I will first start with this…
╭─fenris@fenris in ~ took 12ms
╰─λ sudo garuda-inxi
[sudo] password for fenris:
System:
Kernel: 6.8.6-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=cd6e149b-2970-476f-b742-e3dc1120bedc rw rootflags=subvol=@
quiet rd.luks.uuid=264cadad-c8c3-46fe-b132-32f30ff8b69c
rd.luks.uuid=0dd705d1-74f7-4ae7-8f55-96ae57f524b8
resume=/dev/mapper/luks-0dd705d1-74f7-4ae7-8f55-96ae57f524b8 loglevel=3
ibt=off
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 wm: xfwm4 v: 4.18.0
with: xfce4-panel tools: xfce4-screensaver avail: xautolock dm: LightDM
v: 1.32.0 Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: AZW model: MINI S v: 10 serial: N/A part-nu: 01
uuid: 03000200-0400-0500-0006-000700080009 UEFI: American Megatrends LLC.
v: ADLNV104 date: 02/06/2023
CPU:
Info: model: Intel N100 socket: U3E1 bits: 64 type: MCP arch: Alder Lake
level: v3 note: check built: 2021+ process: Intel 7 (10nm ESF) family: 6
model-id: 0xBE (190) stepping: 0 microcode: 0x15
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 384 KiB
desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 1x2 MiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 957 high: 1000 min/max: 700/3400 base/boost: 2871/3400
scaling: driver: intel_pstate governor: powersave volts: 1.0 V
ext-clock: 100 MHz cores: 1: 908 2: 996 3: 925 4: 1000 bogomips: 6451
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Alder Lake-N [UHD Graphics] driver: i915 v: kernel
alternate: xe arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports:
active: HDMI-A-1,HDMI-A-2 empty: none bus-ID: 00:02.0 chip-ID: 8086:46d1
class-ID: 0300
Device-2: Creative Live! Cam Sync 1080p V2 driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4.3:8
chip-ID: 041e:40a0 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.13 compositor: xfwm4 v: 4.18.0 driver:
X: loaded: modesetting alternate: fbdev,intel,vesa dri: iris gpu: i915
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3280x1080 s-dpi: 96 s-size: 868x286mm (34.17x11.26")
s-diag: 914mm (35.98")
Monitor-1: HDMI-A-1 mapped: HDMI-1 pos: left model: HKC TV
serial: <filter> built: 2015 res: 1360x768 hz: 60 dpi: 45 gamma: 1.2
size: 760x450mm (29.92x17.72") diag: 806mm (31.7") ratio: 16:9, 15:9
modes: max: 1360x768 min: 720x400
Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: primary,right model: HP LA2206
serial: <filter> built: 2011 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
size: 477x268mm (18.78x10.55") diag: 547mm (21.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: Vulkan v: 1.3.279 layers: 5 device: 0 type: integrated-gpu
name: Intel Graphics (ADL-N) driver: mesa intel v: 24.0.5-arch1.1
device-ID: 8086:46d1 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
(LLVM 17.0.6 256 bits) driver: mesa llvmpipe v: 24.0.5-arch1.1 (LLVM
17.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
Device-1: Intel Alder Lake-N PCH High Definition Audio driver: snd_hda_intel
v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3
chip-ID: 8086:54c8 class-ID: 0403
Device-2: C-Media CM106 Like Sound Device
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-4.2:6 chip-ID: 0d8c:0102 class-ID: 0300
Device-3: Creative Live! Cam Sync 1080p V2 driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4.3:8
chip-ID: 041e:40a0 class-ID: 0102 serial: <filter>
Device-4: JMTek LLC. LCS USB Audio
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-4.4:9 chip-ID: 0c76:2018 class-ID: 0300
serial: <filter>
API: ALSA v: k6.8.6-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.0.5 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel CNVi: Wi-Fi driver: iwlwifi v: kernel bus-ID: 00:14.3
chip-ID: 8086:54f0 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000
bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: ASIX AX88179 Gigabit Ethernet driver: ax88179_178a type: USB
rev: 3.0 speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-4.1:4
chip-ID: 0b95:1790 class-ID: ff00 serial: <filter>
IF: enp0s20f0u4u1 state: down mac: <filter>
IF-ID-1: tun0 state: unknown speed: 10000 Mbps duplex: full mac: N/A
IF-ID-2: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-3: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10:5 chip-ID: 8087:0026
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
status: discoverable: no pairing: no
Drives:
Local Storage: total: 2.73 TiB used: 1.05 TiB (38.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 990 PRO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7 temp: 53.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LM015-2E8174
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
used: 31.45 GiB (3.4%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 728 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:1
ID-3: /home raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
used: 31.45 GiB (3.4%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
ID-4: /var/log raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
used: 31.45 GiB (3.4%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
ID-5: /var/tmp raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
used: 31.45 GiB (3.4%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 16.94 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/dm-1 maj-min: 254:1
mapped: luks-0dd705d1-74f7-4ae7-8f55-96ae57f524b8
ID-2: swap-2 type: zram size: 15.4 GiB used: 5.88 GiB (38.2%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 59.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB available: 15.4 GiB used: 12.58 GiB (81.7%)
igpu: 60 MiB
Processes: 369 Power: uptime: 10h 26m states: freeze,mem,disk
suspend: deep avail: s2idle wakeups: 0 hibernate: platform avail: shutdown,
reboot, suspend, test_resume image: 6.14 GiB
services: upowerd,xfce4-power-manager Init: systemd v: 255
default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1726 libs: 465 tools: pamac,paru Compilers:
clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi (sudo) default: Bash v: 5.2.26
running-in: xfce4-terminal inxi: 3.3.34
Garuda (2.6.26-1):
System install date: 2024-04-11
Last full system update: 2024-04-18 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units: vmware-workstation-server.service vmware.service
╭─fenris@fenris in ~ as 🧙 took 6s
╰─λ
So my issue is, my updates keep failing cause Blackarch for some whatever reason can’t connect to the server properly. I get this…
╭─fenris@fenris in /mnt/veracrypt1/Videos as 🧙 took 1m12s
[🔴] × garuda-update -a
:: Synchronizing package databases...
garuda is up to date
core is up to date
extra is up to date
multilib is up to date
chaotic-aur is up to date
blackarch.db failed to download
error: failed retrieving file 'blackarch.db' from ftp.halifax.rwth-aachen.de : SSL connection timeout
error: failed to synchronize all databases (download library error)
:: Synchronizing package databases...
chaotic-aur.db failed to download
error: failed retrieving file 'chaotic-aur.db' from garudalinux.org : Resolving timed out after 10002 milliseconds
error: failed to synchronize all databases (download library error)
--> Refreshing mirrorlists using rate-mirrors, please be patient..🍵
:: Synchronizing package databases...
garuda downloading...
core downloading...
extra downloading...
multilib downloading...
chaotic-aur downloading...
blackarch downloading...
error: failed retrieving file 'blackarch.db' from ftp.halifax.rwth-aachen.de : SSL connection timeout
error: failed to synchronize all databases (download library error)
:: Synchronizing package databases...
chaotic-aur downloading...
spawn pacman -Su -yy
:: Synchronizing package databases...
garuda 72.4 KiB 13.2 KiB/s 00:05 [----------------------] 100%
core 127.5 KiB 16.1 KiB/s 00:08 [----------------------] 100%
extra 8.1 MiB 777 KiB/s 00:11 [----------------------] 100%
multilib 139.1 KiB 20.5 KiB/s 00:07 [----------------------] 100%
chaotic-aur 2.0 MiB 155 KiB/s 00:13 [----------------------] 100%
blackarch.db failed to download
error: failed retrieving file 'blackarch.db' from ftp.halifax.rwth-aachen.de : SSL connection timeout
error: failed to synchronize all databases (download library error)
╭─fenris@fenris in /mnt/veracrypt1/Videos as 🧙 took 2m46s
[🔴] ×
I then tried to do a garuda-update -a --skip-mirrorlist and I still get this…
╭─fenris@fenris in /mnt/veracrypt1/Videos took 5s
[🔴] × garuda-update -a --skip-mirrorlist
[sudo] password for fenris:
:: Synchronizing package databases...
garuda is up to date
core 127.5 KiB 29.1 KiB/s 00:04 [----------------------] 100%
extra 8.1 MiB 868 KiB/s 00:10 [----------------------] 100%
multilib 139.1 KiB 40.4 KiB/s 00:03 [----------------------] 100%
chaotic-aur 2.0 MiB 94.4 KiB/s 00:22 [----------------------] 100%
blackarch.db failed to download
error: failed retrieving file 'blackarch.db' from ftp.halifax.rwth-aachen.de : SSL connection timeout
error: failed to synchronize all databases (unexpected error)
:: Synchronizing package databases...
chaotic-aur 2.0 MiB 226 KiB/s 00:09 [######################] 100%
:: Synchronizing package databases...
garuda downloading...
core downloading...
extra downloading...
multilib downloading...
chaotic-aur downloading...
blackarch downloading...
error: failed retrieving file 'blackarch.db' from ftp.halifax.rwth-aachen.de : SSL connection timeout
error: failed to synchronize all databases (download library error)
:: Synchronizing package databases...
chaotic-aur downloading...
spawn pacman -Su -y
:: Synchronizing package databases...
garuda is up to date
core is up to date
extra is up to date
multilib is up to date
chaotic-aur 2.0 MiB 212 KiB/s 00:10 [----------------------] 100%
blackarch.db failed to download
error: failed retrieving file 'blackarch.db' from ftp.halifax.rwth-aachen.de : SSL connection timeout
error: failed to synchronize all databases (download library error)
Any ideas how to fix this?
