Crash to login screen multiple times a day

[Smurg]

2-3 times a day my PC will freeze until i restart it or it crashes to the login screen.
Here are the results of garuda-inxi and dmesg i am using X11

garuda-inxi
System:
Kernel: 6.4.4-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=f343e266-2bba-4823-826a-311cb6319709 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=29f15791-f1dd-436f-902e-804af7e61bb0 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.6 tk: Qt v: 5.15.10 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: B650M AORUS ELITE v: -CF
serial: <superuser required>
Mobo: Gigabyte model: B650M AORUS ELITE v: x.x
serial: <superuser required> UEFI: American Megatrends LLC. v: F7a
date: 06/07/2023
CPU:
Info: model: AMD Ryzen 5 7600X bits: 64 type: MT MCP arch: Zen 4 gen: 5
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601203
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 6 MiB desc: 6x1024 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 4427 high: 5440 min/max: 3000/5453 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 4343 2: 5440
3: 4352 4: 4351 5: 4351 6: 4361 7: 4346 8: 5439 9: 3147 10: 4305 11: 4347
12: 4351 bogomips: 112586
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
vendor: ASUSTeK driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: DP-1,DP-2,HDMI-A-1 empty: DP-3 bus-ID: 03:00.0
chip-ID: 1002:73df class-ID: 0300
Device-2: AMD Raphael vendor: Gigabyte driver: amdgpu v: kernel
arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: none empty: DP-4, DP-5,
DP-6, HDMI-A-2 bus-ID: 11:00.0 chip-ID: 1002:164e class-ID: 0300
temp: 42.0 C
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.2
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting,radeon
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1013x285mm (39.88x11.22")
s-diag: 1052mm (41.43")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: left model: Philips PHL 243V5
serial: <filter> built: 2018 res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2
size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-2: DP-2 mapped: DisplayPort-1 pos: primary,right model: Samsung
built: 2010 res: 1920x1080 hz: 60 dpi: 305 gamma: 1.2
size: 160x90mm (6.3x3.54") diag: 1021mm (40.2") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-3: HDMI-A-1 mapped: HDMI-A-0 pos: right
model: ViewSonic XG2401 SERIES serial: <filter> built: 2016 res: 1920x1080
hz: 60 dpi: 92 gamma: 1.2 size: 531x299mm (20.91x11.77") diag: 609mm (24")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 23.1.3 renderer: AMD Radeon RX 6750 XT (navi22
LLVM 15.0.7 DRM 3.52 6.4.4-zen1-1-zen) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Rembrandt Radeon High Definition Audio driver: snd_hda_intel
v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 11:00.1
chip-ID: 1002:1640 class-ID: 0403
Device-3: AMD Family 17h/19h HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 11:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.4.4-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.74 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 0d:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp13s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-2:2 chip-ID: 0bda:8771
class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 16.81 TiB used: 1.18 TiB (7.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000MX500SSD1
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 023 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST8000AS0002-1NA17Z
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5980 serial: <filter> fw-rev: RT18 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST8000AS0002-1NA17Z
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5980 serial: <filter> fw-rev: AR15 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 model: HDD USB 3.0 size: 447.13 GiB
block-size: physical: 4096 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s
lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter> fw-rev: 0209
scheme: GPT
Partition:
ID-1: / raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 1.18 TiB (65.9%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 1.18 TiB (65.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 1.18 TiB (65.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 1.18 TiB (65.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 30.5 GiB used: 85.5 MiB (0.3%) priority: 100
dev: /dev/zram0
ID-2: swap-2 type: partition size: 33.56 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 62.0 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: amdgpu temp: 48.0 C mem: 46.0 C fan: 0 watts: 20.00
device: amdgpu temp: 42.0 C
Info:
Processes: 456 Uptime: 44m wakeups: 0 Memory: total: 32 GiB note: est.
available: 30.51 GiB used: 12.15 GiB (39.8%) Init: systemd v: 253
default: graphical tool: systemctl Compilers: gcc: 13.1.1 alt: 12
clang: 15.0.7 Packages: pm: pacman pkgs: 2054 libs: 540
tools: gnome-software,octopi,pamac,paru Shell: fish v: 3.6.1 default: Bash
v: 5.1.16 running-in: yakuake inxi: 3.3.28
Garuda (2.6.16-1):
System install date:     2023-07-10
Last full system update: 2023-07-22
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       No/Undetected
Failed units:            systemd-vconsole-setup.service

[    0.238093] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.238179] pci 0000:05:04.0: [1022:43f5] type 01 class 0x060400
[    0.238207] pci 0000:05:04.0: enabling Extended Tags
[    0.238249] pci 0000:05:04.0: PME# supported from D0 D3hot D3cold
[    0.238332] pci 0000:05:05.0: [1022:43f5] type 01 class 0x060400
[    0.238360] pci 0000:05:05.0: enabling Extended Tags
[    0.238402] pci 0000:05:05.0: PME# supported from D0 D3hot D3cold
[    0.238487] pci 0000:05:06.0: [1022:43f5] type 01 class 0x060400
[    0.238515] pci 0000:05:06.0: enabling Extended Tags
[    0.238557] pci 0000:05:06.0: PME# supported from D0 D3hot D3cold
[    0.238641] pci 0000:05:07.0: [1022:43f5] type 01 class 0x060400
[    0.238669] pci 0000:05:07.0: enabling Extended Tags
[    0.238711] pci 0000:05:07.0: PME# supported from D0 D3hot D3cold
[    0.238801] pci 0000:05:08.0: [1022:43f5] type 01 class 0x060400
[    0.238829] pci 0000:05:08.0: enabling Extended Tags
[    0.238871] pci 0000:05:08.0: PME# supported from D0 D3hot D3cold
[    0.238956] pci 0000:05:09.0: [1022:43f5] type 01 class 0x060400
[    0.238984] pci 0000:05:09.0: enabling Extended Tags
[    0.239026] pci 0000:05:09.0: PME# supported from D0 D3hot D3cold
[    0.239112] pci 0000:05:0a.0: [1022:43f5] type 01 class 0x060400
[    0.239140] pci 0000:05:0a.0: enabling Extended Tags
[    0.239180] pci 0000:05:0a.0: PME# supported from D0 D3hot D3cold
[    0.239266] pci 0000:05:0b.0: [1022:43f5] type 01 class 0x060400
[    0.239294] pci 0000:05:0b.0: enabling Extended Tags
[    0.239336] pci 0000:05:0b.0: PME# supported from D0 D3hot D3cold
[    0.239425] pci 0000:05:0c.0: [1022:43f5] type 01 class 0x060400
[    0.239453] pci 0000:05:0c.0: enabling Extended Tags
[    0.239481] pci 0000:05:0c.0: PME# supported from D0 D3hot D3cold
[    0.239540] pci 0000:05:0d.0: [1022:43f5] type 01 class 0x060400
[    0.239567] pci 0000:05:0d.0: enabling Extended Tags
[    0.239596] pci 0000:05:0d.0: PME# supported from D0 D3hot D3cold
[    0.239650] pci 0000:04:00.0: PCI bridge to [bus 05-10]
[    0.239652] pci 0000:04:00.0:   bridge window [io  0xe000-0xefff]
[    0.239654] pci 0000:04:00.0:   bridge window [mem 0xfc900000-0xfcbfffff]
[    0.239676] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.239703] pci 0000:05:04.0: PCI bridge to [bus 07]
[    0.239729] pci 0000:05:05.0: PCI bridge to [bus 08]
[    0.239756] pci 0000:05:06.0: PCI bridge to [bus 09]
[    0.239782] pci 0000:05:07.0: PCI bridge to [bus 0a]
[    0.239809] pci 0000:05:08.0: PCI bridge to [bus 0b]
[    0.239835] pci 0000:05:09.0: PCI bridge to [bus 0c]
[    0.239881] pci 0000:0d:00.0: [10ec:8125] type 00 class 0x020000
[    0.239899] pci 0000:0d:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.239925] pci 0000:0d:00.0: reg 0x18: [mem 0xfcb00000-0xfcb0ffff 64bit]
[    0.239941] pci 0000:0d:00.0: reg 0x20: [mem 0xfcb10000-0xfcb13fff 64bit]
[    0.240057] pci 0000:0d:00.0: supports D1 D2
[    0.240057] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.240276] pci 0000:05:0a.0: PCI bridge to [bus 0d]
[    0.240279] pci 0000:05:0a.0:   bridge window [io  0xe000-0xefff]
[    0.240281] pci 0000:05:0a.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.240304] pci 0000:05:0b.0: PCI bridge to [bus 0e]
[    0.240338] pci 0000:0f:00.0: [1022:43f7] type 00 class 0x0c0330
[    0.240349] pci 0000:0f:00.0: reg 0x10: [mem 0xfca00000-0xfca07fff 64bit]
[    0.240374] pci 0000:0f:00.0: enabling Extended Tags
[    0.240405] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
[    0.240468] pci 0000:05:0c.0: PCI bridge to [bus 0f]
[    0.240471] pci 0000:05:0c.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.240501] pci 0000:10:00.0: [1022:43f6] type 00 class 0x010601
[    0.240530] pci 0000:10:00.0: reg 0x24: [mem 0xfc980000-0xfc9803ff]
[    0.240535] pci 0000:10:00.0: reg 0x30: [mem 0xfc900000-0xfc97ffff pref]
[    0.240539] pci 0000:10:00.0: enabling Extended Tags
[    0.240564] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[    0.240609] pci 0000:05:0d.0: PCI bridge to [bus 10]
[    0.240612] pci 0000:05:0d.0:   bridge window [mem 0xfc900000-0xfc9fffff]
[    0.240690] pci 0000:11:00.0: [1002:164e] type 00 class 0x030000
[    0.240696] pci 0000:11:00.0: reg 0x10: [mem 0xfc20000000-0xfc2fffffff 64bit pref]
[    0.240701] pci 0000:11:00.0: reg 0x18: [mem 0xfc30000000-0xfc301fffff 64bit pref]
[    0.240704] pci 0000:11:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.240707] pci 0000:11:00.0: reg 0x24: [mem 0xfc800000-0xfc87ffff]
[    0.240712] pci 0000:11:00.0: enabling Extended Tags
[    0.240741] pci 0000:11:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.240797] pci 0000:11:00.1: [1002:1640] type 00 class 0x040300
[    0.240802] pci 0000:11:00.1: reg 0x10: [mem 0xfc888000-0xfc88bfff]
[    0.240815] pci 0000:11:00.1: enabling Extended Tags
[    0.240834] pci 0000:11:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.240865] pci 0000:11:00.2: [1022:1649] type 00 class 0x108000
[    0.240892] pci 0000:11:00.2: reg 0x18: [mem 0xfc700000-0xfc7fffff]
[    0.240898] pci 0000:11:00.2: reg 0x24: [mem 0xfc88c000-0xfc88dfff]
[    0.240902] pci 0000:11:00.2: enabling Extended Tags
[    0.240951] pci 0000:11:00.3: [1022:15b6] type 00 class 0x0c0330
[    0.240958] pci 0000:11:00.3: reg 0x10: [mem 0xfc600000-0xfc6fffff 64bit]
[    0.240973] pci 0000:11:00.3: enabling Extended Tags
[    0.240993] pci 0000:11:00.3: PME# supported from D0 D3hot D3cold
[    0.241025] pci 0000:11:00.4: [1022:15b7] type 00 class 0x0c0330
[    0.241032] pci 0000:11:00.4: reg 0x10: [mem 0xfc500000-0xfc5fffff 64bit]
[    0.241047] pci 0000:11:00.4: enabling Extended Tags
[    0.241067] pci 0000:11:00.4: PME# supported from D0 D3hot D3cold
[    0.241099] pci 0000:11:00.6: [1022:15e3] type 00 class 0x040300
[    0.241103] pci 0000:11:00.6: reg 0x10: [mem 0xfc880000-0xfc887fff]
[    0.241117] pci 0000:11:00.6: enabling Extended Tags
[    0.241135] pci 0000:11:00.6: PME# supported from D0 D3hot D3cold
[    0.241176] pci 0000:00:08.1: PCI bridge to [bus 11]
[    0.241178] pci 0000:00:08.1:   bridge window [io  0xd000-0xdfff]
[    0.241179] pci 0000:00:08.1:   bridge window [mem 0xfc500000-0xfc8fffff]
[    0.241180] pci 0000:00:08.1:   bridge window [mem 0xfc20000000-0xfc301fffff 64bit pref]
[    0.241199] pci 0000:12:00.0: [1022:15b8] type 00 class 0x0c0330
[    0.241210] pci 0000:12:00.0: reg 0x10: [mem 0xfcf00000-0xfcffffff 64bit]
[    0.241230] pci 0000:12:00.0: enabling Extended Tags
[    0.241255] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[    0.241302] pci 0000:00:08.3: PCI bridge to [bus 12]
[    0.241304] pci 0000:00:08.3:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.242278] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.242299] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.242316] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.242338] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.242357] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.242373] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.242389] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.242405] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.242803] iommu: Default domain type: Translated
[    0.242803] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.242803] SCSI subsystem initialized
[    0.242803] libata version 3.00 loaded.
[    0.242803] ACPI: bus type USB registered
[    0.242803] usbcore: registered new interface driver usbfs
[    0.242803] usbcore: registered new interface driver hub
[    0.242803] usbcore: registered new device driver usb
[    0.249081] pps_core: LinuxPPS API ver. 1 registered
[    0.249082] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.249083] PTP clock support registered
[    0.249088] EDAC MC: Ver: 3.0.0
[    0.249159] efivars: Registered efivars operations
[    0.249159] NetLabel: Initializing
[    0.249159] NetLabel:  domain hash size = 128
[    0.249159] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.249159] NetLabel:  unlabeled traffic allowed by default
[    0.249159] mctp: management component transport protocol core
[    0.249159] NET: Registered PF_MCTP protocol family
[    0.249159] PCI: Using ACPI for IRQ routing
[    0.252453] PCI: pci_cache_line_size set to 64 bytes
[    0.252507] e820: reserve RAM buffer [mem 0x09aff000-0x0bffffff]
[    0.252508] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.252508] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.252509] e820: reserve RAM buffer [mem 0x5da99018-0x5fffffff]
[    0.252509] e820: reserve RAM buffer [mem 0x5daa4018-0x5fffffff]
[    0.252510] e820: reserve RAM buffer [mem 0x5dab2018-0x5fffffff]
[    0.252510] e820: reserve RAM buffer [mem 0x6b41e000-0x6bffffff]
[    0.252510] e820: reserve RAM buffer [mem 0x6e62f000-0x6fffffff]
[    0.252510] e820: reserve RAM buffer [mem 0x6fec2000-0x6fffffff]
[    0.252511] e820: reserve RAM buffer [mem 0x7bffb000-0x7bffffff]
[    0.252732] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[    0.252732] pci 0000:03:00.0: vgaarb: bridge control possible
[    0.252732] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.252734] pci 0000:11:00.0: vgaarb: bridge control possible
[    0.252735] pci 0000:11:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.252735] vgaarb: loaded
[    0.252751] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.252758] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.254752] clocksource: Switched to clocksource tsc-early
[    0.254792] VFS: Disk quotas dquot_6.6.0
[    0.254796] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.254822] pnp: PnP ACPI init
[    0.254843] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.254871] system 00:01: [mem 0xfff80000-0xffffffff] has been reserved
[    0.254893] system 00:02: [mem 0x858000000-0x877ffffff window] has been reserved
[    0.255430] system 00:04: [io  0x0a00-0x0a2f] has been reserved
[    0.255430] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.255431] system 00:04: [io  0x0a40-0x0a4f] has been reserved
[    0.255431] system 00:04: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.255620] pnp 00:05: [dma 0 disabled]
[    0.255725] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.255726] system 00:06: [io  0x040b] has been reserved
[    0.255726] system 00:06: [io  0x04d6] has been reserved
[    0.255727] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.255727] system 00:06: [io  0x0c14] has been reserved
[    0.255727] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.255728] system 00:06: [io  0x0c52] has been reserved
[    0.255728] system 00:06: [io  0x0c6c] has been reserved
[    0.255728] system 00:06: [io  0x0c6f] has been reserved
[    0.255729] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.255729] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.255730] system 00:06: [io  0x0b00-0x0b0f] has been reserved
[    0.255730] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.255730] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.255731] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.255731] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.255732] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.255733] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.255733] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.255734] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.255734] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.255735] system 00:06: [mem 0xfeb00000-0xfeb00fff] has been reserved
[    0.255735] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.255992] pnp: PnP ACPI: found 7 devices
[    0.260978] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.260998] NET: Registered PF_INET protocol family
[    0.261070] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.262267] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.262284] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.262348] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.262493] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.262545] TCP: Hash tables configured (established 262144 bind 65536)
[    0.262591] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.262625] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.262658] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.262690] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.262692] NET: Registered PF_XDP protocol family
[    0.262699] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.262700] pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
[    0.262703] pci 0000:02:00.0:   bridge window [mem 0xfcc00000-0xfcdfffff]
[    0.262705] pci 0000:02:00.0:   bridge window [mem 0xf800000000-0xfc0fffffff 64bit pref]
[    0.262708] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[    0.262709] pci 0000:01:00.0:   bridge window [io  0xf000-0xffff]
[    0.262712] pci 0000:01:00.0:   bridge window [mem 0xfcc00000-0xfcdfffff]
[    0.262713] pci 0000:01:00.0:   bridge window [mem 0xf800000000-0xfc0fffffff 64bit pref]
[    0.262717] pci 0000:00:01.1: PCI bridge to [bus 01-03]
[    0.262717] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.262719] pci 0000:00:01.1:   bridge window [mem 0xfcc00000-0xfcefffff]
[    0.262720] pci 0000:00:01.1:   bridge window [mem 0xf800000000-0xfc0fffffff 64bit pref]
[    0.262729] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.262739] pci 0000:05:04.0: PCI bridge to [bus 07]
[    0.262745] pci 0000:05:05.0: PCI bridge to [bus 08]
[    0.262750] pci 0000:05:06.0: PCI bridge to [bus 09]
[    0.262756] pci 0000:05:07.0: PCI bridge to [bus 0a]
[    0.262762] pci 0000:05:08.0: PCI bridge to [bus 0b]
[    0.262767] pci 0000:05:09.0: PCI bridge to [bus 0c]
[    0.262773] pci 0000:05:0a.0: PCI bridge to [bus 0d]
[    0.262774] pci 0000:05:0a.0:   bridge window [io  0xe000-0xefff]
[    0.262776] pci 0000:05:0a.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.262780] pci 0000:05:0b.0: PCI bridge to [bus 0e]
[    0.262786] pci 0000:05:0c.0: PCI bridge to [bus 0f]
[    0.262788] pci 0000:05:0c.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.262792] pci 0000:05:0d.0: PCI bridge to [bus 10]
[    0.262794] pci 0000:05:0d.0:   bridge window [mem 0xfc900000-0xfc9fffff]
[    0.262798] pci 0000:04:00.0: PCI bridge to [bus 05-10]
[    0.262799] pci 0000:04:00.0:   bridge window [io  0xe000-0xefff]
[    0.262801] pci 0000:04:00.0:   bridge window [mem 0xfc900000-0xfcbfffff]
[    0.262805] pci 0000:00:02.1: PCI bridge to [bus 04-10]
[    0.262806] pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
[    0.262807] pci 0000:00:02.1:   bridge window [mem 0xfc900000-0xfcbfffff]
[    0.262824] pci 0000:00:08.1: PCI bridge to [bus 11]
[    0.262834] pci 0000:00:08.1:   bridge window [io  0xd000-0xdfff]
[    0.262835] pci 0000:00:08.1:   bridge window [mem 0xfc500000-0xfc8fffff]
[    0.262836] pci 0000:00:08.1:   bridge window [mem 0xfc20000000-0xfc301fffff 64bit pref]
[    0.262838] pci 0000:00:08.3: PCI bridge to [bus 12]
[    0.262839] pci 0000:00:08.3:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.262842] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.262842] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.262843] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.262843] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.262843] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.262844] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfcffffff window]
[    0.262844] pci_bus 0000:00: resource 10 [mem 0x880000000-0xffffffffff window]
[    0.262845] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.262845] pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcefffff]
[    0.262846] pci_bus 0000:01: resource 2 [mem 0xf800000000-0xfc0fffffff 64bit pref]
[    0.262846] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.262846] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcdfffff]
[    0.262847] pci_bus 0000:02: resource 2 [mem 0xf800000000-0xfc0fffffff 64bit pref]
[    0.262847] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.262847] pci_bus 0000:03: resource 1 [mem 0xfcc00000-0xfcdfffff]
[    0.262848] pci_bus 0000:03: resource 2 [mem 0xf800000000-0xfc0fffffff 64bit pref]
[    0.262848] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.262848] pci_bus 0000:04: resource 1 [mem 0xfc900000-0xfcbfffff]
[    0.262849] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.262849] pci_bus 0000:05: resource 1 [mem 0xfc900000-0xfcbfffff]
[    0.262850] pci_bus 0000:0d: resource 0 [io  0xe000-0xefff]
[    0.262850] pci_bus 0000:0d: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.262850] pci_bus 0000:0f: resource 1 [mem 0xfca00000-0xfcafffff]
[    0.262851] pci_bus 0000:10: resource 1 [mem 0xfc900000-0xfc9fffff]
[    0.262851] pci_bus 0000:11: resource 0 [io  0xd000-0xdfff]
[    0.262851] pci_bus 0000:11: resource 1 [mem 0xfc500000-0xfc8fffff]
[    0.262852] pci_bus 0000:11: resource 2 [mem 0xfc20000000-0xfc301fffff 64bit pref]
[    0.262852] pci_bus 0000:12: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.262911] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[    0.263024] pci 0000:11:00.1: D0 power state depends on 0000:11:00.0
[    0.263130] PCI: CLS 64 bytes, default 64
[    0.263132] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263133] software IO TLB: mapped [mem 0x00000000668be000-0x000000006a8be000] (64MB)
[    0.263150] Trying to unpack rootfs image as initramfs...
[    0.263157] LVT offset 0 assigned for vector 0x400
[    0.263190] perf: AMD IBS detected (0x00000bff)
[    0.263721] Initialise system trusted keyrings
[    0.263727] Key type blacklist registered
[    0.263739] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.263744] zbud: loaded
[    0.263792] integrity: Platform Keyring initialized
[    0.263793] integrity: Machine keyring initialized
[    0.265468] Key type asymmetric registered
[    0.265469] Asymmetric key parser 'x509' registered
[    0.265473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.265485] io scheduler mq-deadline registered
[    0.265486] io scheduler kyber registered
[    0.265489] io scheduler bfq registered
[    0.266296] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.266354] pcieport 0000:00:02.1: PME: Signaling with IRQ 27
[    0.266407] pcieport 0000:00:08.1: PME: Signaling with IRQ 28
[    0.266448] pcieport 0000:00:08.3: PME: Signaling with IRQ 29
[    0.267295] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.267354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.267361] ACPI: button: Power Button [PWRB]
[    0.267370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.268894] ACPI: button: Power Button [PWRF]
[    0.268935] Estimated ratio of average max frequency by base frequency (times 1024): 1106
[    0.268942] Monitor-Mwait will be used to enter C-1 state
[    0.268945] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[    0.269002] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[    0.272725] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[    0.272789] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[    0.272851] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[    0.272908] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[    0.272956] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[    0.273017] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[    0.273074] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[    0.273124] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[    0.273183] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[    0.273229] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[    0.308502] Freeing initrd memory: 41664K
[    1.309459] tsc: Refined TSC clocksource calibration: 4691.185 MHz
[    1.309468] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x439ee535b7a, max_idle_ns: 440795222088 ns
[    1.309493] clocksource: Switched to clocksource tsc
[    2.336625] ACPI: \_TZ_.TZ10: Invalid passive threshold
[    2.336756] thermal LNXTHERM:00: registered as thermal_zone0
[    2.336757] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.337087] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.337341] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.339043] Non-volatile memory driver v1.3
[    2.339043] Linux agpgart interface v0.103
[    2.370546] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    2.371085] ahci 0000:10:00.0: version 3.0
[    2.371161] ahci 0000:10:00.0: SSS flag set, parallel bus scan disabled
[    2.371185] ahci 0000:10:00.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0xf impl SATA mode
[    2.371186] ahci 0000:10:00.0: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.371363] scsi host0: ahci
[    2.371410] scsi host1: ahci
[    2.371453] scsi host2: ahci
[    2.371483] scsi host3: ahci
[    2.371525] scsi host4: ahci
[    2.371556] scsi host5: ahci
[    2.371564] ata1: SATA max UDMA/133 abar m1024@0xfc980000 port 0xfc980100 irq 44
[    2.371566] ata2: SATA max UDMA/133 abar m1024@0xfc980000 port 0xfc980180 irq 44
[    2.371567] ata3: SATA max UDMA/133 abar m1024@0xfc980000 port 0xfc980200 irq 44
[    2.371567] ata4: SATA max UDMA/133 abar m1024@0xfc980000 port 0xfc980280 irq 44
[    2.371568] ata5: DUMMY
[    2.371568] ata6: DUMMY
[    2.371598] ACPI: bus type drm_connector registered
[    2.371761] usbcore: registered new interface driver usbserial_generic
[    2.371763] usbserial: USB Serial support registered for generic
[    2.371787] rtc_cmos 00:03: RTC can wake from S4
[    2.371925] rtc_cmos 00:03: registered as rtc0
[    2.371948] rtc_cmos 00:03: setting system clock to 2023-07-22T07:14:43 UTC (1690010083)
[    2.371962] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.371975] amd_pstate: driver load is disabled, boot with specific mode to enable this
[    2.372010] ledtrig-cpu: registered to indicate activity on CPUs
[    2.372053] efifb: probing for efifb
[    2.372060] efifb: framebuffer at 0xf800000000, using 8100k, total 8100k
[    2.372060] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    2.372061] efifb: scrolling: redraw
[    2.372061] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.372074] fbcon: Deferring console take-over
[    2.372074] fb0: EFI VGA frame buffer device
[    2.372085] hid: raw HID events driver (C) Jiri Kosina
[    2.372136] drop_monitor: Initializing network drop monitor service
[    2.377251] Initializing XFRM netlink socket
[    2.377262] NET: Registered PF_INET6 protocol family
[    2.379767] Segment Routing with IPv6
[    2.379767] RPL Segment Routing with IPv6
[    2.379769] In-situ OAM (IOAM) with IPv6
[    2.379777] NET: Registered PF_PACKET protocol family
[    2.380116] microcode: CPU0: patch_level=0x0a601203
[    2.380117] microcode: CPU1: patch_level=0x0a601203
[    2.380118] microcode: CPU6: patch_level=0x0a601203
[    2.380118] microcode: CPU5: patch_level=0x0a601203
[    2.380118] microcode: CPU2: patch_level=0x0a601203
[    2.380119] microcode: CPU4: patch_level=0x0a601203
[    2.380119] microcode: CPU7: patch_level=0x0a601203
[    2.380120] microcode: CPU3: patch_level=0x0a601203
[    2.380120] microcode: CPU9: patch_level=0x0a601203
[    2.380120] microcode: CPU10: patch_level=0x0a601203
[    2.380120] microcode: CPU8: patch_level=0x0a601203
[    2.380122] microcode: CPU11: patch_level=0x0a601203
[    2.380132] microcode: Microcode Update Driver: v2.2.
[    2.380182] resctrl: L3 allocation detected
[    2.380182] resctrl: MB allocation detected
[    2.380183] resctrl: SMBA allocation detected
[    2.380183] resctrl: L3 monitoring detected
[    2.380185] IPI shorthand broadcast: enabled
[    2.380753] sched_clock: Marking stable (2380000694, 309840)->(2391755764, -11445230)
[    2.380814] registered taskstats version 1
[    2.380917] Loading compiled-in X.509 certificates
[    2.381985] Loaded X.509 cert 'Build time autogenerated kernel key: 25358cf64ac557a23404b7bae76ab17cacb68e13'
[    2.382607] zswap: loaded using pool zstd/zsmalloc
[    2.383106] Key type .fscrypt registered
[    2.383106] Key type fscrypt-provisioning registered
[    2.383290] PM:   Magic number: 15:567:218
[    2.383332] acpi device:69: hash matches
[    2.383337] acpi device:3c: hash matches
[    2.383365] memory memory100: hash matches
[    2.384314] RAS: Correctable Errors collector initialized.
[    2.845480] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.846567] ata1.00: supports DRM functions and may not be fully accessible
[    2.846570] ata1.00: ATA-10: CT2000MX500SSD1, M3CR023, max UDMA/133
[    2.846591] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.847384] ata1.00: Features: Trust Dev-Sleep
[    2.847475] ata1.00: supports DRM functions and may not be fully accessible
[    2.848153] ata1.00: configured for UDMA/133
[    2.848257] scsi 0:0:0:0: Direct-Access     ATA      CT2000MX500SSD1  023  PQ: 0 ANSI: 5
[    2.848426] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.848428] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.848436] sd 0:0:0:0: [sda] Write Protect is off
[    2.848437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.848445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.848461] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    2.849478]  sda: sda1 sda2 sda3
[    2.849627] sd 0:0:0:0: [sda] supports TCG Opal
[    2.849628] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.158747] ata2: SATA link down (SStatus 0 SControl 300)
[    4.093533] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.371810] ata3.00: ATA-9: ST8000AS0002-1NA17Z, RT18, max UDMA/133
[    4.372299] ata3.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.373725] ata3.00: configured for UDMA/133
[    4.373844] scsi 2:0:0:0: Direct-Access     ATA      ST8000AS0002-1NA RT18 PQ: 0 ANSI: 5
[    4.373992] sd 2:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    4.373994] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    4.374001] sd 2:0:0:0: [sdb] Write Protect is off
[    4.374003] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.374012] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.374023] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    4.409860]  sdb: sdb1
[    4.409956] sd 2:0:0:0: [sdb] Attached SCSI disk
[    4.845479] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.846811] ata4.00: ATA-9: ST8000AS0002-1NA17Z, AR15, max UDMA/133
[    4.846933] ata4.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.848154] ata4.00: configured for UDMA/133
[    4.848409] scsi 3:0:0:0: Direct-Access     ATA      ST8000AS0002-1NA AR15 PQ: 0 ANSI: 5
[    4.848553] sd 3:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    4.848556] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[    4.848559] sd 3:0:0:0: [sdc] Write Protect is off
[    4.848560] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.848566] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.848573] sd 3:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
[    4.892888]  sdc: sdc1
[    4.892980] sd 3:0:0:0: [sdc] Attached SCSI disk
[    4.893078] clk: Disabling unused clocks
[    4.893496] Freeing unused decrypted memory: 2036K
[    4.893606] Freeing unused kernel image (initmem) memory: 3528K
[    4.898317] Write protecting the kernel read-only data: 32768k
[    4.898432] Freeing unused kernel image (rodata/data gap) memory: 1716K
[    4.916514] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.916516] rodata_test: all tests were successful
[    4.916519] Run /init as init process
[    4.916519]   with arguments:
[    4.916520]     /init
[    4.916520]   with environment:
[    4.916520]     HOME=/
[    4.916521]     TERM=linux
[    4.916521]     BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
[    4.920558] systemd[1]: systemd 253.6-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.920561] systemd[1]: Detected architecture x86-64.
[    4.920561] systemd[1]: Running in initrd.
[    4.920592] systemd[1]: Hostname set to <J-G>.
[    4.952171] systemd[1]: Queued start job for default target Initrd Default Target.
[    4.972439] systemd[1]: Reached target Initrd /usr File System.
[    4.972457] systemd[1]: Reached target Local File Systems.
[    4.972464] systemd[1]: Reached target Slice Units.
[    4.972470] systemd[1]: Reached target Swaps.
[    4.972473] systemd[1]: Reached target Timer Units.
[    4.972507] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.972533] systemd[1]: Listening on Journal Socket.
[    4.972563] systemd[1]: Listening on udev Control Socket.
[    4.972585] systemd[1]: Listening on udev Kernel Socket.
[    4.972589] systemd[1]: Reached target Socket Units.
[    4.972880] systemd[1]: Starting Create List of Static Device Nodes...
[    4.973331] systemd[1]: Starting Journal Service...
[    4.973607] systemd[1]: Starting Load Kernel Modules...
[    4.973830] systemd[1]: Starting Setup Virtual Console...
[    4.973981] systemd[1]: Finished Create List of Static Device Nodes.
[    4.974239] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.975900] systemd[1]: systemd-vconsole-setup.service: Main process exited, code=exited, status=1/FAILURE
[    4.975937] systemd[1]: systemd-vconsole-setup.service: Failed with result 'exit-code'.
[    4.975976] systemd[1]: Failed to start Setup Virtual Console.
[    4.975984] fbcon: Taking over console
[    4.976010] Console: switching to colour frame buffer device 240x67
[    4.976838] systemd[1]: run-credentials-systemd\x2dvconsole\x2dsetup.service.mount: Deactivated successfully.

[Smurg]

part 2 of dmesg

[    4.977176] systemd[1]: Starting dracut ask for additional cmdline parameters...
[    4.977248] systemd-journald[199]: Collecting audit messages is disabled.
[    4.979388] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.980481] device-mapper: uevent: version 1.0.3
[    4.980508] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[    4.983317] i2c_dev: i2c /dev entries driver
[    4.983928] systemd[1]: Finished dracut ask for additional cmdline parameters.
[    4.984233] systemd[1]: Starting dracut cmdline hook...
[    4.984803] systemd[1]: Finished Load Kernel Modules.
[    4.985081] systemd[1]: Starting Apply Kernel Variables...
[    4.987134] systemd[1]: Finished Apply Kernel Variables.
[    4.989703] systemd[1]: Started Journal Service.
[    5.003658] raid6: skipped pq benchmark and selected avx512x4
[    5.003659] raid6: using avx512x2 recovery algorithm
[    5.004840] xor: automatically using best checksumming function   avx
[    5.058069] Btrfs loaded, zoned=yes, fsverity=yes
[    5.140150] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    5.140386] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:73/LNXVIDEO:00/input/input2
[    5.141077] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.141223] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    5.142435] xhci_hcd 0000:0f:00.0: xHCI Host Controller
[    5.142440] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 1
[    5.143402] ccp 0000:11:00.2: enabling device (0000 -> 0002)
[    5.143517] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    5.146113] cryptd: max_cpu_qlen set to 1000
[    5.146808] BTRFS: device fsid f343e266-2bba-4823-826a-311cb6319709 devid 1 transid 23606 /dev/sda2 scanned by (udev-worker) (314)
[    5.151287] AVX2 version of gcm_enc/dec engaged.
[    5.151305] AES CTR mode by8 optimization enabled
[    5.153619] ccp 0000:11:00.2: tee enabled
[    5.153626] ccp 0000:11:00.2: psp enabled
[    5.198418] xhci_hcd 0000:0f:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    5.198641] xhci_hcd 0000:0f:00.0: xHCI Host Controller
[    5.198644] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 2
[    5.198647] xhci_hcd 0000:0f:00.0: Host supports USB 3.2 Enhanced SuperSpeed
[    5.199415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[    5.199416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.199417] usb usb1: Product: xHCI Host Controller
[    5.199418] usb usb1: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.199419] usb usb1: SerialNumber: 0000:0f:00.0
[    5.199503] hub 1-0:1.0: USB hub found
[    5.199513] hub 1-0:1.0: 12 ports detected
[    5.203078] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.203089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[    5.203090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.203090] usb usb2: Product: xHCI Host Controller
[    5.203091] usb usb2: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.203091] usb usb2: SerialNumber: 0000:0f:00.0
[    5.203126] hub 2-0:1.0: USB hub found
[    5.203135] hub 2-0:1.0: 5 ports detected
[    5.204670] xhci_hcd 0000:11:00.3: xHCI Host Controller
[    5.204673] xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 3
[    5.205018] xhci_hcd 0000:11:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
[    5.205124] xhci_hcd 0000:11:00.3: xHCI Host Controller
[    5.205125] xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 4
[    5.205126] xhci_hcd 0000:11:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    5.205143] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[    5.205144] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.205144] usb usb3: Product: xHCI Host Controller
[    5.205145] usb usb3: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.205146] usb usb3: SerialNumber: 0000:11:00.3
[    5.205185] hub 3-0:1.0: USB hub found
[    5.205194] hub 3-0:1.0: 2 ports detected
[    5.205841] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.205851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[    5.205852] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.205853] usb usb4: Product: xHCI Host Controller
[    5.205853] usb usb4: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.205854] usb usb4: SerialNumber: 0000:11:00.3
[    5.205886] hub 4-0:1.0: USB hub found
[    5.205893] hub 4-0:1.0: 2 ports detected
[    5.206552] xhci_hcd 0000:11:00.4: xHCI Host Controller
[    5.206556] xhci_hcd 0000:11:00.4: new USB bus registered, assigned bus number 5
[    5.206896] xhci_hcd 0000:11:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
[    5.206997] xhci_hcd 0000:11:00.4: xHCI Host Controller
[    5.206999] xhci_hcd 0000:11:00.4: new USB bus registered, assigned bus number 6
[    5.207000] xhci_hcd 0000:11:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    5.207015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[    5.207016] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.207017] usb usb5: Product: xHCI Host Controller
[    5.207017] usb usb5: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.207018] usb usb5: SerialNumber: 0000:11:00.4
[    5.207057] hub 5-0:1.0: USB hub found
[    5.207062] hub 5-0:1.0: 2 ports detected
[    5.207705] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.207715] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[    5.207716] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.207717] usb usb6: Product: xHCI Host Controller
[    5.207717] usb usb6: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.207718] usb usb6: SerialNumber: 0000:11:00.4
[    5.207761] hub 6-0:1.0: USB hub found
[    5.207768] hub 6-0:1.0: 2 ports detected
[    5.208405] xhci_hcd 0000:12:00.0: xHCI Host Controller
[    5.208406] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 7
[    5.209671] xhci_hcd 0000:12:00.0: USB3 root hub has no ports
[    5.209673] xhci_hcd 0000:12:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[    5.209783] xhci_hcd 0000:12:00.0: xHCI Host Controller
[    5.209784] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 8
[    5.209785] xhci_hcd 0000:12:00.0: Host supports USB 3.0 SuperSpeed
[    5.209811] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[    5.209812] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.209813] usb usb7: Product: xHCI Host Controller
[    5.209813] usb usb7: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.209814] usb usb7: SerialNumber: 0000:12:00.0
[    5.209847] hub 7-0:1.0: USB hub found
[    5.209855] hub 7-0:1.0: 1 port detected
[    5.210185] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.210194] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[    5.210195] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.210196] usb usb8: Product: xHCI Host Controller
[    5.210196] usb usb8: Manufacturer: Linux 6.4.4-zen1-1-zen xhci-hcd
[    5.210197] usb usb8: SerialNumber: 0000:12:00.0
[    5.210227] hub 8-0:1.0: USB hub found
[    5.210229] hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.450312] usb 7-1: new high-speed USB device number 2 using xhci_hcd
[    5.504312] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    5.561376] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[    5.574109] usb 6-1: New USB device found, idVendor=152d, idProduct=0583, bcdDevice= 2.09
[    5.574111] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.574112] usb 6-1: Product: USB 3.0
[    5.574112] usb 6-1: Manufacturer: HDD
[    5.574113] usb 6-1: SerialNumber: DD564198838A2
[    5.580471] usb 7-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
[    5.580473] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.580474] usb 7-1: Product: USB2.0 Hub
[    5.626240] hub 7-1:1.0: USB hub found
[    5.626728] hub 7-1:1.0: 4 ports detected
[    5.797991] usb 1-2: New USB device found, idVendor=0bda, idProduct=8771, bcdDevice= 2.00
[    5.797993] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.797994] usb 1-2: Product: Bluetooth Radio
[    5.797995] usb 1-2: Manufacturer: Realtek
[    5.797995] usb 1-2: SerialNumber: 00E04C239987
[    5.894579] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    5.914311] usb 7-1.1: new full-speed USB device number 3 using xhci_hcd
[    5.918182] usb 2-4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 2.01
[    5.918184] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.918184] usb 2-4: Product: USB3.2 Hub
[    5.918185] usb 2-4: Manufacturer: Generic
[    5.925633] hub 2-4:1.0: USB hub found
[    5.927018] hub 2-4:1.0: 4 ports detected
[    5.953739] usbcore: registered new interface driver usb-storage
[    5.955998] scsi host6: uas
[    5.956035] usbcore: registered new interface driver uas
[    5.956330] scsi 6:0:0:0: Direct-Access     HDD      USB 3.0          0209 PQ: 0 ANSI: 6
[    5.956374] [drm] amdgpu kernel modesetting enabled.
[    5.956385] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[    5.956436] ATPX version 1, functions 0x00000000
[    5.958150] sd 6:0:0:0: [sdd] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    5.958151] sd 6:0:0:0: [sdd] 4096-byte physical blocks
[    5.958290] sd 6:0:0:0: [sdd] Write Protect is off
[    5.958291] sd 6:0:0:0: [sdd] Mode Sense: 53 00 00 08
[    5.958563] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.958564] sd 6:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
[    5.958565] sd 6:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[    5.959437] amdgpu: Ignoring ACPI CRAT on non-APU system
[    5.959438] amdgpu: Virtual CRAT table created for CPU
[    5.959442] amdgpu: Topology: Add CPU node
[    5.959488] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[    5.959507] [drm] initializing kernel modesetting (NAVY_FLOUNDER 0x1002:0x73DF 0x1043:0x05E7 0xC0).
[    5.959512] [drm] register mmio base: 0xFCC00000
[    5.959512] [drm] register mmio size: 1048576
[    5.960822] [drm] add ip block number 0 <nv_common>
[    5.960823] [drm] add ip block number 1 <gmc_v10_0>
[    5.960823] [drm] add ip block number 2 <navi10_ih>
[    5.960823] [drm] add ip block number 3 <psp>
[    5.960824] [drm] add ip block number 4 <smu>
[    5.960824] [drm] add ip block number 5 <dm>
[    5.960825] [drm] add ip block number 6 <gfx_v10_0>
[    5.960825] [drm] add ip block number 7 <sdma_v5_2>
[    5.960825] [drm] add ip block number 8 <vcn_v3_0>
[    5.960826] [drm] add ip block number 9 <jpeg_v3_0>
[    5.960834] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[    5.960835] amdgpu: ATOM BIOS: 115-D527BS0-100
[    5.964946]  sdd: sdd1 sdd2
[    5.964988] sd 6:0:0:0: [sdd] Attached SCSI disk
[    5.966890] [drm] VCN(0) decode is enabled in VM mode
[    5.966892] [drm] VCN(0) encode is enabled in VM mode
[    5.968795] [drm] JPEG decode is enabled in VM mode
[    5.968828] Console: switching to colour dummy device 80x25
[    5.968840] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[    5.968841] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[    5.968860] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    5.968864] amdgpu 0000:03:00.0: amdgpu: VRAM: 12272M 0x0000008000000000 - 0x00000082FEFFFFFF (12272M used)
[    5.968865] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    5.968865] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[    5.968871] [drm] Detected VRAM RAM=12272M, BAR=16384M
[    5.968872] [drm] RAM width 192bits GDDR6
[    5.968913] [drm] amdgpu: 12272M of VRAM memory ready
[    5.968914] [drm] amdgpu: 15618M of GTT memory ready.
[    5.968917] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.969017] [drm] PCIE GART of 512M enabled (table at 0x00000082FEB00000).
[    6.006323] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm
[    6.006327] BTRFS info (device sda2): using free space tree
[    6.017729] usb 7-1.1: New USB device found, idVendor=046d, idProduct=c08b, bcdDevice=27.03
[    6.017730] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.017731] usb 7-1.1: Product: G502 HERO Gaming Mouse
[    6.017732] usb 7-1.1: Manufacturer: Logitech
[    6.017732] usb 7-1.1: SerialNumber: 197638703731
[    6.089320] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    6.118783] input: Logitech G502 HERO Gaming Mouse as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.0/0003:046D:C08B.0001/input/input3
[    6.118815] hid-generic 0003:046D:C08B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input0
[    6.125849] input: Logitech G502 HERO Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.1/0003:046D:C08B.0002/input/input4
[    6.176314] usb 7-1.2: new full-speed USB device number 4 using xhci_hcd
[    6.177395] hid-generic 0003:046D:C08B.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input1
[    6.177410] usbcore: registered new interface driver usbhid
[    6.177411] usbhid: USB HID core driver
[    6.271750] usb 7-1.2: New USB device found, idVendor=258a, idProduct=001a, bcdDevice=32.04
[    6.271753] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.271754] usb 7-1.2: Product: Gaming KB
[    6.271755] usb 7-1.2: Manufacturer: Gaming KB
[    6.313178] usb 1-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 2.01
[    6.313181] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.313182] usb 1-4: Product: USB2.1 Hub
[    6.313183] usb 1-4: Manufacturer: Generic
[    6.321274] hub 1-4:1.0: USB hub found
[    6.325167] hub 1-4:1.0: 4 ports detected
[    6.325859] BTRFS info (device sda2): enabling ssd optimizations
[    6.325861] BTRFS info (device sda2): auto enabling async discard
[    6.367798] input: Gaming KB  Gaming KB  as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.2/7-1.2:1.0/0003:258A:001A.0003/input/input7
[    6.420384] hid-generic 0003:258A:001A.0003: input,hidraw2: USB HID v1.11 Keyboard [Gaming KB  Gaming KB ] on usb-0000:12:00.0-1.2/input0
[    6.423859] input: Gaming KB  Gaming KB  System Control as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.2/7-1.2:1.1/0003:258A:001A.0004/input/input8
[    6.475527] input: Gaming KB  Gaming KB  Consumer Control as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.2/7-1.2:1.1/0003:258A:001A.0004/input/input9
[    6.475567] input: Gaming KB  Gaming KB  Keyboard as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.2/7-1.2:1.1/0003:258A:001A.0004/input/input10
[    6.475611] hid-generic 0003:258A:001A.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Gaming KB  Gaming KB ] on usb-0000:12:00.0-1.2/input1
[    6.524325] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[    6.542319] usb 7-1.4: new full-speed USB device number 5 using xhci_hcd
[    6.634815] usb 7-1.4: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
[    6.634818] usb 7-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.634820] usb 7-1.4: Product: 2.4G Mouse
[    6.688893] input: 2.4G Mouse as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.4/7-1.4:1.0/0003:1EA7:0064.0005/input/input11
[    6.688948] input: 2.4G Mouse as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.4/7-1.4:1.0/0003:1EA7:0064.0005/input/input12
[    6.688985] hid-generic 0003:1EA7:0064.0005: input,hiddev98,hidraw4: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:12:00.0-1.4/input0
[    6.897020] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.897022] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.897024] usb 1-7: Product: ITE Device
[    6.897024] usb 1-7: Manufacturer: ITE Tech. Inc.
[    6.910920] hid-generic 0003:048D:5702.0006: hiddev99,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:0f:00.0-7/input0
[    7.829341] amdgpu 0000:03:00.0: amdgpu: STB initialized to 2048 entries
[    7.829410] [drm] Loading DMUB firmware via PSP: version=0x0202001E
[    7.829802] [drm] use_doorbell being set to: [true]
[    7.829810] [drm] use_doorbell being set to: [true]
[    7.829818] [drm] Found VCN firmware Version ENC: 1.27 DEC: 2 VEP: 0 Revision: 0
[    7.829821] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[    7.894142] [drm] reserve 0xa00000 from 0x82fd000000 for PSP TMR
[    7.999326] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    8.013955] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    8.013974] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000000e, smu fw if version = 0x00000012, smu fw program = 0, version = 0x00413a00 (65.58.0)
[    8.013975] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[    8.014002] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable
[    8.068001] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[    8.068161] [drm] Display Core initialized with v3.2.230!
[    8.068161] [drm] DP-HDMI FRL PCON supported
[    8.069610] [drm] DMUB hardware initialized: version=0x0202001E
[    8.185924] [drm] kiq ring mec 2 pipe 1 q 0
[    8.191370] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    8.191664] [drm] JPEG decode initialized successfully.
[    8.192647] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    8.192742] amdgpu: sdma_bitmap: ffff
[    8.212841] amdgpu: HMM registered 12272MB device memory
[    8.212929] amdgpu: SRAT table not found
[    8.212930] amdgpu: Virtual CRAT table created for GPU
[    8.213044] amdgpu: Topology: Add dGPU node [0x73df:0x1002]
[    8.213046] kfd kfd: amdgpu: added device 1002:73df
[    8.213064] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 40
[    8.213112] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[    8.213113] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    8.213114] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    8.213114] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    8.213115] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    8.213115] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    8.213116] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    8.213116] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    8.213116] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    8.213117] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    8.213117] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[    8.213117] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[    8.213118] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
[    8.213118] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
[    8.213119] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
[    8.213119] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[    8.214252] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm
[    8.214699] [drm] Initialized amdgpu 3.52.0 20150101 for 0000:03:00.0 on minor 0
[    8.220577] fbcon: amdgpudrmfb (fb0) is primary device
[    8.220723] [drm] DSC precompute is not needed.
[    8.412282] Console: switching to colour frame buffer device 240x67
[    8.431023] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    8.436514] amdgpu 0000:11:00.0: enabling device (0006 -> 0007)
[    8.436564] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x164E 0x1458:0xD000 0xC7).
[    8.436579] [drm] register mmio base: 0xFC800000
[    8.436579] [drm] register mmio size: 524288
[    8.437289] [drm] add ip block number 0 <nv_common>
[    8.437289] [drm] add ip block number 1 <gmc_v10_0>
[    8.437290] [drm] add ip block number 2 <navi10_ih>
[    8.437290] [drm] add ip block number 3 <psp>
[    8.437290] [drm] add ip block number 4 <smu>
[    8.437291] [drm] add ip block number 5 <dm>
[    8.437292] [drm] add ip block number 6 <gfx_v10_0>
[    8.437292] [drm] add ip block number 7 <sdma_v5_2>
[    8.437293] [drm] add ip block number 8 <vcn_v3_0>
[    8.437293] [drm] add ip block number 9 <jpeg_v3_0>
[    8.437303] amdgpu 0000:11:00.0: amdgpu: Fetched VBIOS from VFCT
[    8.437304] amdgpu: ATOM BIOS: 102-RAPHAEL-008
[    8.442286] [drm] VCN(0) decode is enabled in VM mode
[    8.442287] [drm] VCN(0) encode is enabled in VM mode
[    8.444136] [drm] JPEG decode is enabled in VM mode
[    8.444137] amdgpu 0000:11:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[    8.444162] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    8.444165] amdgpu 0000:11:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    8.444166] amdgpu 0000:11:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    8.444167] amdgpu 0000:11:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    8.444170] [drm] Detected VRAM RAM=512M, BAR=512M
[    8.444170] [drm] RAM width 128bits DDR5
[    8.444297] [drm] amdgpu: 512M of VRAM memory ready
[    8.444298] [drm] amdgpu: 15618M of GTT memory ready.
[    8.444301] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    8.444392] [drm] PCIE GART of 1024M enabled (table at 0x000000F41FC00000).
[    8.444504] [drm] Loading DMUB firmware via PSP: version=0x05000C00
[    8.444917] [drm] use_doorbell being set to: [true]
[    8.444930] [drm] Found VCN firmware Version ENC: 1.27 DEC: 2 VEP: 0 Revision: 0
[    8.444932] amdgpu 0000:11:00.0: amdgpu: Will use PSP to load VCN firmware
[    8.467019] [drm] reserve 0xa00000 from 0xf41e000000 for PSP TMR
[    8.534018] amdgpu 0000:11:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    8.539715] amdgpu 0000:11:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    8.539716] amdgpu 0000:11:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    8.540236] amdgpu 0000:11:00.0: amdgpu: smu driver if version = 0x00000004, smu fw if version = 0x00000005, smu fw program = 0, smu fw version = 0x00544fdd (84.79.221)
[    8.540237] amdgpu 0000:11:00.0: amdgpu: SMU driver if version not matched
[    8.541307] amdgpu 0000:11:00.0: amdgpu: SMU is initialized successfully!
[    8.541480] [drm] Display Core initialized with v3.2.230!
[    8.541480] [drm] DP-HDMI FRL PCON supported
[    8.542130] [drm] DMUB hardware initialized: version=0x05000C00
[    8.543707] [drm] kiq ring mec 2 pipe 1 q 0
[    8.545722] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    8.545738] [drm] JPEG decode initialized successfully.
[    8.546476] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    8.546510] amdgpu: sdma_bitmap: 3
[    8.558837] amdgpu: HMM registered 512MB device memory
[    8.559294] amdgpu: SRAT table not found
[    8.559294] amdgpu: Virtual CRAT table created for GPU
[    8.559456] amdgpu: Topology: Add dGPU node [0x164e:0x1002]
[    8.559457] kfd kfd: amdgpu: added device 1002:164e
[    8.559463] amdgpu 0000:11:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 2, active_cu_number 2
[    8.559496] amdgpu 0000:11:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[    8.559496] amdgpu 0000:11:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    8.559497] amdgpu 0000:11:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    8.559497] amdgpu 0000:11:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    8.559498] amdgpu 0000:11:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    8.559498] amdgpu 0000:11:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    8.559498] amdgpu 0000:11:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    8.559499] amdgpu 0000:11:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    8.559499] amdgpu 0000:11:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    8.559499] amdgpu 0000:11:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    8.559500] amdgpu 0000:11:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[    8.559500] amdgpu 0000:11:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
[    8.559500] amdgpu 0000:11:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
[    8.559501] amdgpu 0000:11:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
[    8.559501] amdgpu 0000:11:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[    8.559854] [drm] Initialized amdgpu 3.52.0 20150101 for 0000:11:00.0 on minor 1
[    8.563069] amdgpu 0000:11:00.0: [drm] Cannot find any crtc or sizes
[    8.601997] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    8.642883] systemd-journald[199]: Received SIGTERM from PID 1 (systemd).
[    8.731265] systemd[1]: systemd 253.6-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    8.731267] systemd[1]: Detected architecture x86-64.
[    8.780693] systemd[1]: bpf-lsm: LSM BPF program attached
[    8.808796] zram: Added device: zram0
[    8.900600] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[    8.906439] systemd[1]: Stopped Switch Root.
[    8.906622] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    8.906739] systemd[1]: Created slice Virtual Machine and Container Slice.
[    8.906862] systemd[1]: Created slice Slice /system/getty.
[    8.906960] systemd[1]: Created slice Slice /system/systemd-fsck.
[    8.907053] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[    8.907113] systemd[1]: Created slice User and Session Slice.
[    8.907121] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[    8.907138] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.907199] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.907211] systemd[1]: Reached target Local Encrypted Volumes.
[    8.907216] systemd[1]: Reached target Login Prompts.
[    8.907223] systemd[1]: Stopped target Switch Root.
[    8.907229] systemd[1]: Stopped target Initrd File Systems.
[    8.907232] systemd[1]: Stopped target Initrd Root File System.
[    8.907236] systemd[1]: Reached target Local Integrity Protected Volumes.
[    8.907247] systemd[1]: Reached target Remote File Systems.
[    8.907252] systemd[1]: Reached target Slice Units.
[    8.907263] systemd[1]: Reached target Local Verity Protected Volumes.
[    8.907288] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.907863] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.908189] systemd[1]: Listening on Process Core Dump Socket.
[    8.908440] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[    8.908718] systemd[1]: Listening on udev Control Socket.
[    8.908746] systemd[1]: Listening on udev Kernel Socket.
[    8.920365] systemd[1]: Mounting Huge Pages File System...
[    8.920646] systemd[1]: Mounting POSIX Message Queue File System...
[    8.920935] systemd[1]: Mounting Kernel Debug File System...
[    8.921195] systemd[1]: Mounting Kernel Trace File System...
[    8.921549] systemd[1]: Starting Create List of Static Device Nodes...
[    8.921825] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.922124] systemd[1]: Starting Load Kernel Module configfs...
[    8.922409] systemd[1]: Starting Load Kernel Module dm_mod...
[    8.922689] systemd[1]: Starting Load Kernel Module drm...
[    8.922991] systemd[1]: Starting Load Kernel Module fuse...
[    8.923265] systemd[1]: Starting Load Kernel Module loop...
[    8.923287] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[    8.927563] loop: module loaded
[    8.931810] fuse: init (API version 7.38)
[    8.939346] systemd[1]: Stopped Plymouth switch root service.
[    8.939407] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[    8.951322] systemd[1]: Stopped File System Check on Root Device.
[    8.951350] systemd[1]: Stopped Journal Service.
[    8.963380] systemd[1]: Starting Journal Service...
[    8.963731] systemd[1]: Starting Load Kernel Modules...
[    8.963749] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    8.964033] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.964333] systemd[1]: Starting Coldplug All udev Devices...
[    8.964806] systemd[1]: Mounted Huge Pages File System.
[    8.964859] systemd[1]: Mounted POSIX Message Queue File System.
[    8.964896] systemd[1]: Mounted Kernel Debug File System.
[    8.964932] systemd[1]: Mounted Kernel Trace File System.
[    8.969220] systemd-journald[507]: Collecting audit messages is disabled.
[    8.977382] systemd[1]: Finished Create List of Static Device Nodes.
[    8.977477] systemd[1]: Started Journal Service.
[    9.221101] BTRFS info (device sda2: state M): use zstd compression, level 3
[    9.372925] zram0: detected capacity change from 0 to 63973376
[    9.434961] ahci 0000:10:00.0: port does not support device sleep
[    9.436087] Adding 31986684k swap on /dev/zram0.  Priority:100 extents:1 across:31986684k SSDscFS
[    9.459862] mousedev: PS/2 mouse device common for all mice
[    9.460582] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20230331/utaddress-204)
[    9.460588] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    9.466281] Adding 35185944k swap on /dev/sda3.  Priority:-2 extents:1 across:35185944k SSFS
[    9.470564] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    9.470565] RAPL PMU: hw unit of domain package 2^-16 Joules
[    9.490190] r8169 0000:0d:00.0 eth0: RTL8125B, 74:56:3c:38:31:cf, XID 641, IRQ 84
[    9.490194] r8169 0000:0d:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    9.515659] r8169 0000:0d:00.0 enp13s0: renamed from eth0
[    9.536717] Bluetooth: Core ver 2.22
[    9.536725] NET: Registered PF_BLUETOOTH protocol family
[    9.536726] Bluetooth: HCI device and connection manager initialized
[    9.536728] Bluetooth: HCI socket layer initialized
[    9.536729] Bluetooth: L2CAP socket layer initialized
[    9.536731] Bluetooth: SCO socket layer initialized
[    9.542235] kvm_amd: TSC scaling supported
[    9.542237] kvm_amd: Nested Virtualization enabled
[    9.542237] kvm_amd: Nested Paging enabled
[    9.542239] kvm_amd: Virtual VMLOAD VMSAVE supported
[    9.542239] kvm_amd: Virtual GIF supported
[    9.542240] kvm_amd: Virtual NMI enabled
[    9.542240] kvm_amd: LBR virtualization supported
[    9.543582] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[    9.543686] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[    9.543687] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[    9.543866] snd_hda_intel 0000:11:00.1: enabling device (0000 -> 0002)
[    9.543897] snd_hda_intel 0000:11:00.1: Handle vga_switcheroo audio client
[    9.543927] snd_hda_intel 0000:11:00.6: enabling device (0000 -> 0002)
[    9.547170] MCE: In-kernel MCE decoding enabled.
[    9.551351] snd_hda_intel 0000:11:00.1: bound 0000:11:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    9.552786] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    9.553642] usbcore: registered new interface driver btusb
[    9.554202] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:11:00.1/sound/card1/input13
[    9.554228] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:11:00.1/sound/card1/input14
[    9.554249] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:11:00.1/sound/card1/input15
[    9.554274] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:11:00.1/sound/card1/input16
[    9.554291] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input17
[    9.554332] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input18
[    9.554355] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input19
[    9.554376] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input20
[    9.554393] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input21
[    9.554410] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input22
[    9.557135] intel_rapl_common: Found RAPL domain package
[    9.557136] intel_rapl_common: Found RAPL domain core
[    9.558728] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[    9.561712] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    9.561714] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[    9.563590] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[    9.563610] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[    9.576540] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.576543] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.576543] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.576544] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    9.576545] snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x1e/0x0
[    9.576545] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    9.576546] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[    9.576547] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[    9.586747] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:11:00.6/sound/card2/input23
[    9.586770] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:11:00.6/sound/card2/input24
[    9.586788] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:11:00.6/sound/card2/input25
[    9.586805] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:11:00.6/sound/card2/input26
[    9.983411] systemd-journald[507]: Received client request to flush runtime journal.
[    9.998987] systemd-journald[507]: /var/log/journal/eedae096e76f436588da4f49fcc34709/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[    9.998989] systemd-journald[507]: Rotating system journal.
[   10.311733] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   11.079346] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.079347] Bluetooth: BNEP filters: protocol multicast
[   11.079349] Bluetooth: BNEP socket layer initialized
[   11.079778] Bluetooth: MGMT ver 1.22
[   11.099014] NET: Registered PF_ALG protocol family
[   11.308322] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-d00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-d00:00, irq=MAC)
[   11.332043] NET: Registered PF_QIPCRTR protocol family
[   11.473497] r8169 0000:0d:00.0 enp13s0: Link is Down
[   11.488155] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   11.650587] amdgpu 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[   11.650589] amdgpu 0000:11:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[   11.860318] r8169 0000:0d:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM
[   13.021886] systemd-journald[507]: /var/log/journal/eedae096e76f436588da4f49fcc34709/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[   14.109542] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0: link becomes ready
[   14.109619] r8169 0000:0d:00.0 enp13s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.934431] Bluetooth: RFCOMM TTY layer initialized
[   15.934436] Bluetooth: RFCOMM socket layer initialized
[   15.934438] Bluetooth: RFCOMM ver 1.11
[   19.101760] input: Logitech Wireless Mouse PID:4038 as /devices/virtual/input/input27
[   19.102483] input: Touchscreen passthrough as /devices/virtual/input/input28
[   19.102598] input: Keyboard passthrough as /devices/virtual/input/input29
[   20.133721] input: Logitech Wireless Mouse PID:4038 as /devices/virtual/input/input30
[   20.140679] input: Touchscreen passthrough as /devices/virtual/input/input31
[   20.140829] input: Keyboard passthrough as /devices/virtual/input/input32
[   20.411423] input: WH-1000XM5 (AVRCP) as /devices/virtual/input/input33
[   48.179287] BTRFS info: devid 1 device path /dev/sda2 changed to /dev/disk/by-uuid/f343e266-2bba-4823-826a-311cb6319709 scanned by Thread (pooled) (9026)
[ 1341.888940] systemd-journald[507]: Data hash table of /var/log/journal/eedae096e76f436588da4f49fcc34709/user-1000.journal has a fill level at 75.0 (8533 of 11377 items, 6553600 file size, 768 bytes per hash table item), suggesting rotation.
[ 1341.888944] systemd-journald[507]: /var/log/journal/eedae096e76f436588da4f49fcc34709/user-1000.journal: Journal header limits reached or header out-of-date, rotating.
[ 2067.001904] input: Logitech G502 HERO Gaming Mouse as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.0/0003:046D:C08B.0007/input/input34
[ 2067.001972] hid-generic 0003:046D:C08B.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input0
[ 2067.075932] input: Logitech G502 HERO Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.1/0003:046D:C08B.0008/input/input35
[ 2067.127886] hid-generic 0003:046D:C08B.0008: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input1
[ 2391.154618] input: WH-1000XM5 (AVRCP) as /devices/virtual/input/input38
[ 2538.455209] input: Logitech G502 HERO Gaming Mouse as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.0/0003:046D:C08B.0009/input/input39
[ 2538.455293] hid-generic 0003:046D:C08B.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input0
[ 2538.520249] input: Logitech G502 HERO Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.1/0003:046D:C08B.000A/input/input40
[ 2538.571524] hid-generic 0003:046D:C08B.000A: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input1
[ 2541.955305] input: Logitech G502 HERO Gaming Mouse as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.0/0003:046D:C08B.000B/input/input43
[ 2541.955484] hid-generic 0003:046D:C08B.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input0
[ 2542.035237] input: Logitech G502 HERO Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.3/0000:12:00.0/usb7/7-1/7-1.1/7-1.1:1.1/0003:046D:C08B.000C/input/input44
[ 2542.086582] hid-generic 0003:046D:C08B.000C: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G502 HERO Gaming Mouse] on usb-0000:12:00.0-1.1/input1

[Smurg]

also here is my journal https://file.io/nUAmrCYcMHxb

[NaN]

I am sorry but could you please post your journal output to garuda's privatebin

Garuda's PrivateBin

once done click on the Send button up top it will generate a URL. Can you please post that URL here. I am not really comfortable downloading files from unknown sources online. I might not necessarily have solution to your troubles but thought I should tell you about this. I hope you understand.

[BrutalBirdie]

Garuda's PrivateBin

I did it for him

---

Now Timestamps where it crashed would be good so people don't have so read the WHOLE log.

[Smurg]

next time it happens il post the journal with time stamps

[Smurg]

I have 2 journals here the first crashed at about 11:47 PM

Garuda's PrivateBin

the second at about 03:13 AM Garuda's PrivateBin
although one thing that i noticed was "amdgpu: amdgpu_cs_query_fence_status failed" although i dont know weather this is a symptom of the crash or the cause.

[Bro]

@Smurg

“amdgpu: amdgpu_cs_query_fence_status failed”

Search on that error message.

[Smurg]

So i looked into it but i didnt see much except people saying to try changing to mesa-git but running "pamac install mesa-git" i get "removing vulkan-mesa-layers breaks dependency 'vulkan-mesa-layers' required by garuda-video-linux-config" is remoning removing garuda-video-linux-config a bad idea?

[NaN]

@Smurg

remoning removing garuda-video-linux-config a bad idea

Yes it is. It is a meta package that installs the following packages.

xf86-video-ati  xf86-video-amdgpu  xf86-video-nouveau  vulkan-intel  vulkan-radeon
intel-media-driver  libvdpau-va-gl  libva-intel-driver  libva-mesa-driver  mesa-vdpau
vulkan-mesa-layers  vulkan-swrast  lib32-vulkan-intel  lib32-vulkan-radeon
lib32-mesa-vdpau  lib32-libva-intel-driver  lib32-libva-mesa-driver
lib32-vulkan-mesa-layers

So removing this package essentially means losing any ability to have a graphical output at all while using your system unless you wanna run your system headless which I doubt you wanna do, don’t remove this package.

@Smurg

removing vulkan-mesa-layers breaks dependency ‘vulkan-mesa-layers’ required by garuda-video-linux-config

Why are you removing vulkan-mesa-layers I don’t see it as a dependency for mesa nor in the conflict list of mesa-git. This is perhaps a bug of using pamac. Please use paru instead to download aur packages.

paru -S mesa-git

[Smurg]

Ok i tried that now ive got this

paru -S mesa-git

:: Resolving dependencies...
:: Calculating conflicts...
:: Calculating inner conflicts...

:: Conflicts found:
mesa-git: mesa (mesa-libgl)  vulkan-mesa-layers (vulkan-mesa-layer)  mesa  vulkan-intel  vulkan-radeon  libva-mesa-driver  mesa-vdpau  vulkan-swrast  mesa (mesa-libgl)

:: Conflicting packages will have to be confirmed manually

Repo (1) libclc-15.0.7-1
Repo Make (6) python-markupsafe-2.1.3-1  python-mako-1.2.4-3  elfutils-0.189-1  python-tqdm-4.65.0-3  meson-1.2.0-2  directx-headers-1.610.0-1
Aur (1) mesa-git-23.3.0_devel.174362.a944a8eba93.d41d8cd-1

:: Proceed to review? [Y/n]: y

:: Downloading PKGBUILDs...
PKGBUILDs up to date
/home/j/.cache/paru/clone/mesa-git/.gitignore
mesa-git-*
mesa
pkg
src



/home/j/.cache/paru/clone/mesa-git/LICENSE
Disclaimer

Mesa is a 3-D graphics library with an API which is very similar to
that of OpenGL*
To the extent that Mesa utilizes the OpenGL command syntax or state
machine, it is being used with authorization from Silicon Graphics,
Inc.(SGI). However, the author does not possess an OpenGL license
from SGI, and makes no claim that Mesa is in any way a compatible
replacement for OpenGL or associated with SGI. Those who want a
licensed implementation of OpenGL should contact a licensed
vendor.

Please do not refer to the library as MesaGL (for legal
reasons). It's just Mesa or The Mesa 3-D graphics
library

* OpenGL is a trademark of Silicon Graphics Incorporated.

License / Copyright Information

The Mesa distribution consists of several components.  Different copyrights
and licenses apply to different components.  For example, GLUT is copyrighted
by Mark Kilgard, some demo programs are copyrighted by SGI, some of the Mesa
device drivers are copyrighted by their authors.  See below for a list of
Mesa's main components and the license for each.

The core Mesa library is licensed according to the terms of the MIT license.
This allows integration with the XFree86, Xorg and DRI projects.

The default Mesa license is as follows:

Copyright (C) 1999-2007  Brian Paul   All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Attention, Contributors

When contributing to the Mesa project you must agree to the licensing terms
of the component to which you're contributing.
The following section lists the primary components of the Mesa distribution
and their respective licenses.


Mesa Component Licenses

Component         Location               Primary Author      License
----------------------------------------------------------------------------
Main Mesa code    src/mesa/              Brian Paul          Mesa (MIT)

Device drivers    src/mesa/drivers/*     See drivers         See drivers

Ext headers       include/GL/glext.h     SGI                 SGI Free B
include/GL/glxext.h

GLUT              src/glut/              Mark Kilgard        Mark's copyright

Mesa GLU library  src/glu/mesa/          Brian Paul          GNU-LGPL

SGI GLU library   src/glu/sgi/           SGI                 SGI Free B

demo programs     progs/demos/           various             see source files

X demos           progs/xdemos/          Brian Paul          see source files

SGI demos         progs/samples/         SGI                 SGI copyright

RedBook demos     progs/redbook/         SGI                 SGI copyright


/home/j/.cache/paru/clone/mesa-git/PKGBUILD
# Maintainer: Reza Jahanbakhshi <reza.jahanbakhshi at gmail dot com
# Contributor: Lone_Wolf <[email protected]>
# Contributor: Armin K. <krejzi at email dot com>
# Contributor: Kristian Klausen <[email protected]>
# Contributor: Egon Ashrafinia <[email protected]>
# Contributor: Tavian Barnes <[email protected]>
# Contributor: Jan de Groot <[email protected]>
# Contributor: Andreas Radke <[email protected]>
# Contributor: Thomas Dziedzic < gostrc at gmail >
# Contributor: Antti "Tera" Oja <[email protected]>
# Contributor: Diego Jose <[email protected]>

pkgname=mesa-git
pkgdesc="an open-source implementation of the OpenGL specification, git version"
pkgver=23.3.0_devel.174362.a944a8eba93.d41d8cd
pkgrel=1
arch=('x86_64')
makedepends=('git' 'python-mako' 'xorgproto'
'libxml2' 'libx11'  'libvdpau' 'libva' 'elfutils' 'libxrandr'
'wayland-protocols' 'meson' 'ninja' 'glslang' 'directx-headers' 'libclc')
depends=('libdrm' 'libxxf86vm' 'libxdamage' 'libxshmfence' 'libelf'
'libomxil-bellagio' 'libunwind' 'libglvnd' 'wayland' 'lm_sensors' 'libclc' 'vulkan-icd-loader' 'zstd' 'expat')
optdepends=('opengl-man-pages: for the OpenGL API man pages')
provides=('mesa' 'opencl-mesa' 'vulkan-intel' 'vulkan-radeon' 'vulkan-mesa-layer' 'libva-mesa-driver' 'mesa-vdpau' 'vulkan-swrast' 'vulkan-driver' 'mesa-libgl' 'opengl->
conflicts=('mesa' 'opencl-mesa' 'vulkan-intel' 'vulkan-radeon' 'vulkan-mesa-layer' 'libva-mesa-driver' 'mesa-vdpau' 'vulkan-swrast' 'mesa-libgl')
url="https://www.mesa3d.org"
license=('custom')
source=('mesa::git+https://gitlab.freedesktop.org/mesa/mesa.git#branch=main'
'LICENSE'
)
md5sums=('SKIP'
'5c65a0fe315dd347e09b1f2826a1df5a')
sha512sums=('SKIP'
'25da77914dded10c1f432ebcbf29941124138824ceecaf1367b3deedafaecabc082d463abcfa3d15abff59f177491472b505bcb5ba0c4a51bb6b93b4721a23c2')

# NINJAFLAGS is an env var used to pass commandline options to ninja
# NOTE: It's your responbility to validate the value of $NINJAFLAGS. If unsure, don't set it.

# MESA_WHICH_LLVM is an environment variable that determines which llvm package tree is used to built mesa-git against.
# Adding a line to ~/.bashrc  that sets this value is the simplest way to ensure a specific choice.
#
# NOTE: Aur helpers don't handle this method well, check the sticky comments on mesa-git aur page .
#
# 1: llvm-minimal-git (aur) preferred value
# 2: AUR llvm-git
# 3: llvm-git from LordHeavy unofficial repo
# 4  llvm (stable from extra) Default value
#

if [[ ! $MESA_WHICH_LLVM ]] ; then
MESA_WHICH_LLVM=4
fi

case $MESA_WHICH_LLVM in
1)
# aur llvm-minimal-git
makedepends+=('llvm-minimal-git')
depends+=('llvm-libs-minimal-git')
;;
2)
# aur llvm-git
# depending on aur-llvm-* to avoid mixup with LH llvm-git
makedepends+=('aur-llvm-git')
depends+=('aur-llvm-libs-git')
optdepends+=('aur-llvm-git: opencl')
;;
3)
# mesa-git/llvm-git (lordheavy unofficial repo)
makedepends+=('llvm-git' 'clang-git')
depends+=('llvm-libs-git')
optdepends+=('clang-git: opencl' 'compiler-rt: opencl')
;;
4)
# extra/llvm
makedepends+=(llvm=15.0.7 clang=15.0.7)
depends+=(llvm-libs=15.0.7)
optdepends+=('clang: opencl' 'compiler-rt: opencl')
;;
*)
esac

pkgver() {
cd mesa
local _ver
_ver=$(<VERSION)

local _patchver
local _patchfile
for _patchfile in "${source[@]}"; do
_patchfile="${_patchfile%%::*}"
_patchfile="${_patchfile##*/}"
[[ $_patchfile = *.patch ]] || continue
_patchver="${_patchver}$(md5sum ${srcdir}/${_patchfile} | cut -c1-32)"
done
_patchver="$(echo -n $_patchver | md5sum | cut -c1-7)"

echo ${_ver/-/_}.$(git rev-list --count HEAD).$(git rev-parse --short HEAD).${_patchver}
}

prepare() {
# although removing _build folder in build() function feels more natural,
# that interferes with the spirit of makepkg --noextract
if [  -d _build ]; then
rm -rf _build
fi

local _patchfile
for _patchfile in "${source[@]}"; do
_patchfile="${_patchfile%%::*}"
_patchfile="${_patchfile##*/}"
[[ $_patchfile = *.patch ]] || continue
echo "Applying patch $_patchfile..."
patch --directory=mesa --forward --strip=1 --input="${srcdir}/${_patchfile}"
done
}

build () {
meson setup mesa _build \
-D b_ndebug=true \
-D b_lto=false \
-D platforms=x11,wayland \
-D gallium-drivers=r300,r600,radeonsi,nouveau,virgl,svga,swrast,i915,iris,crocus,zink,d3d12 \
-D vulkan-drivers=amd,intel,swrast,virtio,intel_hasvk \
-D vulkan-layers=device-select,overlay \
-D dri3=enabled \
-D egl=enabled \
-D gallium-extra-hud=true \
-D gallium-nine=true \
-D gallium-omx=bellagio \
-D gallium-opencl=disabled \
-D gallium-va=enabled \
-D gallium-vdpau=enabled \
-D gallium-xa=enabled \
-D gbm=enabled \
-D gles1=disabled \
-D gles2=enabled \
-D glvnd=true \
-D glx=dri \
-D libunwind=enabled \
-D llvm=enabled \
-D lmsensors=enabled \
-D osmesa=true \
-D shared-glapi=enabled \
-D microsoft-clc=disabled \
-D valgrind=disabled \
-D tools=[] \
-D zstd=enabled \
-D video-codecs=vc1dec,h264dec,h264enc,h265dec,h265enc \
-D buildtype=plain \
--wrap-mode=nofallback \
-D prefix=/usr \
-D sysconfdir=/etc

meson configure --no-pager _build

ninja $NINJAFLAGS -C _build
}

package() {
DESTDIR="${pkgdir}" ninja $NINJAFLAGS -C _build install

# remove script file from /usr/bin
# https://gitlab.freedesktop.org/mesa/mesa/issues/2230
rm "${pkgdir}/usr/bin/mesa-overlay-control.py"
rmdir "${pkgdir}/usr/bin"

# indirect rendering
ln -s /usr/lib/libGLX_mesa.so.0 "${pkgdir}/usr/lib/libGLX_indirect.so.0"

install -m644 -Dt "${pkgdir}/usr/share/licenses/${pkgname}" "${srcdir}/LICENSE"
}


(END)

[BluishHumility]

Press Q to exit the PKGBUILD.

[Smurg]

Ok did that then i got this

==> Starting build()...
The Meson build system
Version: 1.2.0
Source dir: /home/j/.cache/paru/clone/mesa-git/src/mesa
Build dir: /home/j/.cache/paru/clone/mesa-git/src/_build
Build type: native build
Project name: mesa
Project version: 23.3.0-devel
C compiler for the host machine: cc (gcc 13.1.1 "cc (GCC) 13.1.1 20230714")
C linker for the host machine: cc ld.bfd 2.40.0
C++ compiler for the host machine: c++ (gcc 13.1.1 "c++ (GCC) 13.1.1 20230714")
C++ linker for the host machine: c++ ld.bfd 2.40.0
Host machine cpu family: x86_64
Host machine cpu: x86_64
Checking if "-mtls-dialect=gnu2" runs: YES
Checking if "split TLSDESC" : links: YES
Found pkg-config: /usr/bin/pkg-config (1.8.1)
Found CMake: /usr/bin/cmake (3.27.1)
Run-time dependency directx-headers found: NO (tried pkgconfig and cmake)
Run-time dependency directx-headers found: YES 1.610.0
Run-time dependency vdpau found: YES 1.5
Program glslangValidator found: NO

mesa/meson.build:556:17: ERROR: Program 'glslangValidator' not found or not executable

A full log can be found at /home/j/.cache/paru/clone/mesa-git/src/_build/meson-logs/meson-log.txt
==> ERROR: A failure occurred in build().
Aborting...
error: failed to build 'mesa-git-23.3.0_devel.174362.a944a8eba93.d41d8cd-1':
error: packages failed to build: mesa-git-23.3.0_devel.174362.a944a8eba93.d41d8cd-1

[Smurg]

Ok i got glslangValidator fixed but now im back here.

.
==> Finished making: mesa-git 23.3.0_devel.174909.8d7f682bdba.d41d8cd-1 (Sun 30 Jul 2023 16:51:00)
==> Cleaning up...
[sudo] password for j:
loading packages...
resolving dependencies...
looking for conflicting packages...
:: mesa-git and mesa are in conflict. Remove mesa? [y/N] y
:: mesa-git and vulkan-intel are in conflict. Remove vulkan-intel? [y/N] y
:: mesa-git and vulkan-radeon are in conflict. Remove vulkan-radeon? [y/N] y
:: mesa-git and libva-mesa-driver are in conflict. Remove libva-mesa-driver? [y/N] y
:: mesa-git and mesa-vdpau are in conflict. Remove mesa-vdpau? [y/N] y
:: mesa-git and vulkan-swrast are in conflict. Remove vulkan-swrast? [y/N] y
:: mesa-git and vulkan-mesa-layers are in conflict (vulkan-mesa-layer). Remove vulkan-mesa-layers? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: removing vulkan-mesa-layers breaks dependency 'vulkan-mesa-layers' required by garuda-video-linux-config
:: removing vulkan-mesa-layers breaks dependency 'vulkan-mesa-layers' required by lib32-vulkan-mesa-layers

[NaN]

It seems you have no workaround but to remove it. Though be careful and keep a live USB handy just in case after reboot things go south and rolling back a snapshot doesn’t work and you need to reinstall the packages using chroot.

I looked at a few forum threads and people have confirmed that removing this package is the only way ahead. So I don’t suppose there should be any major issues but never hurts to be ready.

example,

Garuda-video-linux-config blocking mesa-git

As per topic says; I want mesa-git for testing but garuda-video-linux-config is blocking it. Do I force ignore conflict or remove garuda-video-linux-config?