Seit März 23 habe ich Garuda installiert. Bis vor ein paar Wochen konnte ich mit dem ZEN-Kernel booten und den PC in den Bereitschaftsmodus versetzen und problemlos wieder aufwecken. Mittlerweile springen beim aufwecken nach mehr als 10 Minuten nur noch die Lüfter an. Der Bildschirm bleibt schwarz und weder die Maus noch die Festplatten LED leuchtet.
Daher habe ich den xanmod und den Linux-binder Kernel (für waydroid) installiert.
Mit diesen beiden gibt es das o.g. Problem nicht. Scheint also am Zen-Kernel zu liegen.
[schulze@schulze-b450ms2h ~]$ garuda-inxi
System:
Kernel: 6.4.12-arch1-1-binder arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: hpet available: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-binder
root=UUID=9197446f-8417-4732-984f-a7a34cb92ad6 rw rootflags=subvol=@
nvidia-drm.modeset=1 nosplash ibt=off
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.10 wm: kwin_x11 vt: 2 dm:
1: GDM v: 44.1 note: stopped 2: LightDM v: 1.32.0 note: stopped 3: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B450M S2H serial: <superuser required>
BIOS: American Megatrends LLC. v: F63b date: 05/11/2022
CPU:
Info: model: AMD Ryzen 5 4500 bits: 64 type: MT MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x60 (96) stepping: 1 microcode: 0x8600106
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB
desc: 2x4 MiB
Speed (MHz): avg: 2039 high: 3600 min/max: 1400/4208 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3213 2: 1400
3: 3600 4: 1400 5: 1400 6: 1400 7: 3135 8: 1400 9: 2761 10: 1400 11: 1400
12: 1961 bogomips: 86268
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA TU117 [GeForce GTX 1650] driver: nvidia v: 535.104.05
alternate: nouveau,nvidia_drm non-free: 535.xx+
status: current (as of 2023-08) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-22 pcie: gen: 2 speed: 5 GT/s lanes: 16
link-max: gen: 3 speed: 8 GT/s ports: active: none off: DP-1
empty: DP-2,HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:1f82 class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.2.0
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia,nvidia-nvswitch
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1680x1050 s-dpi: 90 s-size: 474x303mm (18.66x11.93")
s-diag: 563mm (22.15")
Monitor-1: DP-1 mapped: DP-0 note: disabled model: Acer B226WL
serial: <filter> built: 2017 res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2
size: 474x296mm (18.66x11.65") diag: 559mm (22") ratio: 16:10 modes:
max: 1680x1050 min: 640x480
API: OpenGL v: 4.6.0 NVIDIA 535.104.05 renderer: NVIDIA GeForce GTX
1650/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: NVIDIA driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10fa class-ID: 0403
Device-2: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 0a:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-3: AMD Family 17h/19h HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 0a:00.6 chip-ID: 1022:15e3
class-ID: 0403
Device-4: Plantronics Plantronics Blackwire 3225 Series
driver: plantronics,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-6:3 chip-ID: 047f:c058 class-ID: 0300
serial: <filter>
API: ALSA v: k6.4.12-arch1-1-binder status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.79 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 09:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp9s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Drives:
Local Storage: total: 5.04 TiB used: 4.16 TiB (82.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 480GB
size: 447.14 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 00RL scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD10EZEX-00WN4A0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 7200 serial: <filter>
fw-rev: 1A01 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: SanDisk model: SSD PLUS 1000GB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 04RL scheme: MBR
ID-4: /dev/sdd maj-min: 8:48 vendor: SanDisk model: SDSSDA-1T00
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 40RL
ID-5: /dev/sde maj-min: 8:64 vendor: Western Digital
model: WD20SDRW-34VUUS1 size: 1.82 TiB block-size: physical: 512 B
logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
tech: HDD rpm: 5400 serial: <filter> fw-rev: 1023 scheme: GPT
ID-6: /dev/sdf maj-min: 8:80 vendor: SMI (STMicroelectronics)
model: USB DISK size: 58.59 GiB block-size: physical: 512 B logical: 512 B
type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A
serial: <filter> fw-rev: 1100
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 430.1 GiB size: 430.1 GiB (100.00%)
used: 369.22 GiB (85.8%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 430.1 GiB size: 430.1 GiB (100.00%)
used: 369.22 GiB (85.8%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 430.1 GiB size: 430.1 GiB (100.00%)
used: 369.22 GiB (85.8%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 430.1 GiB size: 430.1 GiB (100.00%)
used: 369.22 GiB (85.8%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.49 GiB used: 60 MiB (0.4%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
ID-2: swap-2 type: partition size: 17.03 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda2 maj-min: 8:2
Sensors:
System Temperatures: cpu: 31.1 C mobo: N/A gpu: nvidia temp: 31 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 20%
Info:
Processes: 389 Uptime: 1h 47m wakeups: 0 Memory: total: 16 GiB
available: 15.49 GiB used: 6.09 GiB (39.3%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 alt: 12
clang: 16.0.6 Packages: 2233 pm: pacman pkgs: 2132 libs: 504
tools: gnome-software,octopi,pamac,paru pm: flatpak pkgs: 101 Shell: Bash
v: 5.1.16 running-in: konsole inxi: 3.3.29
Garuda (2.6.16-1):
System install date: 2023-09-10
Last full system update: 2023-09-14 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager mkinitcpio nvidia-dkms
Windows dual boot: <superuser required>
Failed units:
for that issue i have to permanently switched to LTS