Hi,
I have formatted and installed LXQT on bare metal but the screen is black with only cairo dock launching on the desktop.
Booting from live disk everything worked fine.
Any thing I can do to get it to work?
System:
Kernel: 6.2.2-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=65b3faab-3bc9-4b95-b34b-f3dcac595c5a rw single
rootflags=subvol=@
Desktop: KDE Plasma v: 5.27.2 tk: Qt v: 5.15.8 info: cairo-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: Quanta product: NLCB v: N/A
serial: <superuser required> Chassis: type: 10
serial: <superuser required>
Mobo: Quanta model: NLCB v: Type2 - Board Version
serial: <superuser required> UEFI: Insyde v: QP171 date: 09/14/2020
Battery:
ID-1: BAT0 charge: 50.7 Wh (100.0%) condition: 50.7/50.6 Wh (100.2%)
volts: 17.3 min: 15.2 model: MWL32b type: Unknown serial: N/A
status: full
CPU:
Info: model: Intel Core i7-10875H bits: 64 type: MT MCP
arch: Comet Lake gen: core 10 level: v3 note: check built: 2020
process: Intel 14nm family: 6 model-id: 0xA5 (165) stepping: 2
microcode: 0xF4
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1927 high: 2300 min/max: 800/5100 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 2300 3: 2300
4: 800 5: 845 6: 2300 7: 2300 8: 800 9: 2300 10: 2300 11: 2300
12: 2300 13: 2300 14: 2300 15: 2300 16: 2300 bogomips: 73598
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA TU104M [GeForce RTX 2070 SUPER Mobile / Max-Q]
vendor: QUANTA driver: nvidia v: 525.89.02
alternate: nouveau,nvidia_drm non-free: 525.xx+
status: current (as of 2023-02) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-22 pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:1e91 class-ID: 0300
Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 143
s-size: 341x191mm (13.43x7.52") s-diag: 391mm (15.39")
Monitor-1: DP-1 res: 1920x1080 hz: 144 dpi: 142
size: 344x193mm (13.54x7.6") diag: 394mm (15.53") modes: N/A
API: OpenGL Message: Unable to show GL data. Required tool glxinfo
missing.
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: QUANTA
driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
chip-ID: 8086:06c8 class-ID: 0403
Device-2: NVIDIA TU104 HD Audio vendor: QUANTA driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:10f8 class-ID: 0403
Sound API: ALSA v: k6.2.2-zen2-1-zen running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.66 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: QUANTA driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 3000 bus-ID: 08:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp8s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 704.24 GiB used: 5.14 GiB (0.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 500GB size: 465.76 GiB block-size:
physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 2B2QEXM7 temp: 36.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:3 model: 256GB PCS PCIe M.2 SSD
size: 238.47 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: S1111H0L
temp: 39.9 C scheme: GPT
Partition:
ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 5.14 GiB (1.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-2bfb4a9a-5cc9-413a-bc09-43da99ede8e7
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 752 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 5.14 GiB (1.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-2bfb4a9a-5cc9-413a-bc09-43da99ede8e7
ID-4: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 5.14 GiB (1.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-2bfb4a9a-5cc9-413a-bc09-43da99ede8e7
ID-5: /var/tmp raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 5.14 GiB (1.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-2bfb4a9a-5cc9-413a-bc09-43da99ede8e7
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.53 GiB used: 0 KiB (0.0%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 45.0 C pch: 50.0 C mobo: N/A gpu: nvidia
temp: 42 C
Fan Speeds (RPM): N/A
Info:
Processes: 316 Uptime: 3m wakeups: 1 Memory: 15.53 GiB
used: 1.96 GiB (12.7%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1181
libs: 309 tools: octopi,paru Shell: Bash v: 5.1.16
running-in: qterminal inxi: 3.3.25
Garuda (2.6.15-1):
System install date: 2023-03-11
Last full system update: 2023-03-11
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: No/Undetected
Failed units: plymouth-deactivate.service