4: /var/log raw-size: 442.41 GiB size: 442.41 GiB (100.00%)
used: 5.34 GiB (1.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:3
ID-5: /var/tmp raw-size: 442.41 GiB size: 442.41 GiB (100.00%)
used: 5.34 GiB (1.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:3
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 34.23 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:4
ID-2: swap-2 type: zram size: 31.12 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 45.0 C pch: 44.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0 fan-2: 0
Info:
Processes: 377 Uptime: 8m wakeups: 16629 Memory: 31.12 GiB
used: 3.56 GiB (11.4%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1150
libs: 352 tools: pamac,paru Shell: garuda-inxi (sudo) default: Bash
v: 5.1.16 running-in: gnome-terminal inxi: 3.3.26
Garuda (2.6.16-1):
System install date: 2023-08-12
Last full system update: 2023-08-12
Is partially upgraded: Yes
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: No/Undetected
Failed units:
The user can’t change it anway. 
