I use garuda dragonized KDE (my Garuda KDE system) over a year now. It is really great, Thank you Gadruda Team!
I recently bought a laptop Dell Vostro 3580 I5-intel vga only. I installed the garuda hyperland 4 times today but i was not able to login. I give password and just drop me back to the login screen.
Garuda-inxi from live system
System:
Kernel: 6.5.9-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=garuda root=miso:LABEL=GARUDA_HYPRLAND_RAPTOR quiet
systemd.show_status=1 ibt=off driver=free nouveau.modeset=1
i915.modeset=1 radeon.modeset=1
Desktop: Hyprland info: waybar dm: SDDM Distro: Garuda Linux
base: Arch Linux
Machine:
Type: Laptop System: Dell product: Vostro 3580 v: N/A serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: Dell model: 0PMTCG v: A00 serial: <filter> UEFI: Dell v: 1.27.0
date: 11/16/2023
Battery:
ID-1: BAT0 charge: 29.3 Wh (100.0%) condition: 29.3/42.0 Wh (69.8%)
volts: 12.7 min: 11.4 model: BYD DELL 1VX1H97 type: Li-ion serial: <filter>
status: full
CPU:
Info: model: Intel Core i5-8265U socket: BGA1528 (U3E1) note: check bits: 64
type: MT MCP arch: Comet/Whiskey Lake note: check gen: core 8 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
stepping: 0xC (12) microcode: 0xF8
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 480 high: 647 min/max: 400/3900 base/boost: 3700/3900
scaling: driver: intel_pstate governor: powersave volts: 1.0 V
ext-clock: 100 MHz cores: 1: 400 2: 400 3: 400 4: 600 5: 400 6: 400 7: 647
8: 600 bogomips: 28800
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Dell
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 0000:00:02.0
chip-ID: 8086:3ea0 class-ID: 0300
Device-2: Sunplus Innovation [] driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:2 chip-ID: 1bcf:2b98
class-ID: 0e02
Display: server: X.org v: 1.21.1.9 with: Xwayland v: 23.2.2
compositor: Hyprland driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: :1
Monitor-1: eDP-1 model: AU Optronics 0x38ed built: 2015 res: 1920x1080
dpi: 142 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
ratio: 16:9 modes: 1920x1080
API: Vulkan Message: No Vulkan data available.
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
Device-1: Intel Cannon Point-LP High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 0000:00:1f.3 chip-ID: 8086:9dc8 class-ID: 0403
API: ALSA v: k6.5.9-zen2-1-zen status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.83 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Dell driver: r8169 v: kernel port: 3000 bus-ID: 0000:01:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0 state: down mac: <filter>
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
vendor: Dell driver: ath10k_pci v: kernel bus-ID: 0000:02:00.0
chip-ID: 168c:0042 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Bluetooth:
Device-1: Qualcomm Atheros [] driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10:3 chip-ID: 0cf3:e009
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.2
lmp-v: 8 status: discoverable: no pairing: no class-ID: 6c010c
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode]
driver: intel_nvme_remap v: N/A port: 4060 bus-ID: 0000:00:17.0
chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
Local Storage: total: 519.8 GiB used: 0 KiB (0.0%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba
model: KBG40ZNS256G NVMe 256GB size: 238.47 GiB block-size: physical: 512 B
logical: 512 B tech: SSD serial: <filter> fw-rev: 10410106 temp: 19.9 C
scheme: GPT
SMART: yes health: PASSED on: 129d 3h cycles: 801
read-units: 14,402,285 [7.37 TB] written-units: 11,547,160 [5.91 TB]
ID-2: /dev/sda maj-min: 8:0 vendor: A-Data model: SU630 family: based SSDs
size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.0
speed: 6.0 Gb/s tech: SSD serial: <filter> fw-rev: 3R17 temp: 36 C
scheme: GPT
SMART: yes state: enabled health: PASSED on: 39d 3h cycles: 959
read: 8.89 TiB written: 6.07 TiB
ID-3: /dev/sdb maj-min: 8:16 vendor: Kingston model: DataTraveler 3.0
size: 57.75 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter>
fw-rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 7.63 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 44.0 C pch: 44.0 C mobo: 32.0 C
Fan Speeds (rpm): cpu: 0
Info:
Processes: 212 Uptime: 26m wakeups: 24950 Memory: total: 8 GiB
available: 7.64 GiB used: 1.41 GiB (18.4%) igpu: 32 MiB Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
pm: pacman pkgs: 1228 libs: 356 tools: paru Shell: garuda-inxi (sudo)
default: Bash v: 5.1.16 running-in: foot inxi: 3.3.30
Garuda (2.6.17-1):
System install date: 2024-01-18
Last full system update: 2024-01-18 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Yes
Failed units: snapper-cleanup.service
``
During the install i choose the keyboard and localization but the keyboard settings look like doesn't change nothing. I still got the wrong character when i press the keyboard.
What is the next i can do for troubleshoot the issue?
For this small additional question i dont want open a new topic is well. :upside_down_face: If i want to encrypt my partitions, should i encrypt the swap partition is well or enough the root and home?
Thank you.
# Set keyboard layout
#exec-once = .local/bin/garuda-locale.sh
Only one question and encrypt is special:D
And
ONE issue per topic.
Describe your issue in detail. The more we know, the better we can help
Show us the results of your searches, and what you’ve tried
After rebooting, post the FULL output of garuda-inxi in the body of the post (not linked externally, or collapsed with the “hide details” feature)
Format terminal output (including your garuda-inxi) as a code block by clicking the preformatted text button (</>) , or put three tildes (~) above and below the text
Now i will try set it up. after kde, hyprland is way “harder” set up. ( because i just start use now. )
4 chars
