Hey everyone,
Ive been having problems starting Cyberpunk since the new update on 12/18/2023. A window would pop up for a second and then close. I did some testing and it looks like the vulkan-pkgs are causing the problem. It works fine after a downgrade of the vulkan-pkgs. Maybe it works with other Windows Game issues too.
Just wanted to post this here in case anyone else is having the same issue.
I do update every morning, after today’s update all games stop launching from steam and heroic launchers
I did use snapper to roll back
I’ve got this as well and it is definitely related to the vulkan/mesa update. If you run vulcaninfo it instantly crashes with the following error:
'vulkaninfo' terminated by signal SIGSEGV (Address boundary error).
Games crash when they try to check the capabilities of your GPU. This is the error i pulled out of the lutris logs, steam had similar errors pointing to the same file.
Assertion failed: !status && "vkGetPhysicalDeviceSurfaceCapabilitiesKHR", file ../dlls/winevulkan/loader_thunks.c
I downgraded the vulkan packages and it worked again. Unfortunately i didn’t note much down during my attempts at fixing it yesterday as i was planning to properly dig into it during the weekend.
Garuda-inxi taken without the vulkan update:
garuda-inxi
System:
Kernel: 6.6.7-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=b61e7e49-a9d4-4024-ba41-38f8593584bb rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=3e5116bb-dee7-4386-99d8-27ae1b5bb3d2 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: ROG STRIX X570-F GAMING v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 4403
date: 04/27/2022
CPU:
Info: model: AMD Ryzen 9 5900X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 2 microcode: 0xA20120A
Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB desc: 12x512 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 3682 high: 3700 min/max: 2200/4950 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3596 2: 3700
3: 3700 4: 3700 5: 3700 6: 3700 7: 3700 8: 3700 9: 3700 10: 3700 11: 3700
12: 3700 13: 3700 14: 3700 15: 3700 16: 3700 17: 3592 18: 3700 19: 3584
20: 3600 21: 3700 22: 3700 23: 3700 24: 3700 bogomips: 177611
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 21 [Radeon RX 6800/6800 XT / 6900 XT]
vendor: XFX Speedster MERC 319 driver: amdgpu v: kernel arch: RDNA-2
code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4
speed: 16 GT/s lanes: 16 ports: active: DP-1,DP-3 empty: DP-2,HDMI-A-1
bus-ID: 0a:00.0 chip-ID: 1002:73bf class-ID: 0300
Display: x11 server: X.Org v: 21.1.10 with: Xwayland v: 23.2.3
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting,radeon
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1354x381mm (53.31x15.00")
s-diag: 1407mm (55.38")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: primary,right
model: Samsung LS27AG500N serial: <filter> built: 2021 res: 2560x1440
hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23")
diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 720x400
Monitor-2: DP-3 mapped: DisplayPort-2 pos: left model: Samsung LS27AG500N
serial: <filter> built: 2021 res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2
size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes:
max: 2560x1440 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.2.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 6800 XT (navi21 LLVM
16.0.6 DRM 3.54 6.6.7-zen1-1-zen) device-ID: 1002:73bf memory: 15.62 GiB
unified: no
API: Vulkan v: 1.3.269 layers: 11 device: 0 type: discrete-gpu name: AMD
Radeon RX 6800 XT (RADV NAVI21) driver: mesa radv v: 23.2.1-arch1.2
device-ID: 1002:73bf surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
(LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.2.1-arch1.2 (LLVM
16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0a:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0c:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: ASUSTek USB Audio driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-1:2
chip-ID: 0b05:1876 class-ID: 0300 serial: <filter>
API: ALSA v: k6.6.7-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0
chip-ID: 8086:1539 class-ID: 0200
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: ASUSTek ASUS USB-BT500 driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:2 chip-ID: 0b05:190e
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.1
lmp-v: 10 status: discoverable: no pairing: no class-ID: 7c0104
Drives:
Local Storage: total: 17.28 TiB used: 6.9 TiB (39.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 5B2QGXA7 temp: 27.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST8000VN004-3CP101
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: SC60
ID-4: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST8000VN004-3CP101
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: SC60
Partition:
ID-1: / raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 1.05 TiB (58.8%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 1.05 TiB (58.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 1.05 TiB (58.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 1.05 TiB (58.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 34.38 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
ID-2: swap-2 type: zram size: 31.25 GiB used: 11.5 MiB (0.0%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 24
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 35.0 C mobo: 25.0 C gpu: amdgpu temp: 43.0 C
mem: 34.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 0
Info:
Processes: 539 Uptime: 1m wakeups: 0 Memory: total: 32 GiB
available: 31.25 GiB used: 4.86 GiB (15.5%) Init: systemd v: 255
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1848
pm: pacman pkgs: 1837 libs: 569 tools: octopi,paru pm: flatpak pkgs: 11
Shell: fish v: 3.6.4 default: Bash v: 5.2.21 running-in: konsole
inxi: 3.3.31
Garuda (2.6.21-1):
System install date: 2022-09-16
Last full system update: 2023-12-18
Is partially upgraded: No
Relevant software: snapper NetworkManager mkinitcpio
Windows dual boot: No/Undetected
Failed units:
Hi there,
I’ve got the exact same issue after the mesa/vulkan upgrade, with the same error when launching any game :
Assertion failed: !status && "vkGetPhysicalDeviceSurfaceSupportKHR", file ../src-wine/dlls/winevulkan/loader_thunks.c, line 4964
EDIT: For me, downgrading only the package vulkan-radeon using below command seems to fix the issue.
sudo pacman -U file:///var/cache/pacman/pkg/vulkan-radeon-1:23.2.1-2-x86_64.pkg.tar.zst
╰─ garuda-inxi
System:
Kernel: 6.6.7-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=81917e19-1ef7-4f5d-adb2-efa1f1cc34fe rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=b5f5224c-7f0c-4f99-b519-7c88d92f1a1a loglevel=3
acpi_enforce_resources=lax ibt=off
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.11 wm: kwin_wayland vt: 4
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B550 AORUS ELITE V2 v: x.x
serial: <superuser required> UEFI: American Megatrends LLC. v: FC
date: 03/24/2023
CPU:
Info: model: AMD Ryzen 7 5800X3D bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 2 microcode: 0xA20120A
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 96 MiB desc: 1x96 MiB
Speed (MHz): avg: 3507 high: 3593 min/max: 2200/4549 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3589 2: 3591
3: 3400 4: 3400 5: 3590 6: 3400 7: 3589 8: 3585 9: 3592 10: 3593 11: 3593
12: 3592 13: 3400 14: 3400 15: 3400 16: 3400 bogomips: 108597
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 21 [Radeon RX 6800/6800 XT / 6900 XT]
vendor: XFX Speedster MERC 319 driver: amdgpu v: kernel arch: RDNA-2
code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4
speed: 16 GT/s lanes: 16 ports: active: DP-3 empty: DP-1,DP-2,HDMI-A-1
bus-ID: 09:00.0 chip-ID: 1002:73bf class-ID: 0300
Device-2: Logitech Webcam C270 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-1.1:3
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: wayland server: X.org v: 1.21.1.10 with: Xwayland v: 23.2.3
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: DP-3 res: 2560x1440 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi wayland: drv: radeonsi x11:
drv: radeonsi inactive: gbm
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.3.1-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 6900 XT (radeonsi
navi21 LLVM 16.0.6 DRM 3.54 6.6.7-zen1-1-zen) device-ID: 1002:73bf
memory: 15.62 GiB unified: no display-ID: :0.0
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 09:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0b:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Logitech Webcam C270 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-1.1:3
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
API: ALSA v: k6.6.7-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
vendor: AzureWave driver: ath10k_pci v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 bus-ID: 04:00.0 chip-ID: 168c:0042 class-ID: 0280
IF: wlp4s0 state: down mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: IMC Networks driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6.3:4 chip-ID: 13d3:3501
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
rfk-block: hardware: no software: no address: <filter> bt-v: 4.2 lmp-v: 8
status: discoverable: no pairing: no
Drives:
Local Storage: total: 1.83 TiB used: 466.65 GiB (24.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:2 vendor: Kingston model: SNV2S500G
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: ELFK0S.6 temp: 36.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Crucial model: CT1000P3SSD8
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: P9CR30A temp: 38.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 840 PRO Series
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 6B0Q
ID-4: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT256MX100SSD1
size: 238.47 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: MU02
Partition:
ID-1: / raw-size: 431.07 GiB size: 431.07 GiB (100.00%)
used: 168.54 GiB (39.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:3
ID-3: /home raw-size: 431.07 GiB size: 431.07 GiB (100.00%)
used: 168.54 GiB (39.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
ID-4: /var/log raw-size: 431.07 GiB size: 431.07 GiB (100.00%)
used: 168.54 GiB (39.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
ID-5: /var/tmp raw-size: 431.07 GiB size: 431.07 GiB (100.00%)
used: 168.54 GiB (39.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.26 GiB used: 2 MiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
ID-2: swap-2 type: partition size: 34.39 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:5
Sensors:
System Temperatures: cpu: 48.1 C mobo: 26.0 C gpu: amdgpu temp: 40.0 C
mem: 38.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 0
Info:
Processes: 463 Uptime: 29m wakeups: 0 Memory: total: 32 GiB
available: 31.26 GiB used: 7.92 GiB (25.3%) Init: systemd v: 255
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
pm: pacman pkgs: 1481 libs: 402 tools: octopi,pamac,paru Shell: Zsh v: 5.9
running-in: konsole inxi: 3.3.31
Garuda (2.6.21-1):
System install date: 2023-05-03
Last full system update: 2023-12-19 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units:
Same issue on my side.
Only roll-back with snapper tools helped.
I’m also having this issue ;-;
I see it’s not a specific hardware issue, as I’m running a Nvidia card and most other people I see with this issue have AMD cards.
I’ll try downgrading vulkan see if that helps ^~^
Thank you @Azerist your command helped to resolve my issue with not working warframe and jagged alliance3
Ok, suddenly it worked on my end.
I ran the update without vulkan-radeon and lib32-vulkan-radeon which still caused it to break. I then installed those two as well and ran systemctl --user daemon-reload when prompted after the update and it worked properly. Vulcaninfo doesn’t crash anymore and games work normally.
I did read some post about something like this while searching around that mentioned mkinitcpio, which was updated today, so perhaps that did it?
Edit: It was vulkan-icd-loader. Its been updated and that was most likely what solved it for me.
Not 100% sure but i think garuda doesn’t use mkinitpcio
couldn’t end up fixing it my end 
had to rollback to a pre update snapshot
In my case helped solution from arch forum:
“export VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/nvidia_icd.json”
But I just updated system and package “vulkan-icd-loader” got updated and now all is working again.
I can confirm this is working for me, the issue was definitely with vulkan-icd-loader.
It is now updated to v1.3.274-1 vulkan-icd-loader - Arch Linux Packages. I think everyone should be safe to re-update now ^~^
Older installs might still be running that if they haven’t switched. You can check if you are using it or not by examining your “Relevent software” part of garuda-inxi (it’s near the end).
Example:
Relevant software: snapper NetworkManager dracut
New ISO installations use dracut by default.
Seems to be fixed indeed, i just ran a full upgrade and everything works.
So I click on the Updates systray icon, see the list of Updates given, even click Refresh, but this thing still reads 1.3.269-1 -> 1.3.273-1 (ie. the broken version rather than the mentioned-by-you fix version). This is already on a new day, new reboot freshness. What else but “Refresh” need one do to see that?
Sounds like some mirrors still need time to catch up then.
Depending on what you are checking it with (since wasn’t mentioned what exactly you are checking that with), I would check with the garuda-update command in terminal and see if the version is ready to download there.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.