Close, maximize and minimize button style changed after update

After update, maximize, minimize, and closed button looks are changed. I want the old look back.



After Update:



Kernel: 5.15.22-1-lts x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=86cba8f1-a3f8-46fb-95c6-22cb8cde4b62 rw [email protected]
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=3cb7fd42-cd5f-40e3-b0d8-833b9cf6475c loglevel=3
Desktop: KDE Plasma 5.24.0 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Type: Laptop System: HP product: HP Pavilion Gaming Laptop 15-ec2xxx v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 88DD v: 96.31 serial: <superuser required> UEFI: AMI
v: F.15 date: 08/18/2021
ID-1: BAT0 charge: 46.2 Wh (93.5%) condition: 49.4/49.4 Wh (100.0%)
volts: 13.0 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
status: Charging
Info: model: AMD Ryzen 5 5600H with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA50000C
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1536 high: 2327 min/max: 1200/4280 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1319 2: 1284
3: 1207 4: 1397 5: 1263 6: 1586 7: 1712 8: 2327 9: 1753 10: 1795 11: 1599
12: 1198 bogomips: 79050
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
IBRS_FW, STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Device-1: NVIDIA TU117M vendor: Hewlett-Packard driver: nvidia v: 510.47.03
alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:1f99
class-ID: 0300
Device-2: AMD Cezanne vendor: Hewlett-Packard driver: amdgpu v: kernel
bus-ID: 05:00.0 chip-ID: 1002:1638 class-ID: 0300
Device-3: Luxvisions Innotech Limited HP TrueVision HD Camera type: USB
driver: uvcvideo bus-ID: 3-3:2 chip-ID: 30c9:0035 class-ID: fe01
serial: <filter>
Display: x11 server: X.Org compositor: kwin_x11 driver:
loaded: modesetting,nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 hz: 144 dpi: 142
size: 344x193mm (13.5x7.6") diag: 394mm (15.5")
OpenGL: renderer: AMD RENOIR (DRM 3.42.0 5.15.22-1-lts LLVM 13.0.0)
v: 4.6 Mesa 21.3.5 direct render: Yes
Device-1: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:10fa class-ID: 0403
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
vendor: Hewlett-Packard driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x bus-ID: 05:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 05:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.15.22-1-lts running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.45 running: yes
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: e000 bus-ID: 02:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Realtek RTL8852AE 802.11ax PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw89_pci v: N/A modules: rtw89pci
port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8852 class-ID: 0280
IF: wlo1 state: up mac: <filter>
IF-ID-1: docker0 state: down mac: <filter>
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
bus-ID: 1-4:2 chip-ID: 0bda:2852 class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Local Storage: total: 476.94 GiB used: 35.15 GiB (7.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron
model: MTFDHBA512TDV-1AZ1AABHA size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: HPS0032 temp: 41.9 C scheme: GPT
ID-1: / raw-size: 466.65 GiB size: 466.65 GiB (100.00%)
used: 35.15 GiB (7.5%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 466.65 GiB size: 466.65 GiB (100.00%)
used: 35.15 GiB (7.5%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
ID-4: /var/log raw-size: 466.65 GiB size: 466.65 GiB (100.00%)
used: 35.15 GiB (7.5%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
ID-5: /var/tmp raw-size: 466.65 GiB size: 466.65 GiB (100.00%)
used: 35.15 GiB (7.5%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 10 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: swap-2 type: zram size: 15.04 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
System Temperatures: cpu: 50.0 C mobo: N/A gpu: amdgpu temp: 45.0 C
Fan Speeds (RPM): N/A
Processes: 361 Uptime: 21m wakeups: 1 Memory: 15.04 GiB
used: 3.35 GiB (22.3%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.1.0 clang: 13.0.1 Packages: pacman: 1286 lib: 329 Shell: fish
v: 3.3.1 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.12
Garuda (2.5.4-2):
System install date:     2022-01-14
Last full system update: 2022-02-10
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       Probably (Run as root to verify)
Snapshots:               Snapper
Failed units:

Please use search function first.


@SGS, where are the results? The first one on the search list is mine one.

It was just a reminder to always search before posting.
Tip: sort by date is often a good choice.


I want to be served breakfast in bed by a bevy of bodacious belly dancers every morning.

But as the Stones are renowned for saying, you can't always get what you want:



I have the same problem here.

Can't you just please give the answer to that issue? I've search and haven't found anything that help.

The answer is in the topic linked above, marked as solution: it is a bug, known by the developer of that widget, so it will be fixed.
When, we don't know, and we shouldn't "push", since it is nothing "blocking" and there are already even too many duplicated issues there for this stuff...


You obviously havent


You did link the search results, not to a particular topic. But thank you for the answer.

@ vinay007 you can keep your snarky answer to yourself, thank you.

No, I linked also the thread, already existing (to remind that we should search before posting), discussing the issue. And there, you can find the link. We shouldn't repeat information on duplicated topics.

1 Like

oops, sorry my bad I thought it was just a quote from the precedent message. I'm not used to that kind of forum layout.

1 Like

Repeating that you need to search before posting is not snark. Our forums policy is that users need to search thoroughly before asking for help. Perhaps you need to brush up on your search skills.


seriously, getting served breakfast in that way everyday really does become a tad tiring, and indeed rather distracting when spreading fine cut marmalade on a slice of toast - oh the crumbs get everywhere.


This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.