Xfce - Garuda Boot Options from Xfce start menu

System:
  Kernel: 6.0.10-arch2-1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux
    root=UUID=19ea50e6-51dc-4589-8c75-5a1fa7b04a44 rw [email protected]
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3
  Desktop: Xfce v: 4.16.1 tk: Gtk v: 3.24.34 info: xfce4-panel wm: xfwm
    v: 4.16.1 vt: 7 dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Kvm System: QEMU product: Standard PC (Q35 + ICH9, 2009) v: pc-q35-7.1
    serial: <superuser required> Chassis: type: 1 v: pc-q35-7.1
    serial: <superuser required>
  Mobo: N/A model: N/A serial: N/A UEFI: EFI Development Kit II / OVMF
    v: 0.0.0 date: 02/06/2015
CPU:
  Info: model: 11th Gen Intel Core i7-1165G7 bits: 64 type: SMP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xA6
  Topology: cpus: 4x cores: 1 smt: <unsupported> cache:
    L1: 4x 64 KiB (256 KiB) desc: d-1x32 KiB; i-1x32 KiB L2: 4x 4 MiB (16 MiB)
    desc: 1x4 MiB L3: 4x 16 MiB (64 MiB) desc: 1x16 MiB
  Speed (MHz): avg: 2803 min/max: N/A cores: 1: 2803 2: 2803 3: 2803 4: 2803
    bogomips: 22432
  Flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Red Hat Virtio GPU driver: virtio-pci v: 1 alternate: virtio_pci
    bus-ID: 00:01.0 chip-ID: 1af4:1050 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.4 compositor: xfwm v: 4.16.1 driver: X:
    loaded: modesetting alternate: fbdev,vesa gpu: virtio_gpu display-ID: :0.0
    screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26")
    s-diag: 583mm (22.95")
  Monitor-1: Virtual-1 model: QEMU Monitor built: 2014 res: 1920x1080 hz: 60
    dpi: 150 gamma: 1.2 size: 325x203mm (12.8x7.99") diag: 383mm (15.1")
    ratio: 16:10 modes: max: 1280x800 min: 640x480
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
    missing.
Audio:
  Device-1: Intel 82801I HD Audio vendor: Red Hat QEMU Virtual Machine
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e
    class-ID: 0403
  Sound API: ALSA v: k6.0.10-arch2-1 running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.60 running: yes
Network:
  Device-1: Red Hat Virtio network driver: virtio-pci v: 1 modules: virtio_pci
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 01:00.0
    chip-ID: 1af4:1041 class-ID: 0200
  IF-ID-1: enp1s0 state: up speed: -1 duplex: unknown mac: <filter>
Drives:
  Local Storage: total: 50 GiB used: 7.92 GiB (15.8%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/vda maj-min: 254:0 model: N/A size: 50 GiB block-size:
    physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: N/A
    scheme: GPT
Partition:
  ID-1: / raw-size: 49.7 GiB size: 49.7 GiB (100.00%) used: 7.92 GiB (15.9%)
    fs: btrfs dev: /dev/vda2 maj-min: 254:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 608 KiB (0.2%) fs: vfat dev: /dev/vda1 maj-min: 254:1
  ID-3: /home raw-size: 49.7 GiB size: 49.7 GiB (100.00%)
    used: 7.92 GiB (15.9%) fs: btrfs dev: /dev/vda2 maj-min: 254:2
  ID-4: /var/log raw-size: 49.7 GiB size: 49.7 GiB (100.00%)
    used: 7.92 GiB (15.9%) fs: btrfs dev: /dev/vda2 maj-min: 254:2
  ID-5: /var/tmp raw-size: 49.7 GiB size: 49.7 GiB (100.00%)
    used: 7.92 GiB (15.9%) fs: btrfs dev: /dev/vda2 maj-min: 254:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 3.81 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon
    or lm-sensors.
Info:
  Processes: 218 Uptime: 20m wakeups: 410 Memory: 3.81 GiB
  used: 1.67 GiB (43.7%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 Packages: pm: pacman pkgs: 1187
  libs: 327 tools: pamac,paru,yay Shell: Bash v: 5.1.16
  running-in: xfce4-terminal inxi: 3.3.23
Garuda (2.6.9-1):
  System install date:     2022-11-27
  Last full system update: 2022-11-28
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       No/Undetected
  Snapshots:               Snapper
  Failed units:            

Xfce - Garuda Boot Options from Xfce start menu ask for password and closes. If I press edit on the icon and copy the command to the terminal it works as expected. If I select Garuda Welcome and select Garuda Boot Options it works as expected. I put this under Xfce as it is the only Garuda DM I have on here at this time.

2 Likes

Created a /bin/bash file and run it from the Garuda Boot Options from the Xfce start menu and it works as expected. Seems there is a polkit bug somewhere in the Xfce menu system.

pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY HOME=$HOME garuda-boot-options -style kvantum

Command above used in the /bin/bash file.

1 Like