hello i need help for fix this
Onfig file /etc/pacman.conf, line 92: directive ‘[blackarch] Include’ in section ‘chaotic-aur’ not recognized. warning: config file /etc/pacman.conf, line 93: directive ‘[ultimate] SigLevel’ in section ‘chaotic-aur’ not recognized
Read again the topic template, edit your post and will be reopened.
Looks like bad copy/paste to me.
Here, start over: https://gitlab.com/garuda-linux/tools/garuda-tools/-/raw/master/data/pacman-default.conf
Each repository entry should look like this:
[garuda]
Include = /etc/pacman.d/chaotic-mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
[chaotic-aur]
Include = /etc/pacman.d/chaotic-mirrorlist
The bracketed line and the "Include =" line have to be set correctly or it won't work. In your error message I can see you have added extra repositories on the wrong lines.
In the worst case,
update remote fix
warning: config file /etc/pacman.conf, line 89: directive '[blackarch] Include' in section 'chaotic-aur' not r
ecognized.
warning: config file /etc/pacman.conf, line 90: directive '[ultimate] SigLevel' in section 'chaotic-aur' not r
ecognized.
i want to fix this problem but two of my repository did'n reconized by garuda
It won't help you if you post new inquiries here about the same problem without following the forum's guidelines.
As long as you do not post your garuda-inxi your posts will remain locked. You can add it to your first post.
System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=c2d83c18-57a6-4321-8e12-15c113eced47
rw rootflags=subvol=@ quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=b486f663-c018-4944-bba4-788ed355f740 loglevel=3 systemd.unified_cgroup_hierarchy=1
ibt=off
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux
base: Arch Linux
Machine:
Type: Laptop System: Acer product: Nitro AN515-45 v: V1.10 serial: <superuser required>
Mobo: CZ model: Scala_CAS v: V1.10 serial: <superuser required> UEFI: Insyde v: 1.10
date: 08/02/2022
Battery:
ID-1: BAT1 charge: 42.8 Wh (83.9%) condition: 51.0/58.8 Wh (86.8%) volts: 15.7 min: 15.4
model: SMP AP18E7M type: Li-ion serial: <filter> status: discharging
CPU:
Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 gen: 4
level: v3 note: check built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80)
stepping: 0 microcode: 0xA50000C
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 2330 high: 3200 min/max: 1200/4462 boost: enabled scaling:
driver: acpi-cpufreq governor: performance cores: 1: 3200 2: 1468 3: 1397 4: 3200 5: 3200 6: 3200
7: 1457 8: 1392 9: 3200 10: 1504 11: 1397 12: 3200 13: 1612 14: 1466 15: 3200 16: 3200
bogomips: 102216
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: Acer Incorporated ALI
driver: nouveau v: kernel non-free: 530.xx+ status: current (as of 2023-03) arch: Ampere
code: GAxxx process: TSMC n7 (7nm) built: 2020-22 pcie: speed: Unknown lanes: 63 link-max:
gen: 6 speed: 64 GT/s ports: active: none empty: HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:2520
class-ID: 0300
Device-2: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series] vendor: Acer Incorporated ALI
driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: none
bus-ID: 05:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 43.0 C
Device-3: Quanta HD User Facing type: USB driver: uvcvideo bus-ID: 3-3:2 chip-ID: 0408:a061
class-ID: 0e02
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1 compositor: kwin_x11 driver: X:
loaded: amdgpu,modesetting,nouveau alternate: fbdev,nv,vesa dri: radeonsi,nouveau gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1521 built: 2020 res: 1920x1080 hz: 144
dpi: 142 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: OpenGL v: 4.6 Mesa 23.0.3 renderer: AMD Radeon Graphics (renoir LLVM 15.0.7 DRM 3.49
6.2.13-zen-1-zen) direct-render: Yes
Audio:
Device-1: NVIDIA GA106 High Definition Audio vendor: Acer Incorporated ALI driver: snd_hda_intel
v: kernel pcie: speed: Unknown lanes: 63 link-max: gen: 6 speed: 64 GT/s bus-ID: 01:00.1
chip-ID: 10de:228e class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Acer Incorporated ALI driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci,
snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3
speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.5 chip-ID: 1022:15e2
class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Acer Incorporated ALI driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.6
chip-ID: 1022:15e3 class-ID: 0403
API: ALSA
v: k6.2.13-zen-1-zen status: kernel-api with: aoss type: oss-emulator tools: N/A
Server-1: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek vendor: Acer Incorporated ALI driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 03:00.0 chip-ID: 10ec:2600 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter vendor: Lite-On
driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 14c3:7961
class-ID: 0280
IF: wlp4s0 state: up mac: <filter>
Bluetooth:
Device-1: Lite-On Wireless_Device type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 04ca:3802
class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 2 state: up address: <filter>
Drives:
Local Storage: total: 1.38 TiB used: 11.77 GiB (0.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLQ512HBLU-00B00 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: FXM7201Q temp: 43.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWL110 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 0A
scheme: GPT
Partition:
ID-1: / raw-size: 442.86 GiB size: 442.86 GiB (100.00%) used: 11.77 GiB (2.7%) fs: btrfs
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 576 KiB (0.2%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 442.86 GiB size: 442.86 GiB (100.00%) used: 11.77 GiB (2.7%) fs: btrfs
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 442.86 GiB size: 442.86 GiB (100.00%) used: 11.77 GiB (2.7%) fs: btrfs
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 442.86 GiB size: 442.86 GiB (100.00%) used: 11.77 GiB (2.7%) fs: btrfs
dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 33.78 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:3
ID-2: swap-2 type: zram size: 30.71 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 60.5 C mobo: N/A gpu: amdgpu temp: 46.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 351 Uptime: 1h 14m wakeups: 1 Memory: 30.71 GiB used: 3.47 GiB (11.3%) Init: systemd
v: 253 default: graphical tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 2142
libs: 523 tools: gnome-software,octopi,pamac,paru,yay pm: flatpak pkgs: 0 Client: shell wrapper
v: 5.1.16-release inxi: 3.3.26
Garuda (2.6.16-1):
System install date: 2023-06-05
Last full system update: 2023-06-05 ↻
Is partially upgraded: Yes
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units:
FROM WHAT I SHARE ABOVE :
i have already install garuda linux dragonized raptor latest version but when i try to update my system it cannot update because it have already newest version from garuda repository .
i can update whole system it seem it have package conflict with other .
how i can solve this .i need solution
Welcome to the forum @puterait2020
System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=c2d83c18-57a6-4321-8e12-15c113eced47
rw rootflags=subvol=@ quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=b486f663-c018-4944-bba4-788ed355f740 loglevel=3 systemd.unified_cgroup_hierarchy=1
ibt=off
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux
base: Arch Linux
Please provide details regarding what issue you are facing while updating. What packages are in conflict? Please post the terminal text you get when updating the system to help us understand what might be happening.
Search the forum for your issue first. Is the conflict between mangohud and mangohud-common? it’s been already reported on the forum and solution is
garuda-update -- --ignore mangohud
you can look here
Today’s last version may be tomorrow’s second to last, so it would be important to simply share the ISO name, which includes the date.
Seems like he didn’t like any of the solutions he got so far.
Edit:
BTW.
You should better follow the instructions instead of constantly posting new posts with old problem.
oh. I thought he was a newbie looking at his post. 
. So he is just someone who doesn't follow any guidelines given to him. Such members are quite disappointing.
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
Please be kind, re…reboot.
Garuda Linux dragonized have five default repository .I know mixing stable and unstable can make you system trouble .
I want an opinion from my friend what unofficial arch repository can make up for another software that unavailable through arch repository .
I have seen many repository unofficial at arch wiki and make me trouble to choose and didnt` know what to add .
Now I want an opinion from my friend ?
Arch User Repository - ArchWiki ? I think the paru helper is already installed by default on all editions.
I don't know of the other unofficial binary repositories, to this day I haven't had a need for any of those.
If you have a specific software in mind... I can't read your mind.
Please please please, try not be vague in your questions, or the best you'll get will be some snarky RTFM (and we are nice, believe me).
https://forum.garudalinux.org/t/unofficial-archlinux-repository/29051
Please stop opening new topics on the same subject over and over again.
Just use the default Garuda configurations and you won’t have any problems.
If you make changes that cause problems, you should be able to fix them yourself.
Yes, but two of those come from the same sources and built from either the AUR or Garuda official packages, so
Is not as likely as some will make you believe.
That would be chaotic-aur.
