Upgrade errors

System:
Kernel: 6.1.56-1-lts arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=53e07a01-a231-4637-a873-763292a95245 rw rootflags=subvol=@
quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: Dell product: Inspiron 3670 v: N/A
serial: <superuser required> Chassis: type: 3 serial: <superuser required>
Mobo: Dell model: 0R6JMP v: A00 serial: <superuser required> UEFI: Dell
v: 2.15.0 date: 02/21/2020
CPU:
Info: model: Intel Core i5-9400 bits: 64 type: MCP arch: Coffee Lake
gen: core 9 level: v3 note: check built: 2018 process: Intel 14nm family: 6
model-id: 0x9E (158) stepping: 0xD (13) microcode: 0xFA
Topology: cpus: 1x cores: 6 smt: <unsupported> cache: L1: 384 KiB
desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB L3: 9 MiB
desc: 1x9 MiB
Speed (MHz): avg: 3882 high: 3906 min/max: 800/4100 scaling:
driver: intel_pstate governor: performance cores: 1: 3899 2: 3787 3: 3903
4: 3906 5: 3898 6: 3901 bogomips: 34814
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] vendor: Dell
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: DP-1,HDMI-A-1 empty: none bus-ID: 00:02.0
chip-ID: 8086:3e98 class-ID: 0300
Device-2: Microdia Dual Mode Camera (8006 VGA) driver: hid-generic,usbhid
type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-9.4:6
chip-ID: 0c45:8006 class-ID: 0301
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.2.1 compositors:
1: kwin_x11 2: Tabby driver: X: loaded: intel unloaded: modesetting
alternate: fbdev,vesa dri: i965 gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 3520x1080 s-dpi: 96 s-size: 928x285mm (36.54x11.22")
s-diag: 971mm (38.22")
Monitor-1: DP-1 mapped: DP1 pos: right model: Dell E2020H serial: <filter>
built: 2020 res: 1600x900 hz: 60 dpi: 95 gamma: 1.2
size: 430x240mm (16.93x9.45") diag: 494mm (19.4") ratio: 16:9 modes:
max: 1600x900 min: 720x400
Monitor-2: HDMI-A-1 mapped: HDMI1 pos: primary,left model: Samsung C24F390
serial: <filter> built: 2020 res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2
size: 520x290mm (20.47x11.42") diag: 598mm (23.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris x11: drv: iris
inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 23.2.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics 630 (CFL
GT2) device-ID: 8086:3e98 memory: 30.43 GiB unified: yes
API: Vulkan v: 1.3.264 layers: 3 device: 0 type: integrated-gpu name: Intel
UHD Graphics 630 (CFL GT2) driver: mesa intel v: 23.2.1-arch1.2
device-ID: 8086:3e98 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
(LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.2.1-arch1.2 (LLVM
16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
chip-ID: 8086:a348 class-ID: 0403
API: ALSA v: k6.1.56-1-lts status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.81 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Dell driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
vendor: Dell Vostro 3470 driver: ath9k v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 168c:0036 class-ID: 0280
IF: wlp3s0 state: down mac: <filter>
Bluetooth:
Device-1: Qualcomm Atheros driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:7 chip-ID: 0cf3:e005
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: no class-ID: 7c0104
Drives:
Local Storage: total: 1.36 TiB used: 459.66 GiB (32.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WDS500G2B0C-00PXH0 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 211070WD temp: 30.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: CC45 scheme: GPT
Partition:
ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 155.54 GiB (33.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 155.54 GiB (33.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 155.54 GiB (33.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 155.54 GiB (33.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.16 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 6 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 32.0 C pch: 49.0 C mobo: 32.0 C
Fan Speeds (rpm): cpu: 1003
Info:
Processes: 284 Uptime: 18d 7h 32m wakeups: 0 Memory: total: 32 GiB
available: 31.16 GiB used: 6.87 GiB (22.0%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: pm: dpkg pkgs: 0 pm: pacman pkgs: 2032 libs: 473
tools: octopi,pamac,paru Shell: fish v: 3.6.1 running-in: yakuake
inxi: 3.3.30
Garuda (2.6.17-1):
System install date:     2022-02-10
Last full system update: 2023-10-08
Is partially upgraded:   No
Relevant software:       snapper NetworkManager mkinitcpio
Windows dual boot:       Probably (Run as root to verify)
Failed units:

:: Starting full system upgrade...

:: Replace kirigami-addons with extra/kirigami-addons5? [Y/n] y

:: Replace libinput_gestures_qt with chaotic-aur/libinput-gestures-qt? [Y/n] y

resolving dependencies...

looking for conflicting packages...

error: failed to prepare transaction (could not satisfy dependencies)

:: installing kio5 (5.111.0-1) breaks dependency 'kio' required by kipi-plugins

:: installing kxmlgui5 (5.111.0-1) breaks dependency 'kxmlgui' required by libkipi

:: installing kservice5 (5.111.0-1) breaks dependency 'kservice' required by libkipi

:: installing kauth5 (5.111.0-1) breaks dependency 'kauth' required by samba-mounter-git

:: installing kcmutils5 (5.111.0-1) breaks dependency 'kcmutils' required by samba-mounter-git

:: installing kconfig5 (5.111.0-1) breaks dependency 'kconfig' required by samba-mounter-git

:: installing kio5 (5.111.0-1) breaks dependency 'kio' required by samba-mounter-git

:: installing ki18n5 (5.111.0-1) breaks dependency 'ki18n' required by samba-mounter-git

:: installing solid5 (5.111.0-1) breaks dependency 'solid' required by samba-mounter-git

find-the-command: "/usr/bin/mcfly" is not found locally, searching in repositories...

find-the-command: /var/cache/pkgfile/*.files are out of date, update? [Y/n]

Due to the Arch activities for KDE described in this announcement, some AUR package maintainers haven’t adjusted their packages yet accordingly:

The best thing would be to temporarily remove those AUR packages and update (and if a comment has not been left yet to the mainteiner in the AUR, leave a comment there possibly).
You can uninstall samba-mounter-git, libkipi, kipi-plugins.
I see also a comment about it here, for example:
https://aur.archlinux.org/packages/libkipi#comment-939450

5 Likes

I ran into that with a few AUR pkgs a couple days ago. Installing them blindly with a helper using paru & ‘–noconfirm’ failed at several points.

Building them one-by-one using PKGBUILDs/makepkg worked swell. Or using paru without any conditions worked. Several of my “normal” AUR pkgs needed user-intervention, but ALPM did well that way with either process.

1 Like