GPU Problems Slow motion

I just installed a new gpu into my computer and re-installed the proper drivers, mesa, xf86, vulkan. The problem I'm having is that my computer is running in slow motion, If I boot with the DP on the gpu it just black screens, but if I use the intergrated graphics it boots up just fine but when I switch the DP back to the gpu then everything is in slow motion.

My specs are: 5600G, B550 by gigabyte, RX 6600 XT.

Stuff I did to get the gpu to work so far (I was black screening) was I changed the intergrated graphics from forces to auto and I set the PCEI from auto to gen 3.

System:
  Kernel: 5.15.34-1-lts arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
    root=UUID=801484a3-5548-4ad2-bf28-82530730d844 rw [email protected]
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3
  Desktop: Xfce v: 4.16.0 tk: Gtk v: 3.24.29 info: xfce4-panel wm: xfwm
    v: 4.16.1 vt: 7 dm: LightDM v: 1.30.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Gigabyte model: B550M AORUS PRO v: x.x
    serial: <superuser required> UEFI: American Megatrends v: F10
    date: 09/18/2020
CPU:
  Info: model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 3 family: 0x19 (25) model-id: 0x50 (80) stepping: 0
    microcode: 0xA500007
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 1795 high: 3981 min/max: 1400/4464 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1330 2: 1374
    3: 1511 4: 3566 5: 1426 6: 1401 7: 1497 8: 1349 9: 1364 10: 3981 11: 1331
    12: 1420 bogomips: 93415
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 23 [Radeon RX 6600/6600 XT/6600M] vendor: Gigabyte
    driver: amdgpu v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
    active: none empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 03:00.0
    chip-ID: 1002:73ff class-ID: 0300
  Device-2: AMD Cezanne vendor: Gigabyte driver: amdgpu v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
    active: DP-3 empty: HDMI-A-3 bus-ID: 0b:00.0 chip-ID: 1002:1638
    class-ID: 0300
  Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
    bus-ID: 3-2:3 chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 21.1.3 compositor: xfwm v: 4.16.1 driver:
    X: loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
    gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: DP-3 mapped: DisplayPort-2 model: MSI G241 serial: <filter>
    built: 2021 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel
    pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28
    class-ID: 0403
  Device-2: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
    speed: 16 GT/s bus-ID: 0b:00.1 chip-ID: 1002:1637 class-ID: 0403
  Device-3: AMD Family 17h/19h HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 0b:00.6 chip-ID: 1022:15e3
    class-ID: 0403
  Device-4: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
    bus-ID: 3-2:3 chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
  Sound Server-1: ALSA v: k5.15.34-1-lts running: yes
  Sound Server-2: PulseAudio v: 15.0 running: no
  Sound Server-3: PipeWire v: 0.3.50 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: e000 bus-ID: 09:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp9s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 465.76 GiB used: 131.42 GiB (28.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 500GB size: 465.76 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 31.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 131.42 GiB (28.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 131.42 GiB (28.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 131.42 GiB (28.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
    used: 131.42 GiB (28.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 15.1 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 16.8 C mobo: N/A
  Fan Speeds (RPM): N/A
  GPU: device: amdgpu temp: 25.0 C device: amdgpu temp: 34.0 C mem: 32.0 C
    fan: 0 watts: 7.00
Info:
  Processes: 349 Uptime: 1h 3m wakeups: 0 Memory: 15.1 GiB
  used: 3.75 GiB (24.8%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.2.0 Packages: pacman: 1171 lib: 328 Shell: Bash v: 5.1.16
  running-in: xfce4-terminal inxi: 3.3.15
Garuda (2.6.1-3):
  System install date:     2022-03-18
  Last full system update: 2022-04-23 ↻
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       No/Undetected
  Snapshots:               Snapper
  Failed units:            bluetooth-autoconnect.service

First, reboot, second read

please and edit your post.

Thirdly,

:slight_smile:

1 Like

After a reboot I'm now at a black screen still using intergrated graphics. before I would have my display/desktop working but in slow motion.

I also edit my original post as per your request.

Edit: I have repluged my DP into the graphics card and I have a display but it is still in slow motion

  • You should select SATA mode to ACHI [Done in BIOS]

For KDE Dragonized

  • Use compositor for balence of latency in integrated graphics [System Settings]

So the settings your were talking about was already toggled. I found a setting in the I/O options that toggled display so I set that to PCEI-1 then saved and exit, and I bricked the PC . So i had to remove the graphics card and removed the cmos and now everything is working fine.

Thanks for your guys help I appreciate it.

set to dgpu and re-install or try how the live boot usb works with dgpu only first

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.