Desktop shuts down unexpectedly without warning

It was the same when I used Manjaro and Mabox Linux. But it's absolutely crazy with Garuda. The time point is between 15 minutes and up to 4-6 hours. There is no pattern to it, and in rare cases it can take up to 2 days before it happens, but then it can happen that it shuts down 5-6 times at 15 minute intervals.

garuda-inxi

System:
  Kernel: 6.1.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=c3b5a276-2ff5-48eb-b3b9-8882ae70f336 rw [email protected]
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    resume=UUID=6795e62a-144b-4672-9381-98765df0dba7 loglevel=3 ibt=off
  Desktop: MATE v: 1.26.0 info: mate-panel wm: marco v: 1.26.1 vt: 7
    dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop System: MM-Vision product: Computer v: N/A
    serial: <superuser required>
  Mobo: ASUSTeK model: PRIME B360M-C v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 2416
    date: 05/23/2019
CPU:
  Info: model: Intel Core i7-9700 bits: 64 type: MCP arch: Coffee Lake
    gen: core 9 level: v3 note: check built: 2018 process: Intel 14nm family: 6
    model-id: 0x9E (158) stepping: 0xD (13) microcode: 0xF4
  Topology: cpus: 1x cores: 8 smt: <unsupported> cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB L3: 12 MiB
    desc: 1x12 MiB
  Speed (MHz): avg: 3000 min/max: 800/4700 scaling: driver: intel_pstate
    governor: performance cores: 1: 3000 2: 3000 3: 3000 4: 3000 5: 3000 6: 3000
    7: 3000 8: 3000 bogomips: 48000
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: retbleed mitigation: Enhanced IBRS
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort mitigation: TSX disabled
Graphics:
  Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] vendor: ASUSTeK
    driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
    ports: active: DP-3 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2, HDMI-A-3
    bus-ID: 00:02.0 chip-ID: 8086:3e98 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.6 compositor: marco v: 1.26.1 driver:
    X: loaded: modesetting alternate: fbdev,intel,vesa dri: iris gpu: i915
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: DP-3 model: ASUS VP248 serial: <filter> built: 2019
    res: 1920x1080 hz: 60 dpi: 92 gamma: 1.2 size: 531x299mm (20.91x11.77")
    diag: 609mm (24") ratio: 16:9 modes: max: 1920x1080 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.1 renderer: Mesa Intel UHD Graphics 630 (CFL
    GT2) direct render: Yes
Audio:
  Device-1: Intel Cannon Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:a348 class-ID: 0403
  Sound API: ALSA v: k6.1.1-zen1-1-zen running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.63 running: yes
Network:
  Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel
    port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15bc class-ID: 0200
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 4.57 TiB used: 77.53 GiB (1.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW010T8
    size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: 002C temp: 37.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD40EZRZ-22GXCB0 size: 3.64 TiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: 0A80 scheme: GPT
Partition:
  ID-1: / raw-size: 884.65 GiB size: 884.65 GiB (100.00%)
    used: 77.53 GiB (8.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 884.65 GiB size: 884.65 GiB (100.00%)
    used: 77.53 GiB (8.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 884.65 GiB size: 884.65 GiB (100.00%)
    used: 77.53 GiB (8.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 884.65 GiB size: 884.65 GiB (100.00%)
    used: 77.53 GiB (8.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 62.66 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
  ID-2: swap-2 type: partition size: 68.92 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
  System Temperatures: cpu: 33.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 278 Uptime: 1h 25m wakeups: 0 Memory: 62.66 GiB
  used: 4.14 GiB (6.6%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: pm: pacman
  pkgs: 1542 libs: 387 tools: octopi,pamac,paru Shell: Bash v: 5.1.16
  running-in: terminator inxi: 3.3.24
Garuda (2.6.12-1):
  System install date:     2022-12-13
  Last full system update: 2022-12-26 ↻
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       No/Undetected
  Snapshots:               Snapper
  Failed units:   

stress-ng --cpu 0 --verify --verbose --timeout 5m

stress-ng: debug: [44212] invoked with 'stress-ng --cpu 0 --verify --verbose --timeout 5m' by user 1000 'carl'
stress-ng: debug: [44212] stress-ng 0.15.01
stress-ng: debug: [44212] system: Linux andersen 6.1.1-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Wed, 21 Dec 2022 22:27:59 +0000 x86_64
stress-ng: debug: [44212] RAM total: 62.7G, RAM free: 55.2G, swap free: 131.6G
stress-ng: debug: [44212] temporary file path: '.', filesystem type: btrfs
stress-ng: debug: [44212] 8 processors online, 8 processors configured
stress-ng: info:  [44212] setting to a 300 second (5 mins, 0.00 secs) run per stressor
stress-ng: info:  [44212] dispatching hogs: 8 cpu
stress-ng: debug: [44212] cache allocate: shared cache buffer size: 12288K
stress-ng: debug: [44212] starting stressors
stress-ng: debug: [44213] cpu: started [44213] (instance 0)
stress-ng: debug: [44214] cpu: started [44214] (instance 1)
stress-ng: debug: [44215] cpu: started [44215] (instance 2)
stress-ng: debug: [44214] cpu: using method 'all'
stress-ng: debug: [44216] cpu: started [44216] (instance 3)
stress-ng: debug: [44215] cpu: using method 'all'
stress-ng: debug: [44217] cpu: started [44217] (instance 4)
stress-ng: debug: [44216] cpu: using method 'all'
stress-ng: debug: [44218] cpu: started [44218] (instance 5)
stress-ng: debug: [44217] cpu: using method 'all'
stress-ng: debug: [44219] cpu: started [44219] (instance 6)
stress-ng: debug: [44212] 8 stressors started
stress-ng: debug: [44218] cpu: using method 'all'
stress-ng: debug: [44220] cpu: started [44220] (instance 7)
stress-ng: debug: [44219] cpu: using method 'all'
stress-ng: debug: [44220] cpu: using method 'all'
stress-ng: debug: [44213] cpu: using method 'all'
stress-ng: debug: [44217] cpu: exited [44217] (instance 4)
stress-ng: debug: [44218] cpu: exited [44218] (instance 5)
stress-ng: debug: [44219] cpu: exited [44219] (instance 6)
stress-ng: debug: [44213] cpu: exited [44213] (instance 0)
stress-ng: debug: [44212] process [44213] terminated
stress-ng: debug: [44220] cpu: exited [44220] (instance 7)
stress-ng: debug: [44214] cpu: exited [44214] (instance 1)
stress-ng: debug: [44216] cpu: exited [44216] (instance 3)
stress-ng: debug: [44215] cpu: exited [44215] (instance 2)
stress-ng: debug: [44212] process [44214] terminated
stress-ng: debug: [44212] process [44215] terminated
stress-ng: debug: [44212] process [44216] terminated
stress-ng: debug: [44212] process [44217] terminated
stress-ng: debug: [44212] process [44218] terminated
stress-ng: debug: [44212] process [44219] terminated
stress-ng: debug: [44212] process [44220] terminated
stress-ng: debug: [44212] metrics-check: all stressor metrics validated and sane
stress-ng: info:  [44212] successful run completed in 300.00s (5 mins, 0.00 secs)

I have also tried with memtest where it has run 4 times without any errors.
What could be wrong when I get no errors on the tests.

I forgot this.
systemctl list-timers

NEXT                        LEFT               LAST                        PASSED             UNIT                             ACTIVATES          >
Mon 2022-12-26 11:48:32 CET 42min left         Fri 2022-12-23 07:40:30 CET 3 days ago         updatedb.timer                   updatedb.service
Mon 2022-12-26 12:17:02 CET 1h 11min left      Sun 2022-12-25 13:15:20 CET 21h ago            man-db.timer                     man-db.service
Tue 2022-12-27 00:00:00 CET 12h left           Mon 2022-12-26 09:02:15 CET 2h 3min ago        logrotate.timer                  logrotate.service
Tue 2022-12-27 00:00:00 CET 12h left           Mon 2022-12-26 09:02:15 CET 2h 3min ago        shadow.timer                     shadow.service
Tue 2022-12-27 09:12:44 CET 22h left           Mon 2022-12-26 09:12:44 CET 1h 52min ago       snapper-cleanup.timer            snapper-cleanup.ser>
Tue 2022-12-27 09:17:18 CET 22h left           Mon 2022-12-26 09:17:18 CET 1h 48min ago       systemd-tmpfiles-clean.timer     systemd-tmpfiles-cl>
Sun 2023-01-01 00:00:00 CET 5 days left        Mon 2022-12-26 09:02:15 CET 2h 3min ago        btrfs-balance.timer              btrfs-balance.servi>
Sun 2023-01-01 00:00:00 CET 5 days left        Mon 2022-12-26 09:02:15 CET 2h 3min ago        btrfs-defrag.timer               btrfs-defrag.service
Sun 2023-01-01 00:00:00 CET 5 days left        Mon 2022-12-26 09:02:15 CET 2h 3min ago        btrfs-scrub.timer                btrfs-scrub.service
Sun 2023-01-01 00:00:00 CET 5 days left        Mon 2022-12-26 09:02:15 CET 2h 3min ago        btrfs-trim.timer                 btrfs-trim.service
Sun 2023-01-01 17:21:50 CET 6 days left        Fri 2022-12-09 09:51:57 CET 2 weeks 3 days ago archlinux-keyring-wkd-sync.timer archlinux-keyring-w>
Mon 2023-01-02 00:19:45 CET 6 days left        Mon 2022-12-26 10:21:12 CET 44min ago          fstrim.timer                     fstrim.service
Sat 2023-01-07 15:00:00 CET 1 week 5 days left Fri 2022-12-09 10:06:09 CET 2 weeks 3 days ago pamac-cleancache.timer           pamac-cleancache.se>



Is it possible your system is overheating?

Is your PSU good?

What is the significance of your systemd timers?

1 Like

It's on the far right of the output

sudo dmidecode -t chassis

# dmidecode 3.4
Getting SMBIOS data from sysfs.
SMBIOS 3.2.1 present.

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
	Manufacturer: Default string
	Type: Desktop
	Lock: Not Present
	Version: Default string
	Serial Number: Default string
	Asset Tag: Default string
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00000000
	Height: Unspecified
	Number Of Power Cords: 1
	Contained Elements: 0
	SKU Number: Default string

sudo dmidecode –type 39

# dmidecode 3.4
Getting SMBIOS data from sysfs.
SMBIOS 3.2.1 present.
Table at 0x8A997000.

Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
	Vendor: American Megatrends Inc.
	Version: 2416
	Release Date: 05/23/2019
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 16 MB
	Characteristics:
		PCI is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
		UEFI is supported
	BIOS Revision: 5.13

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: MM-Vision
	Product Name: Computer
	Version: System Version
	Serial Number: 157799847484
	UUID: be4a6d68-f269-6cb8-a301-04d4c4f01bf0
	Wake-up Type: Power Switch
	SKU Number: ASUS_MB_CNL
	Family: To be filled by O.E.M.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
	Manufacturer: ASUSTeK COMPUTER INC.
	Product Name: PRIME B360M-C
	Version: Rev X.0x
	Serial Number: 190652486902604
	Asset Tag: Default string
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis: Default string
	Chassis Handle: 0x0003
	Type: Motherboard
	Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
	Manufacturer: Default string
	Type: Desktop
	Lock: Not Present
	Version: Default string
	Serial Number: Default string
	Asset Tag: Default string
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00000000
	Height: Unspecified
	Number Of Power Cords: 1
	Contained Elements: 0
	SKU Number: Default string

Handle 0x0004, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: KBMS
	Internal Connector Type: None
	External Reference Designator: PS/2 Mouse
	External Connector Type: PS/2
	Port Type: Mouse Port

Handle 0x0005, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: KBMS
	Internal Connector Type: None
	External Reference Designator: PS/2 Keyboard
	External Connector Type: PS/2
	Port Type: Keyboard Port

Handle 0x0006, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: HDMI
	Internal Connector Type: None
	External Reference Designator: HDMI port
	External Connector Type: None
	Port Type: Other

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: VGA
	Internal Connector Type: None
	External Reference Designator: VGA port
	External Connector Type: Other
	Port Type: Other

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: U31G2_12
	Internal Connector Type: None
	External Reference Designator: U31G2_34
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: DP12
	Internal Connector Type: None
	External Reference Designator: DP12 port
	External Connector Type: None
	Port Type: Other

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: U31G2_34
	Internal Connector Type: None
	External Reference Designator: U31G1_56
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LANUSB_910
	Internal Connector Type: None
	External Reference Designator: LANUSB_910
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: AUDIO
	Internal Connector Type: None
	External Reference Designator: AUDIO
	External Connector Type: Other
	Port Type: Audio Port

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CPU_FAN
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHA_FAN1
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHA_FAN2
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: MONO_OUT
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: AAFP
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM1
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM2
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LPT
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: TPM
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: U31G2_56
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB78
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LPC_DEBUG
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB1112
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHASSIS
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: F_PANEL
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_1
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_2
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_3
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_4
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_5
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_6
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SPEAKER
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: M.2_1(SOCKET3)
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: M.2_2(SOCKET3)
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0025, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIEX16
	Type: x16 PCI Express
	Current Usage: Available
	Length: Long
	ID: 0
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:ff:01.0

Handle 0x0026, DMI type 9, 19 bytes
System Slot Information
	Designation: PCIEX1_1
	Type: x1 PCI Express
	Current Usage: Available
	Length: Short
	ID: 1
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:ff:1c.3
	Data Bus Width: 19
	Peer Devices: 0

Handle 0x0027, DMI type 9, 19 bytes
System Slot Information
	Designation: PCIEX1_2
	Type: x1 PCI Express
	Current Usage: Available
	Length: Short
	ID: 2
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:ff:1c.4
	Data Bus Width: 159
	Peer Devices: 0

Handle 0x0028, DMI type 9, 19 bytes
System Slot Information
	Designation: PCI
	Type: 32-bit PCI
	Current Usage: Available
	Length: Short
	ID: 3
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:04:1c.5
	Data Bus Width: 136
	Peer Devices: 0

Handle 0x0029, DMI type 10, 6 bytes
On Board Device Information
	Type: Video
	Status: Enabled
	Description:    To Be Filled By O.E.M.

Handle 0x002A, DMI type 11, 5 bytes
OEM Strings
	String 1: Default string
	String 2: Default string
	String 3: ZEBRA
	String 4: Default string
	String 5: FFFFFFFFFFFFF
	String 6: FFFFFFFFFFFFF
	String 7: FFFFFFFFFFFFF
	String 8: Default string

Handle 0x002B, DMI type 12, 5 bytes
System Configuration Options
	Option 1: SMI:00B29C05
	Option 2: DSN:                               .
	Option 3: DSN:                               .
	Option 4: DSN:                               .

Handle 0x002C, DMI type 32, 20 bytes
System Boot Information
	Status: No errors detected

Handle 0x002D, DMI type 34, 11 bytes
Management Device
	Description: Nuvoton NCT6793D
	Type: Other
	Address: 0x00000295
	Address Type: I/O Port

Handle 0x002E, DMI type 26, 22 bytes
Voltage Probe
	Description: LM78A
	Location: Motherboard
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x002F, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0030, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x002D
	Component Handle: 0x002E
	Threshold Handle: 0x002F

Handle 0x0031, DMI type 28, 22 bytes
Temperature Probe
	Description: LM78A
	Location: Motherboard
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0032, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0033, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x002D
	Component Handle: 0x0031
	Threshold Handle: 0x0032

Handle 0x0034, DMI type 27, 15 bytes
Cooling Device
	Temperature Probe Handle: 0x0031
	Type: Power Supply Fan
	Status: OK
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating
	Description: Cooling Dev 1

Handle 0x0035, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0036, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x002D
	Component Handle: 0x0034
	Threshold Handle: 0x0035

Handle 0x0037, DMI type 27, 15 bytes
Cooling Device
	Temperature Probe Handle: 0x0031
	Type: Power Supply Fan
	Status: OK
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating
	Description: Not Specified

Handle 0x0038, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0039, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x002D
	Component Handle: 0x0037
	Threshold Handle: 0x0038

Handle 0x003A, DMI type 29, 22 bytes
Electrical Current Probe
	Description: ABC
	Location: Motherboard
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x003B, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x003C, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x002D
	Component Handle: 0x003A
	Threshold Handle: 0x003B

Handle 0x003D, DMI type 26, 22 bytes
Voltage Probe
	Description: LM78A
	Location: Power Unit
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x003E, DMI type 28, 22 bytes
Temperature Probe
	Description: LM78A
	Location: Power Unit
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x003F, DMI type 27, 15 bytes
Cooling Device
	Temperature Probe Handle: 0x003E
	Type: Power Supply Fan
	Status: OK
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating
	Description: Cooling Dev 1

Handle 0x0040, DMI type 29, 22 bytes
Electrical Current Probe
	Description: ABC
	Location: Power Unit
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0041, DMI type 39, 22 bytes
System Power Supply
	Power Unit Group: 1
	Location: To Be Filled By O.E.M.
	Name: To Be Filled By O.E.M.
	Manufacturer: To Be Filled By O.E.M.
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Model Part Number: To Be Filled By O.E.M.
	Revision: To Be Filled By O.E.M.
	Max Power Capacity: Unknown
	Status: Present, OK
	Type: Switching
	Input Voltage Range Switching: Auto-switch
	Plugged: Yes
	Hot Replaceable: No
	Input Voltage Probe Handle: 0x003D
	Cooling Device Handle: 0x003F
	Input Current Probe Handle: 0x0040

Handle 0x0042, DMI type 40, 41 bytes
Additional Information 1
	Referenced Handle: 0x0029
	Referenced Offset: 0x01
	String: To Be Filled By O.E.M. 1
	Value: 0x00000000
Additional Information 2
	Referenced Handle: 0x0001
	Referenced Offset: 0x0f
	String: Not Specified
	Value: 0x0000001e
Additional Information 3
	Referenced Handle: 0x004f
	Referenced Offset: 0x01
	String: Mordor
	Value: 0x00000000
Additional Information 4
	Referenced Handle: 0x0001
	Referenced Offset: 0x01
	String: To Be Filled By O.E.M.
	Value: 0x00000000

Handle 0x0043, DMI type 16, 23 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 64 GB
	Error Information Handle: Not Provided
	Number Of Devices: 4

Handle 0x0044, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0043
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 16 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM1
	Bank Locator: BANK 0
	Type: DDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Corsair
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: CM4X16GC3000C16K4D  
	Rank: 2
	Configured Memory Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: 1.2 V

Handle 0x0045, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0043
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 16 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM2
	Bank Locator: BANK 1
	Type: DDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Corsair
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: CM4X16GC3000C16K4D  
	Rank: 2
	Configured Memory Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: 1.2 V

Handle 0x0046, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0043
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 16 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM1
	Bank Locator: BANK 2
	Type: DDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Corsair
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: CM4X16GC3000C16K4D  
	Rank: 2
	Configured Memory Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: 1.2 V

Handle 0x0047, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0043
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 16 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM2
	Bank Locator: BANK 3
	Type: DDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Corsair
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: CM4X16GC3000C16K4D  
	Rank: 2
	Configured Memory Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: 1.2 V

Handle 0x0048, DMI type 19, 31 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x00FFFFFFFFF
	Range Size: 64 GB
	Physical Array Handle: 0x0043
	Partition Width: 4

Handle 0x0049, DMI type 221, 26 bytes
OEM-specific Type
	Header and Data:
		DD 1A 49 00 03 01 00 07 00 4E 20 00 02 00 00 00
		00 B8 00 03 00 FF FF FF FF FF
	Strings:
		Reference Code - CPU
		uCode Version
		TXT ACM version

Handle 0x004A, DMI type 221, 26 bytes
OEM-specific Type
	Header and Data:
		DD 1A 4A 00 03 01 00 07 00 4E 20 00 02 00 00 00
		00 00 00 03 04 0C 00 16 1E 05
	Strings:
		Reference Code - ME
		MEBx version
		ME Firmware Version
		Consumer SKU

Handle 0x004B, DMI type 221, 82 bytes
OEM-specific Type
	Header and Data:
		DD 52 4B 00 0B 01 00 07 00 4E 20 00 02 03 FF FF
		FF FF FF 04 00 FF FF FF 10 00 05 00 FF FF FF 10
		00 06 00 FF FF FF FF FF 07 00 02 00 00 00 00 08
		00 09 00 00 00 00 09 00 0A 00 00 00 00 0A 00 07
		00 00 00 00 0B 00 06 00 00 00 00 0C 00 07 00 00
		00 00
	Strings:
		Reference Code - CNL PCH
		PCH-CRID Status
		Disabled
		PCH-CRID Original Value
		PCH-CRID New Value
		OPROM - RST - RAID
		CNL PCH H A0 Hsio Version
		CNL PCH H Ax Hsio Version
		CNL PCH H Bx Hsio Version
		CNL PCH LP B0 Hsio Version
		CNL PCH LP Bx Hsio Version
		CNL PCH LP Dx Hsio Version

Handle 0x004C, DMI type 221, 54 bytes
OEM-specific Type
	Header and Data:
		DD 36 4C 00 07 01 00 07 00 4E 20 00 02 00 00 07
		01 5F 00 03 00 07 00 4E 20 00 04 05 FF FF FF FF
		FF 06 00 00 00 00 0D 00 07 00 00 00 00 0D 00 08
		00 FF FF FF FF FF
	Strings:
		Reference Code - SA - System Agent
		Reference Code - MRC
		SA - PCIe Version
		SA-CRID Status
		Disabled
		SA-CRID Original Value
		SA-CRID New Value
		OPROM - VBIOS

Handle 0x004D, DMI type 221, 12 bytes
OEM-specific Type
	Header and Data:
		DD 0C 4D 00 01 01 00 04 00 00 00 00
	Strings:
		FSP Binary Version

Handle 0x004E, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L1 Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 512 kB
	Maximum Size: 512 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Parity
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x004F, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L2 Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 2 MB
	Maximum Size: 2 MB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 4-way Set-associative

Handle 0x0050, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L3 Cache
	Configuration: Enabled, Not Socketed, Level 3
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 12 MB
	Maximum Size: 12 MB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Multi-bit ECC
	System Type: Unified
	Associativity: 12-way Set-associative

Handle 0x0051, DMI type 4, 48 bytes
Processor Information
	Socket Designation: LGA1151
	Type: Central Processor
	Family: Core i7
	Manufacturer: Intel(R) Corporation
	ID: ED 06 09 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 158, Stepping 13
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Multi-threading)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz
	Voltage: 1.0 V
	External Clock: 100 MHz
	Max Speed: 8300 MHz
	Current Speed: 2970 MHz
	Status: Populated, Enabled
	Upgrade: Socket LGA1151
	L1 Cache Handle: 0x004E
	L2 Cache Handle: 0x004F
	L3 Cache Handle: 0x0050
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Part Number: To Be Filled By O.E.M.
	Core Count: 8
	Core Enabled: 8
	Thread Count: 8
	Characteristics:
		64-bit capable
		Multi-Core
		Execute Protection
		Enhanced Virtualization
		Power/Performance Control

Handle 0x0052, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x003FFFFFFFF
	Range Size: 16 GB
	Physical Device Handle: 0x0044
	Memory Array Mapped Address Handle: 0x0048
	Partition Row Position: Unknown
	Interleave Position: 1
	Interleaved Data Depth: 2

Handle 0x0053, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00800000000
	Ending Address: 0x00BFFFFFFFF
	Range Size: 16 GB
	Physical Device Handle: 0x0045
	Memory Array Mapped Address Handle: 0x0048
	Partition Row Position: Unknown
	Interleave Position: 1
	Interleaved Data Depth: 2

Handle 0x0054, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00400000000
	Ending Address: 0x007FFFFFFFF
	Range Size: 16 GB
	Physical Device Handle: 0x0046
	Memory Array Mapped Address Handle: 0x0048
	Partition Row Position: Unknown
	Interleave Position: 2
	Interleaved Data Depth: 2

Handle 0x0055, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00C00000000
	Ending Address: 0x00FFFFFFFFF
	Range Size: 16 GB
	Physical Device Handle: 0x0047
	Memory Array Mapped Address Handle: 0x0048
	Partition Row Position: Unknown
	Interleave Position: 2
	Interleaved Data Depth: 2


End Of Table

What is?

You are pasting a lot of output into the thread without explaining what you think it means.

1 Like

Okay

man-db.service
man-db is an implementation of the standard Unix documentation system accessed using the man command. It uses a Berkeley DB database in place of the traditional flat-text whatis databases

logrotate.service
Logrotate is a system utility that manages the automatic rotation and compression of log files. If log files were not rotated, compressed, and periodically pruned, they could eventually consume all available disk space on a system.

shadow.service
shadow is a file which contains the password information for the system's accounts and optional aging information.

snapper-cleanup.service
Snapper is a tool for filesystem snapshot management.

sudo snapper list

   # | Type   | Præ # | Dato                         | Bruger | Oprydning | Beskrivelse                                      | Brugerdata
-----+--------+-------+------------------------------+--------+-----------+--------------------------------------------------+-----------
  0  | single |       |                              | root   |           | current                                          |           
347  | pre    |       | søn 25 dec 2022 11:23:10 CET | root   | number    | /usr/bin/pamac-daemon                            |           
348  | post   |   347 | søn 25 dec 2022 11:23:11 CET | root   | number    | graphviz suitesparse                             |           
349  | pre    |       | søn 25 dec 2022 18:26:09 CET | root   | number    | /usr/bin/pamac-daemon                            |           
350  | post   |   349 | søn 25 dec 2022 18:26:10 CET | root   | number    | intel-gmmlib intel-media-driver perl-alien-build |           
351  | pre    |       | man 26 dec 2022 09:14:20 CET | root   | number    | /usr/bin/pamac-daemon                            |           
352  | post   |   351 | man 26 dec 2022 09:14:22 CET | root   | number    | blender                                          |           
353  | pre    |       | man 26 dec 2022 10:00:03 CET | root   | number    | /usr/bin/pamac-daemon                            |           
354  | post   |   353 | man 26 dec 2022 10:00:04 CET | root   | number    | debugedit                                        |           
355  | pre    |       | man 26 dec 2022 10:00:13 CET | root   | number    | /usr/bin/pamac-daemon                            |           
356  | post   |   355 | man 26 dec 2022 10:00:13 CET | root   | number    | cpuid                                            |           
357  | pre    |       | man 26 dec 2022 12:55:57 CET | root   | number    | /usr/bin/pamac-daemon                            |           
358  | post   |   357 | man 26 dec 2022 12:56:09 CET | root   | number    | btrfs-progs ipmitool starship                    |           
359  | pre    |       | man 26 dec 2022 13:16:12 CET | root   | number    | /usr/bin/pamac-daemon                            |           
360  | post   |   359 | man 26 dec 2022 13:16:13 CET | root   | number    | ipmitool     


btrfs-balance.service
Btrfs balance is a tool to re-arrange the layout of chunks and free up unallocated disk space

btrfs-defrag.service
Defragmentation of files is supposed to make the layout of the file extents to be more linear or at least coalesce the file extents into larger ones that can be stored on the device more efficiently. The reason there’s a need for defragmentation stems from the COW design that BTRFS is built on and is inherent.

btrfs-scrub.service
btrfs scrub is used to scrub a mounted btrfs filesystem, which will read all data and metadata blocks from all devices and verify checksums. Automatically repair corrupted blocks if there's a correct copy available.

btrfs-trim.service
Trim is an operation on a storage device based on flash technology (SSD, NVMe or similar), a thin-provisioned device or could be emulated on top of other block device types. On real hardware, there’s a different lifetime span of the memory cells and the driver firmware usually tries to optimize for that.

archlinux-keyring
The archlinux-keyring package, which is a dependency of pacman, contains the latest keys.

fstrim.service
Fstrim is used on a mounted filesystem to discard blocks which are not in use by the filesystem. This is useful for solid-state drives (SSDs)

pamac-cleancache.service
Clean the package cache periodically

  1. Your output shows you haven't rebooted since updating. Do so.
  2. Check for an update for your BIOS. If one exists, then update it.

Merry Christmas

4 Likes

Today I handed in the computer to those who built my computer. It is still under warranty. They will test it and update the BIOS. It is the biggest manufacturer of computers in Denmark and they know about linux and I hope they can find the fault in the computer

3 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.