Another live start usb.... stuck at "livemedia keyring setup", froze at "reached target graphical Interface"

[Blazzycrafter]

Hey…
its an start problem (I cant star the system…)

i used the live version

after tying the nvdia driver version an being stuck at

[ok] finished livemedia keyring setup

(there i CAN use the virtual consoles…)
i tried it with open source drivers…
got stuck and freeze at

~reached target graphical Interface~

to start i use Ventoy
with normal mode (i even tried Grub2)

i want install the KDE Dr460nized gaming version
and that was my last test after i get back to my win 11…

i got it running 1 times in KDE Dr460nized version… (with nvdiadrivers and long wait time (about 20- minutes…))

because cant start any program currently and have not to “copy” anything…

IMAGE OF garuda-inxi after edit or in comments

Gpu is rtx3070

i found an iso that its maybe too outdated (so i dont tested it)

Stuck on “Reached Target Graphical Interface” in Live Environment

AMD Ryzen 5 5600X 3.70 GHz B450 Tomahawk 16GB RAM @ 3200 NVIDIA GeForce RTX 4070 Ti I tried to get the output from the 'garuda-inxi' command, but I couldn't figure out how to output it to a file on the Live USB I was using. If someone can give me some guidance there, I will happily provide it. Relatively new to Garuda Linux, managed to get it installed fine with the GNOME variant on my laptop, but having some trouble getting any variant installed on my desktop. I am trying to mostly install…

thanks for reading…

[SGS]

@Blazzycrafter

i want install the KDE Dr460nized gaming version

Use “normal” KDE and install games with garuda-gamer.
Please search forum about.

[Blazzycrafter]

Yes thats helpes....
another error....
after i installed the distro....
grub failed to create an bootloader...

Der Bootloader konnte nicht installiert werden. Der Installationsbefehl <pre>grub-install --target=i386-pc --recheck --force /dev/sdb</pre> erzeugte Fehlercode 1.

if i call that command with sudo.... i get this:

╭─garuda@garuda in ~ as 🧙 took 18ms
[🔴] × sudo grub-install --install=i386-pc --recheck --force /dev/sdb
Installing for i386-pc platform.
grub-install: error: cannot open `/usr/lib/grub/i386-pc/i386-pc.mod': No such file or directory.

idea?

[SGS]

Why do you want to change the grub directory?

sudo grub-install
x86_64-efi wird für Ihre Plattform installiert.
installation beendet. Keine Fehler aufgetreten.

 ╭─sgs@pro in ~ as 🧙 took 1s
 🕙 20:32:03
 ╰─λ sudo update-grub
Generating grub configuration file ...
Found theme: /usr/share/grub/themes/garuda/theme.txt
Found linux image: /boot/vmlinuz-linux-amd-znver3
Found initrd image: /boot/amd-ucode.img /boot/initramfs-linux-amd-znver3.img
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
Found Windows Boot Manager on /dev/nvme0n1p1@/EFI/Microsoft/Boot/bootmgfw.efi
Found Garuda Linux on /dev/nvme0n1p6
Found Garuda Linux on /dev/nvme0n1p7
Adding boot menu entry for UEFI Firmware Settings ...
Detecting snapshots ...
Found snapshot: 2023-08-23 17:53:44 | @/.snapshots/692/snapshot | post | re2                                                              |
Found snapshot: 2023-08-23 17:53:44 | @/.snapshots/691/snapshot | pre  | pacman -Rns re2                                                  |
Found snapshot: 2023-08-23 17:49:02 | @/.snapshots/690/snapshot | post | libdrm libixion liborcus libreoffice-fresh libreoffice-fresh-de  |
Found snapshot: 2023-08-23 17:48:58 | @/.snapshots/689/snapshot | pre  | pacman -Su                                                       |
Found snapshot: 2023-08-23 10:07:15 | @/.snapshots/688/snapshot | post | git                                                              |
Found snapshot: 2023-08-23 10:07:14 | @/.snapshots/687/snapshot | pre  | pacman -Su                                                       |
Found snapshot: 2023-08-23 01:42:49 | @/.snapshots/686/snapshot | post | fastfetch fwupd nextcloud-client telegram-desktop xfce4-terminal |
Found snapshot: 2023-08-23 01:42:46 | @/.snapshots/685/snapshot | pre  | pacman -Su                                                       |
Found snapshot: 2023-08-22 11:42:18 | @/.snapshots/684/snapshot | post | libupnp signal-desktop                                           |
Found snapshot: 2023-08-22 11:42:16 | @/.snapshots/683/snapshot | pre  | pacman -Su                                                       |
Found snapshot: 2023-08-22 08:05:20 | @/.snapshots/682/snapshot | post | fastfetch iana-etc imlib2 librewolf luajit whoogle-git           |
Found snapshot: 2023-08-22 08:05:18 | @/.snapshots/681/snapshot | pre  | pacman -Su                                                       |
Found snapshot: 2023-08-21 09:43:58 | @/.snapshots/680/snapshot | post | gallery-dl                                                       |
Found snapshot: 2023-08-21 09:43:58 | @/.snapshots/679/snapshot | pre  | pacman -S chaotic-aur/gallery-dl                                 |
Found 14 snapshot(s)
Unmount /tmp/grub-btrfs.Io45NdxLYB .. Success
Found memtest86+ image: /boot/memtest86+/memtest.bin
/usr/bin/grub-probe: Warnung: Unbekannter Gerätetyp nvme0n1.
done

Post garuda-inxi and lsblk or lsblk -f

[Blazzycrafter]

The same commands like you typed:

╭─garuda@garuda in ~ as 🧙 took 4ms
╰─λ sudo grub-install
Installing for i386-pc platform.
grub-install: error: install device isn't specified.

╭─garuda@garuda in ~ as 🧙 took 62ms
[🔴] × sudo update-grub
/usr/bin/grub-probe: error: failed to get canonical path of `overlay'.

garuda-inxi

garuda-inxi
System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=garuda root=miso:LABEL=GARUDA_DR460NIZED_RAPTOR quiet
systemd.show_status=1 ibt=off driver=nonfree nouveau.modeset=0
i915.modeset=1 radeon.modeset=1
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: H110M-DGS R3.0
serial: <superuser required> UEFI-[Legacy]: American Megatrends v: P7.30
date: 01/17/2018
CPU:
Info: model: Intel Core i7-7700K bits: 64 type: MT MCP arch: Kaby Lake
gen: core 7 level: v3 note: check built: 2018 process: Intel 14nm family: 6
model-id: 0x9E (158) stepping: 9 microcode: 0xF0
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1225 high: 4200 min/max: 800/4500 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800
5: 800 6: 4200 7: 800 8: 800 bogomips: 67200
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3070 Lite Hash Rate]
vendor: Palit Microsystems driver: nvidia v: 530.41.03
alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-03) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 3 speed: 8 GT/s lanes: 4
link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.0
chip-ID: 10de:2488 class-ID: 0300
Device-2: Z-Star Micro Saturn USB 2.0 Camera. type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-2:3 chip-ID: 0ac8:0332
class-ID: 0102
Device-3: KYE Systems (Mouse Systems) PC-LM1E Camera type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-9:6 chip-ID: 0458:6006
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 95 s-size: 1027x292mm (40.43x11.50")
s-diag: 1068mm (42.04")
Monitor-1: DP-1 pos: right res: 1920x1080 hz: 60 dpi: 40
size: 1210x680mm (47.64x26.77") diag: 1388mm (54.65") modes: N/A
Monitor-2: HDMI-0 pos: primary,left res: 1920x1080 hz: 60 dpi: 96
size: 509x286mm (20.04x11.26") diag: 584mm (22.99") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 530.41.03 renderer: NVIDIA GeForce RTX
3070/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: ASRock
driver: snd_hda_intel v: kernel bus-ID: 1-2:3 chip-ID: 0ac8:0332
alternate: snd_soc_avs bus-ID: 00:1f.3 class-ID: 0102 chip-ID: 8086:a170
class-ID: 0403
Device-2: NVIDIA GA104 High Definition Audio vendor: Palit Microsystems
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 4
link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:228b class-ID: 0403
Device-3: Z-Star Micro Saturn USB 2.0 Camera. type: USB
driver: snd-usb-audio,uvcvideo
Device-4: KYE Systems (Mouse Systems) PC-LM1E Camera type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-9:6 chip-ID: 0458:6006
class-ID: 0102 serial: <filter>
API: ALSA v: k6.2.13-zen-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASRock driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 5.95 TiB used: 5.03 GiB (0.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Corsair model: Force LE SSD
size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 12.2 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Intenso model: SSD size: 953.87 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD
serial: <filter> rev: 7A0 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 QVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 1B6Q scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST4000DM004-2CV104
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5425 serial: <filter> rev: 0001 scheme: GPT
ID-5: /dev/sde maj-min: 8:64 type: USB vendor: SanDisk model: Cruzer
size: 29.82 GiB block-size: physical: 512 B logical: 512 B type: N/A
serial: <filter> rev: 1.20 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 39.13 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 49.0 C pch: 52.0 C mobo: N/A gpu: nvidia
temp: 47 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
Processes: 239 Uptime: 49m wakeups: 2 Memory: 39.13 GiB
used: 5.97 GiB (15.3%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1223
libs: 322 tools: octopi,paru Shell: fish v: 3.6.1 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.26
warning: database file for 'garuda' does not exist (use '-Sy' to download)
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'community' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
warning: database file for 'chaotic-aur' does not exist (use '-Sy' to download)
Garuda (2.6.16-1):
System install date:     2023-08-23
Last full system update: 2023-08-23 ↻
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       <superuser required>
Failed units:            snapper-cleanup.service

lsblk -f

NAME FSTYPE FSVER LABEL        UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
loop0
squash 4.0                                                           0   100% /run/miso/sfs/livefs
loop1
squash 4.0                                                           0   100% /run/miso/sfs/mhwdfs
loop2
squash 4.0                                                           0   100% /run/miso/sfs/desktopfs
loop3
squash 4.0                                                           0   100% /run/miso/sfs/rootfs
sda
├─sda1
│    vfat   FAT32              0200-6163
├─sda2
│
├─sda3
│    ntfs                      F0F80CA7F80C6E62
└─sda4
ntfs                      E8AC7379AC73415C
sdb
├─sdb1
│
├─sdb2
│    ntfs         F            3EB251E2B2519EE9
└─sdb3
btrfs                     13f83020-1f39-43b2-b320-6e8a9539cace  548.3G     1% /tmp/calamares-root-qfnbnqcc/var/tmp
/tmp/calamares-root-qfnbnqcc/var/log
/tmp/calamares-root-qfnbnqcc/var/cache
/tmp/calamares-root-qfnbnqcc/srv
/tmp/calamares-root-qfnbnqcc/root
/tmp/calamares-root-qfnbnqcc/home
/tmp/calamares-root-qfnbnqc
c
sdc
├─sdc1
│    ntfs         Quick Games  0B7C13470B7C1347
└─sdc2
ntfs         SymLinkHub   DE42A9D842A9B625
sdd
└─sdd1
ntfs                      B4A2563CA25602F2
sde
├─sde1
│    exfat  1.0   Ventoy       4E21-0000
│ └─ventoy
│    iso966 Jolie GARUDA_DR460NIZED_RAPTOR
│                              2023-05-01-21-27-23-00                     0   100% /run/miso/bootmnt
└─sde2

zram0
[SWAP]

[SGS]

@SGS

Why do you want to change the grub directory?

``

Please

[Blazzycrafter]

oh i forgot to answer…
XD
sry here:

@SGS

Why do you want to change the grub directory?

because i tried the default and it did not work too…
i think its the same problem…

Mal eine kleine frage bei seite...

Ist es ok hier auch auf deutsch zu schreiben?
kann nur gebrochenes deutsch “denglisch” XD
(also englisch kann ich… ich tue mich aber schewer damit XD)

[SGS]

There is a language page

Deutsch

[Blazzycrafter]

should we continue here?
r move this theard there?

[BluishHumility]

@Blazzycrafter

UEFI-[Legacy]

You have a UEFI board but you are booted in legacy mode. Try booting to the live environment in UEFI mode, then you should be able to complete the installation.

Are you using manual partitioning, or something else?