Warning: inxi: local (3.3.25.1-1) is newer than community

[email protected] in ~ as šŸ§™ took 30s
ā•°ā”€Ī» garuda-inxi
System:
Kernel: 6.1.9-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=8b137375-4cdd-49aa-9d1d-4a56bde51ee9 rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.26.5 tk: Qt v: 5.15.8 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME Z490-A v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 2601 date: 05/17/2022
CPU:
Info: model: Intel Core i7-10700K bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA5 (165) stepping: 5 microcode: 0xF4
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1362 high: 3800 min/max: 800/5100 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 3800 3: 3800
4: 800 5: 800 6: 800 7: 800 8: 801 9: 801 10: 800 11: 3800 12: 802 13: 800
14: 800 15: 800 16: 800 bogomips: 121596
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
ports: active: HDMI-A-1 empty: DP-1, DP-2, DVI-D-1, HDMI-A-2
bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300 temp: 52.0 C
Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.7
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
s-diag: 777mm (30.58")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: AOC Q32G1WG4 serial: <filter>
built: 2019 res: 2560x1440 dpi: 93 gamma: 1.2 size: 697x393mm (27.44x15.47")
diag: 800mm (31.5") ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.4 renderer: AMD Radeon RX 580 Series
(polaris10 LLVM 15.0.7 DRM 3.49 6.1.9-zen1-2-zen) direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
chip-ID: 8086:06c8 class-ID: 0403
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0 class-ID: 0403
Sound API: ALSA v: k6.1.9-zen1-2-zen running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
Device-1: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel pcie:
gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 04:00.0 chip-ID: 8086:15f3
class-ID: 0200
IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 3.18 TiB used: 8.35 GiB (0.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WDS250G2B0C-00PXH0 size: 232.89 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 211070WD temp: 34.9 C
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung
model: SSD 970 EVO Plus 250GB size: 232.89 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 42.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD130 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
rpm: 7200 serial: <filter> rev: ACF0 scheme: GPT
Partition:
ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 8.35 GiB (3.6%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:3
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:2
ID-3: /home raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 8.35 GiB (3.6%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:3
ID-4: /var/log raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 8.35 GiB (3.6%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:3
ID-5: /var/tmp raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 8.35 GiB (3.6%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:3
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A gpu: amdgpu temp: 52.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1183
Info:
Processes: 326 Uptime: 5m wakeups: 0 Memory: 31.25 GiB used: 2.61 GiB (8.3%)
Init: systemd v: 252 default: graphical tool: systemctl Compilers:
gcc: 12.2.1 Packages: pm: pacman pkgs: 1316 libs: 332
tools: gnome-software,octopi,pamac,paru Shell: fish v: 3.6.0
running-in: konsole inxi: 3.3.25
Garuda (2.6.14-1):
System install date:     2023-02-08
Last full system update: 2023-02-08
Is partially upgraded:   No
Relevant software:       snapper NetworkManager mkinitcpio
Windows dual boot:       No/Undetected
Failed units:
:: Starting full system upgrade...
warning: inxi: local (3.3.25.1-1) is newer than community (3.3.24.1-4)
warning: python-cryptography: local (39.0.1-1) is newer than extra (39.0.0-1)
warning: python-setuptools: local (1:67.2.0-1) is newer than extra (1:67.1.0-1)
warning: python-trove-classifiers: local (2023.2.8-1) is newer than extra (2023.1.20-1)
there is nothing to do

Is there something to do here? thank you

What command are you using in the terminal to update your system?
You should use garude-update. Although that doesn't prevent that type of warnings to happen, but just making sure you are using garuda-update.

2 Likes

Just update

ok now I use garuda-update and got one warning

warning: python-trove-classifiers: local (2023.2.8-1) is newer than extra (2023.1.20-1)
there is nothing to do

ok running sudo pacman -Syu no warnings

ā•­ā”€[email protected] in ~ as šŸ§™ took 28s
ā•°ā”€Ī» sudo pacman -Syu
Garuda Linux is updated via the "garuda-update" command instead of pacman -Syu. https://wiki.garudalinux.org/en/garuda-update
Would you like to run "garuda-update" instead? (i = never ask again/ignore) [y/N/i] y

:: Synchronizing package databases...
garuda is up to date
core is up to date
extra is up to date
community is up to date
multilib is up to date
chaotic-aur                             2,3 MiB  2,87 MiB/s 00:01 [------------------------------------] 100%

--> Refreshing mirrorlists using rate-mirrors, please be patient..šŸµ
:: Synchronizing package databases...
garuda downloading...
core downloading...
extra downloading...
community downloading...
multilib downloading...
chaotic-aur downloading...
:: Starting full system upgrade...
there is nothing to do

System updated! šŸ§

do not run sudo pacman -Syu
just run

garuda-update

3 Likes

ok It was because of the warnings
thank you

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.