I will start with this…
╭─fenris@fenris in ~ as 🧙 took 0s
╰─λ sudo garuda-inxi
System:
Kernel: 6.15.2-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=9a84ff09-2e69-42ea-b974-85d5f9a637fc rw rootflags=subvol=@
quiet rd.luks.uuid=3594f570-93c8-4a63-b099-34ce9110cbe1
rd.luks.uuid=72f3aff6-7ac6-43ad-bd47-ee4e2308a0a7
resume=/dev/mapper/luks-72f3aff6-7ac6-43ad-bd47-ee4e2308a0a7 loglevel=3
ibt=off
Desktop: Xfce v: 4.20.1 tk: Gtk v: 3.24.48 wm: xfwm4 v: 4.20.0
with: plank,xfce4-panel tools: xfce4-screensaver avail: xautolock
dm: LightDM v: 1.32.0 Distro: Garuda base: Arch Linux
Machine:
Type: Mini-pc Mobo: AZW model: EQ serial: N/A
uuid: 68ce8b00-6aeb-11ef-8ec5-a4a2b6b92601 UEFI: American Megatrends LLC.
v: FP7T107 date: 07/22/2024
CPU:
Info: model: AMD Ryzen 9 6900HX with Radeon Graphics socket: FP7 bits: 64
type: MT MCP arch: Zen 3+ gen: 3 level: v3 note: check built: 2022
process: TSMC n6 (7nm) family: 0x19 (25) model-id: 0x44 (68) stepping: 1
microcode: 0xA404107
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB
desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1208 min/max: 416/4937 boost: enabled
base/boost: 3300/4925 scaling: driver: amd-pstate-epp governor: powersave
volts: 1.2 V ext-clock: 100 MHz cores: 1: 1208 2: 1208 3: 1208 4: 1208
5: 1208 6: 1208 7: 1208 8: 1208 9: 1208 10: 1208 11: 1208 12: 1208
13: 1208 14: 1208 15: 1208 16: 1208 bogomips: 105408
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Rembrandt [Radeon 680M]
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
active: HDMI-A-1,HDMI-A-2 empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6,
DP-7, Writeback-1 bus-ID: 06:00.0 chip-ID: 1002:1681 class-ID: 0300
temp: 48.0 C
Device-2: Creative Live! Cam Sync 1080p V2 driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 7-1.1.3:6
chip-ID: 041e:40a1 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.18 compositor: xfwm4 v: 4.20.0 driver:
X: loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1017x286mm (40.04x11.26")
s-diag: 1056mm (41.59")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 pos: primary,right model: HP LA2206
serial: <filter> built: 2011 res: mode: 1920x1080 hz: 60 scale: 100% (1)
dpi: 102 gamma: 1.2 size: 477x268mm (18.78x10.55") diag: 547mm (21.5")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-2: HDMI-A-2 mapped: HDMI-A-1 pos: left model: Samsung LS32B30
serial: <filter> built: 2025 res: mode: 1920x1080 hz: 60 scale: 100% (1)
dpi: 70 gamma: 1.2 size: 698x393mm (27.48x15.47") diag: 184mm (7.2")
ratio: 16:9, 16:10 modes: max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: radeonsi surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon 680M (radeonsi rembrandt
LLVM 20.1.6 DRM 3.63 6.15.2-zen1-1-zen) device-ID: 1002:1681
memory: 3.91 GiB unified: no
API: Vulkan v: 1.4.313 layers: 7 device: 0 type: integrated-gpu name: AMD
Radeon 680M (RADV REMBRANDT) driver: mesa radv v: 25.1.4-arch1.1
device-ID: 1002:1681 surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 20.1.6 256 bits) driver: mesa llvmpipe v: 25.1.4-arch1.1 (LLVM
20.1.6) device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo de: xfce4-display-settings
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Radeon High Definition Audio
[Rembrandt/Strix] driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 06:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Audio Coprocessor
driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x,
snd_pci_acp5x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
snd_sof_amd_acp63, snd_sof_amd_acp70 pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 06:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-4: Creative Live! Cam Sync 1080p V2 driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 7-1.1.3:6
chip-ID: 041e:40a1 class-ID: 0102 serial: <filter>
API: ALSA v: k6.15.2-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.4.5 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp3s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000
bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000
bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp5s0 state: down mac: <filter>
IF-ID-1: tun0 state: unknown speed: 10000 Mbps duplex: full mac: N/A
IF-ID-2: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-3: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-1:2 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: N/A
Drives:
Local Storage: total: 4.55 TiB used: 618.43 GiB (13.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:4 vendor: Crucial model: CT1000P3PSSD8
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: P9CR413 temp: 41.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital
model: WD BLACK SN770 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 731130WD temp: 47.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LM015-2E8174
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: USB
rev: 3.2 spd: 10 Gb/s lanes: 1 mode: 3.2 gen-2x1 tech: HDD rpm: 5400
serial: <filter> fw-rev: 0202 scheme: MBR
Partition:
ID-1: / raw-size: 1.8 TiB size: 1.8 TiB (100.00%) used: 618.43 GiB (33.6%)
fs: btrfs block-size: 4096 B dev: /dev/dm-1 maj-min: 253:1
mapped: luks-3594f570-93c8-4a63-b099-34ce9110cbe1
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 776 KiB (0.3%) fs: vfat block-size: 512 B dev: /dev/nvme1n1p1
maj-min: 259:1
ID-3: /home raw-size: 1.8 TiB size: 1.8 TiB (100.00%)
used: 618.43 GiB (33.6%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
maj-min: 253:1 mapped: luks-3594f570-93c8-4a63-b099-34ce9110cbe1
ID-4: /var/log raw-size: 1.8 TiB size: 1.8 TiB (100.00%)
used: 618.43 GiB (33.6%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
maj-min: 253:1 mapped: luks-3594f570-93c8-4a63-b099-34ce9110cbe1
ID-5: /var/tmp raw-size: 1.8 TiB size: 1.8 TiB (100.00%)
used: 618.43 GiB (33.6%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
maj-min: 253:1 mapped: luks-3594f570-93c8-4a63-b099-34ce9110cbe1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 21.25 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/dm-0 maj-min: 253:0
mapped: luks-72f3aff6-7ac6-43ad-bd47-ee4e2308a0a7
ID-2: swap-2 type: zram size: 19.3 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 48.8 C mobo: 40.5 C gpu: amdgpu temp: 48.0 C
Fan Speeds (rpm): N/A
Info:
Memory: total: 20 GiB available: 19.31 GiB used: 6.65 GiB (34.4%)
Processes: 507 Power: uptime: 3m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 7.7 GiB services: upowerd,xfce4-power-manager
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1633 libs: 433 tools: pamac,paru,yay
pm: flatpak pkgs: 0 Compilers: gcc: 15.1.1 Shell: garuda-inxi (sudo)
default: Bash v: 5.2.37 running-in: xfce4-terminal inxi: 3.3.38
Garuda (2.7.2-1):
System install date: 2025-05-22
Last full system update: 2025-06-20
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units: vmware.service
╭─fenris@fenris in ~ as 🧙 took 3s
╰─λ
I’m having some trouble installing linux-firmware and related packages…
╭─fenris@fenris in ~ as 🧙 took 2m21s
╰─λ sudo rm -rf /var/lib/pacman/db.lck && garuda-update --aur --noconfirm
:: Synchronizing package databases...
garuda is up to date
core is up to date
extra is up to date
multilib is up to date
chaotic-aur is up to date
--> Refreshing mirrorlists using rate-mirrors, please be patient..🍵
:: Synchronizing package databases...
garuda downloading...
core downloading...
extra downloading...
multilib downloading...
chaotic-aur downloading...
spawn pacman -Su
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Package (10) Old Version New Version Net Change
core/linux-firmware 20250508.788aadc8-2 20250613.12fe085f-5 -280.88 MiB
core/linux-firmware-amdgpu 20250613.12fe085f-5 24.91 MiB
core/linux-firmware-atheros 20250613.12fe085f-5 41.67 MiB
core/linux-firmware-broadcom 20250613.12fe085f-5 12.94 MiB
core/linux-firmware-intel 20250613.12fe085f-5 108.97 MiB
core/linux-firmware-mediatek 20250613.12fe085f-5 22.82 MiB
core/linux-firmware-nvidia 20250613.12fe085f-5 103.55 MiB
core/linux-firmware-other 20250613.12fe085f-5 25.04 MiB
core/linux-firmware-radeon 20250613.12fe085f-5 2.30 MiB
core/linux-firmware-realtek 20250613.12fe085f-5 5.42 MiB
Total Installed Size: 347.62 MiB
Net Upgrade Size: 66.74 MiB
:: Proceed with installation? [Y/n] y
(10/10) checking keys in keyring [--------------------------------------------------------------------] 100%
(10/10) checking package integrity [--------------------------------------------------------------------] 100%
(10/10) loading package files [--------------------------------------------------------------------] 100%
(10/10) checking for file conflicts [--------------------------------------------------------------------] 100%
error: failed to commit transaction (conflicting files)
linux-firmware-nvidia: /usr/lib/firmware/nvidia/ad103 exists in filesystem
linux-firmware-nvidia: /usr/lib/firmware/nvidia/ad104 exists in filesystem
linux-firmware-nvidia: /usr/lib/firmware/nvidia/ad106 exists in filesystem
linux-firmware-nvidia: /usr/lib/firmware/nvidia/ad107 exists in filesystem
Errors occurred, no packages were upgraded.
╭─fenris@fenris in ~ as 🧙
[🧱] ×
I have tried looking at Updating Error. error: failed to commit transaction (conflicting files) with no success
I have had to do an IgnorePkg = linux-firmware-nvidia edit to my /etc/pacman.conf just to bypass this enough to talk about it.
Is there any solutions?
Thanks
