Hello,
I always used Steam Native but for gmod I need to use Steam Runtime. When i try to launch Steam Runtime it just opens Steam Native.
How can I fix this?
Thank you in advance!
Garuda-inxi below
Kernel: 5.18.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=c65cb364-1a8d-47d4-b86a-0668d7deb215 rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3
Desktop: KDE Plasma v: 5.24.5 tk: Qt v: 5.15.4 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: Hewlett-Packard product: HP Compaq 6000 Pro SFF PC
v: N/A serial: Chassis: type: 4
serial:
Mobo: Hewlett-Packard model: 3048h serial:
BIOS: Hewlett-Packard v: 786G2 v01.09 date: 08/25/2009
CPU:
Info: model: Intel Core2 Duo E7600 bits: 64 type: MCP arch: Core Yorkfield
family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0B
Topology: cpus: 1x cores: 2 smt: cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2339 high: 2498 min/max: 1596/3066 scaling:
driver: acpi-cpufreq governor: performance cores: 1: 2181 2: 2498
bogomips: 12235
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel ports: active: VGA-1 empty: DP-1,HDMI-A-1
bus-ID: 00:02.0 chip-ID: 8086:2e12 class-ID: 0300
Display: x11 server: X.Org v: 21.1.3 with: Xwayland v: 22.1.2
compositor: kwin_x11 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: VGA-1 model: Acer P236H serial: built: 2012
res: 1920x1080 hz: 60 dpi: 96 gamma: 1.2 size: 510x287mm (20.08x11.3")
diag: 585mm (23") ratio: 16:9 modes: max: 1920x1080 min: 720x400
OpenGL: renderer: Mesa Intel Q45/Q43 (ELK) v: 2.1 Mesa 22.1.1
direct render: Yes
Audio:
Device-1: Intel 82801JD/DO HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3a6e
class-ID: 0403
Sound Server-1: ALSA v: k5.18.1-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 16.0 running: no
Sound Server-3: PipeWire v: 0.3.51 running: yes
Network:
Device-1: Intel 82567LM-3 Gigabit Network vendor: Hewlett-Packard
driver: e1000e v: kernel port: 1100 bus-ID: 00:19.0 chip-ID: 8086:10de
class-ID: 0200
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac:
Drives:
Local Storage: total: 465.76 GiB used: 49.77 GiB (10.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD5000AAKX-75U6AA0 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial:
rev: 1H19 scheme: MBR
Partition:
ID-1: / raw-size: 465.76 GiB size: 465.76 GiB (100.00%)
used: 49.77 GiB (10.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 465.76 GiB size: 465.76 GiB (100.00%)
used: 49.77 GiB (10.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 465.76 GiB size: 465.76 GiB (100.00%)
used: 49.77 GiB (10.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 465.76 GiB size: 465.76 GiB (100.00%)
used: 49.77 GiB (10.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.64 GiB used: 1.5 MiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 201 Uptime: 17m wakeups: 0 Memory: 7.64 GiB
used: 2.83 GiB (37.0%) Init: systemd v: 251 tool: systemctl Compilers:
gcc: 12.1.0 clang: 13.0.1 Packages: pacman: 1813 lib: 514 Shell: fish
v: 3.4.1 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.16
Garuda (2.6.3-2):
System install date: 2022-05-21
Last full system update: 2022-06-05
Is partially upgraded: No
Relevant software: NetworkManager
Windows dual boot:
Snapshots: Snapper
Failed units: bluetooth-autoconnect.service
3 Likes
How are you launching Steam?
What happens if you run steam in a terminal?
On my system, there is explicit steam-runtime command.
But you can even get rid of steam-native and just use steam-runtime. It is more compatible.
I just installed Garuda and whichever version of steam I try it won't let me install windows games. I did not have this problem when I tried holoISO. If this distro is supposed to be gaming focused I don't think I should be having this problem.
Hello.
Please don't necro old threads. If you have an issue, please make your own thread and follow the template. Be precise on what exactly the issue is and what game(s) you have problems running and what you have tried to fixed the issue.
5 Likes