Garuda boot splash

during the boot i don’t see anymore the fancy boot animation i had once.
How do i solve?

 ╭─spupuz@garuda in ~ 
 ╰─λ garuda-inxi
System:
  Kernel: 6.6.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=ba7d935a-efc5-4356-8064-8bd37070e77d rw rootflags=subvol=@
    quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
    ibt=off
  Desktop: GNOME v: 45.2 tk: GTK v: 3.24.39 wm: gnome-shell dm: GDM
    v: 45.0.1 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Vmware System: VMware product: VMware Virtual Platform v: N/A
    serial: <superuser required> Chassis: No Enclosure type: 1
    serial: <superuser required>
  Mobo: Intel model: 440BX Desktop Reference Platform
    serial: <superuser required> BIOS: Phoenix v: 6.00 date: 11/12/2020
CPU:
  Info: model: Intel Core i5-8259U bits: 64 type: SMP arch: Coffee Lake
    gen: core 8 level: v3 note: check built: 2017 process: Intel 14nm family: 6
    model-id: 0x8E (142) stepping: 0xA (10) microcode: 0xFFFFFFFF
  Topology: cpus: 2x cores: 1 smt: <unsupported> cache:
    L1: 2x 64 KiB (128 KiB) desc: d-1x32 KiB; i-1x32 KiB
    L2: 2x 256 KiB (512 KiB) desc: 1x256 KiB L3: 2x 6 MiB (12 MiB)
    desc: 1x6 MiB
  Speed (MHz): avg: 2304 min/max: N/A cores: 1: 2304 2: 2304 bogomips: 9216
  Flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: VMware SVGA II Adapter driver: vmwgfx v: 2.20.0.0 ports:
    active: Virtual-1 empty: Virtual-2, Virtual-3, Virtual-4, Virtual-5,
    Virtual-6, Virtual-7, Virtual-8 bus-ID: 00:0f.0 chip-ID: 15ad:0405
    class-ID: 0300
  Device-2: Realtek USB Camera driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4.1:6
    chip-ID: 0bda:525a class-ID: 0102 serial: <filter>
  Display: wayland server: X.Org v: 23.2.3 with: Xwayland v: 23.2.3
    compositor: gnome-shell driver: gpu: vmwgfx display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26")
    s-diag: 583mm (22.95")
  Monitor-1: Virtual-1 res: 1920x1080 hz: 60 size: N/A modes: max: 1920x1080
    min: 640x480
  API: Vulkan Message: No Vulkan data available.
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: Ensoniq ES1371/ES1373 / Creative Labs CT2518 driver: snd_ens1371
    v: kernel bus-ID: 02:02.0 chip-ID: 1274:1371 class-ID: 0401
  Device-2: Realtek USB Camera driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4.1:6
    chip-ID: 0bda:525a class-ID: 0102 serial: <filter>
  API: ALSA v: k6.6.8-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82371AB/EB/MB PIIX4 ACPI vendor: VMware Virtual Machine
    type: network bridge driver: N/A modules: i2c_piix4 port: N/A
    bus-ID: 00:07.3 chip-ID: 8086:7113 class-ID: 0680
  Device-2: Intel 82545EM Gigabit Ethernet vendor: VMware PRO/1000 MT
    Single Port driver: e1000 v: kernel port: 2000 bus-ID: 02:01.0
    chip-ID: 8086:100f class-ID: 0200
  IF: ens33 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: tailscale0 state: unknown speed: -1 duplex: full mac: N/A
Bluetooth:
  Device-1: VMware Virtual Bluetooth Adapter driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1:2 chip-ID: 0e0f:0008
    class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: N/A
Drives:
  Local Storage: total: 80 GiB used: 35.63 GiB (44.5%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: VMware model: Virtual S size: 80 GiB
    block-size: physical: 512 B logical: 512 B tech: N/A serial: N/A fw-rev: 1.0
    scheme: MBR
Partition:
  ID-1: / raw-size: 80 GiB size: 80 GiB (100.00%) used: 35.63 GiB (44.5%)
    fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-2: /home raw-size: 80 GiB size: 80 GiB (100.00%)
    used: 35.63 GiB (44.5%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-3: /var/log raw-size: 80 GiB size: 80 GiB (100.00%)
    used: 35.63 GiB (44.5%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-4: /var/tmp raw-size: 80 GiB size: 80 GiB (100.00%)
    used: 35.63 GiB (44.5%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 7.72 GiB used: 932 MiB (11.8%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 2 dev: /dev/zram0
Sensors:
  Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon
    or lm-sensors.
Info:
  Processes: 337 Uptime: 1h 54m wakeups: 0 Memory: total: 8 GiB
  available: 7.72 GiB used: 5.07 GiB (65.7%) Init: systemd v: 255
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: 1693 pm: pacman pkgs: 1681 libs: 396 tools: pamac,paru pm: flatpak
  pkgs: 12 Shell: fish v: 3.7.0 running-in: gnome-terminal inxi: 3.3.31
Garuda (2.6.22-1):
  System install date:     2023-12-30
  Last full system update: 2024-01-02 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       <superuser required>
  Failed units:

If you refer to the Plymouth boot splash screen, it has been removed due to known and recurring errors.
See “Farewell Plymouth” here:

Or e.g.

5 Likes

thanks for the explaination.

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.