Why update conflicts will occur if GARUDA Lxqt-KWin used?

 ╰─λ garuda-inxi
System:
  Kernel: 6.6.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=2ed2acf4-12e7-497f-8e9e-ffd85e2b465f rw rootflags=subvol=@
    quiet resume=UUID=2f3ba04a-a237-4756-a5f2-6aab596e0917 loglevel=3 ibt=off
  Desktop: GNOME v: 45.1 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM
    v: 45.0.1 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X412DA_X412DA
    v: 1.0 serial: <superuser required>
  Mobo: ASUSTeK model: X412DA v: 1.0 serial: <superuser required>
    UEFI: American Megatrends v: X412DA.316 date: 10/08/2021
Battery:
  ID-1: BAT0 charge: 14.8 Wh (56.7%) condition: 26.1/37.1 Wh (70.4%)
    power: 5.5 W volts: 7.8 min: 7.8 model: ASUSTeK ASUS Battery type: Li-ion
    serial: N/A status: discharging cycles: 433
CPU:
  Info: model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx bits: 64
    type: MT MCP arch: Zen/Zen+ note: check gen: 1 level: v3 note: check
    built: 2019 process: GF 12nm family: 0x17 (23) model-id: 0x18 (24)
    stepping: 1 microcode: 0x8108109
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
    desc: 1x4 MiB
  Speed (MHz): avg: 1448 high: 2100 min/max: 1400/2100 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1223 2: 1263
    3: 1400 4: 2100 5: 1400 6: 1400 7: 1400 8: 1400 bogomips: 33537
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:15d8
    class-ID: 0300 temp: 37.0 C
  Device-2: IMC Networks USB2.0 HD UVC WebCam driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2.1:3
    chip-ID: 13d3:56dd class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.9 with: Xwayland v: 23.2.2
    compositor: gnome-shell driver: X: loaded: amdgpu
    unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1280x720 s-dpi: 96 s-size: 339x191mm (13.35x7.52")
    s-diag: 389mm (15.32")
  Monitor-1: eDP-1 mapped: eDP model: BOE Display 0x07f6 built: 2018
    res: 1280x720 hz: 60 dpi: 105 gamma: 1.2 size: 309x174mm (12.17x6.85")
    diag: 355mm (14") ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: Vulkan v: 1.3.269 layers: 3 device: 0 type: integrated-gpu name: AMD
    Radeon Vega 8 Graphics (RADV RAVEN) driver: mesa radv v: 23.2.1-arch1.2
    device-ID: 1002:15d8 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
    (LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.2.1-arch1.2 (LLVM
    16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 03:00.1
    chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: snd_pci_acp3x
    v: kernel alternate: snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x,
    snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir,
    snd_sof_amd_rembrandt, snd_sof_amd_vangogh pcie: gen: 3 speed: 8 GT/s
    lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.6.1-zen1-1-zen status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.85 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:24fd class-ID: 0280
  IF: wlp1s0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-2.2:4
    chip-ID: 8087:0a2b class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: disabled
    rfk-block: hardware: no software: no address: see --recommends
Drives:
  Local Storage: total: 476.94 GiB used: 17.18 GiB (3.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston
    model: RBUSNS8154P3512GJ3 size: 476.94 GiB block-size: physical: 512 B
    logical: 512 B speed: 15.8 Gb/s lanes: 2 tech: SSD serial: <filter>
    fw-rev: E8FK1A.2 temp: 28.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
    used: 17.18 GiB (3.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
    used: 17.18 GiB (3.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
    used: 17.18 GiB (3.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
    used: 17.18 GiB (3.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p3 maj-min: 259:3
  ID-2: swap-2 type: zram size: 5.73 GiB used: 159.5 MiB (2.7%)
    priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 37.5 C mobo: N/A gpu: amdgpu temp: 37.0 C
  Fan Speeds (rpm): cpu: 2000
Info:
  Processes: 299 Uptime: 49m wakeups: 0 Memory: total: 6 GiB
  available: 5.73 GiB used: 2.34 GiB (40.8%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1133
  pm: pacman pkgs: 1102 libs: 365 tools: paru pm: flatpak pkgs: 31 Shell: Bash
  v: 5.2.15 running-in: gnome-terminal inxi: 3.3.31
Garuda (2.6.19-2):
  System install date:     2023-11-17
  Last full system update: 2023-11-19
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            


I read about possibility of conflicts here:-

Update conflicts are something that can be expected in rolling releases, especially in some moments, like now, when a lot of KDE packages are bring reworked in preparation to KDE6.
Some of these changes are handled by common tools, like garuda-update, while others need adjustment of edition-specific configuration files.
In this case, lxqt is now uncovered, but this is strictly true only for the ISO images (no new images). Normally these fixes are trivial, so, when requested, are implemented anyway. At least as long as this will be manageable…

5 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.