Trying to run DWM; Xorg Is Not Running

Hello EveryOne , namaste I am Trying to run garuda with dwm , And TO DO that i installed xorg and edited my .xinitrc but it is not working , here is the error log . Thank you :smiley:

And I Would Like To highLight This Log: Errors from xkbcomp are not fatal to the X server
Failed to connect to bus: No medium found

X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
Current Operating System: Linux hackerman 6.7.1-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Sun, 21 Jan 2024 22:13:51 +0000 x86_64
Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=c22151da-74d6-4bf4-9f3a-3e098a3c8dc1 rw rootflags=subvol=@ quiet resume=UUID=e2cece78-89ec-4667-b33a-c1f1de9230f4 loglevel=3 ibt=off
 
Current version of pixman: 0.43.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 28 13:23:38 2024
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86CameraAccessEnable
> Warning:          Could not resolve keysym XF86CameraAccessDisable
> Warning:          Could not resolve keysym XF86CameraAccessToggle
> Warning:          Could not resolve keysym XF86NextElement
> Warning:          Could not resolve keysym XF86PreviousElement
> Warning:          Could not resolve keysym XF86AutopilotEngageToggle
> Warning:          Could not resolve keysym XF86MarkWaypoint
> Warning:          Could not resolve keysym XF86Sos
> Warning:          Could not resolve keysym XF86NavChart
> Warning:          Could not resolve keysym XF86FishingChart
> Warning:          Could not resolve keysym XF86SingleRangeRadar
> Warning:          Could not resolve keysym XF86DualRangeRadar
> Warning:          Could not resolve keysym XF86RadarOverlay
> Warning:          Could not resolve keysym XF86TraditionalSonar
> Warning:          Could not resolve keysym XF86ClearvuSonar
> Warning:          Could not resolve keysym XF86SidevuSonar
> Warning:          Could not resolve keysym XF86NavInfo
Errors from xkbcomp are not fatal to the X server
Failed to connect to bus: No medium found
dbus-update-activation-environment: error: unable to connect to D-Bus: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
/etc/X11/xinit/xinitrc: line 51: twm: command not found
/etc/X11/xinit/xinitrc: line 52: xclock: command not found
/etc/X11/xinit/xinitrc: line 55: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 53: xterm: command not found
/etc/X11/xinit/xinitrc: line 54: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

Hi there, welcome to the forum.
Please always provide your garuda-inxi as required in the topic template.

4 Likes
Kernel: 6.7.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=c22151da-74d6-4bf4-9f3a-3e098a3c8dc1 rw rootflags=subvol=@
    quiet resume=UUID=e2cece78-89ec-4667-b33a-c1f1de9230f4 loglevel=3 ibt=off
  Desktop: dwm v: 6.4 vt: 1 dm: 1: LightDM v: 1.32.0 note: stopped 2: SDDM
    note: stopped Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: LENOVO product: 80LS v: Lenovo B40-80
    serial: <superuser required> Chassis: type: 10 v: Lenovo B40-80
    serial: <superuser required>
  Mobo: LENOVO model: Lenovo B40-80 v: No DPK serial: <superuser required>
    UEFI-[Legacy]: LENOVO v: A8CN38WW(V2.03) date: 04/24/2015
Battery:
  ID-1: BAT1 charge: 4.2 Wh (57.5%) condition: 7.3/28.5 Wh (25.6%)
    power: 1069.3 W volts: 16.4 min: 14.8 model: COMPAL PABAS0241231
    type: Li-ion serial: <filter> status: charging
CPU:
  Info: model: Intel Core i3-4005U bits: 64 type: MT MCP arch: Haswell
    gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
    family: 6 model-id: 0x45 (69) stepping: 1 microcode: 0x26
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
    L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 799 high: 800 min/max: 800/1600 scaling:
    driver: intel_cpufreq governor: schedutil cores: 1: 800 2: 800 3: 800 4: 798
    bogomips: 13569
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel Haswell-ULT Integrated Graphics vendor: Lenovo driver: i915
    v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1
    empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0a16 class-ID: 0300
  Device-2: Realtek Lenovo EasyCamera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-6:3 chip-ID: 0bda:579c
    class-ID: 0e02 serial: <filter>
  Display: server: X.Org v: 21.1.11 with: Xwayland v: 23.2.4
    compositor: xcompmgr driver: X: loaded: modesetting unloaded: vesa
    alternate: fbdev,intel dri: crocus gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: AU Optronics 0x333c built: 2013 res: 1366x768
    hz: 60 dpi: 112 gamma: 1.2 size: 309x173mm (12.17x6.81") diag: 354mm (13.9")
    ratio: 16:9 modes: 1366x768
  API: EGL v: 1.5 hw: drv: intel crocus platforms: device: 0 drv: crocus
    device: 1 drv: swrast surfaceless: drv: crocus x11: drv: crocus
    inactive: gbm,wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 23.3.4-arch1.2
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 4400 (HSW
    GT2) device-ID: 8086:0a16 memory: 1.46 GiB unified: yes
  API: Vulkan v: 1.3.276 layers: 3 device: 0 type: integrated-gpu name: Intel
    HD Graphics 4400 (HSW GT2) driver: mesa intel v: 23.3.4-arch1.2
    device-ID: 8086:0a16 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
    (LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.3.4-arch1.2 (LLVM
    16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
  Device-1: Intel Haswell-ULT HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
  Device-2: Intel 8 Series HD Audio vendor: Lenovo 8 driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
  API: ALSA v: k6.7.1-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.0.1 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
    port: 3000 bus-ID: 08:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp8s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  Device-2: Intel Wireless 3160 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 09:00.0 chip-ID: 8086:08b4 class-ID: 0280
  IF: wlp9s0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-7:4 chip-ID: 8087:07dc
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 4.0
    lmp-v: 6 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
  Local Storage: total: 465.76 GiB used: 18.03 GiB (3.9%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ABF050
    size: 465.76 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5400 serial: <filter> fw-rev: 5E scheme: MBR
Partition:
  ID-1: / raw-size: 456.96 GiB size: 456.96 GiB (100.00%)
    used: 18.03 GiB (3.9%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-2: /home raw-size: 456.96 GiB size: 456.96 GiB (100.00%)
    used: 18.03 GiB (3.9%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-3: /var/log raw-size: 456.96 GiB size: 456.96 GiB (100.00%)
    used: 18.03 GiB (3.9%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-4: /var/tmp raw-size: 456.96 GiB size: 456.96 GiB (100.00%)
    used: 18.03 GiB (3.9%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/sda2 maj-min: 8:2
  ID-2: swap-2 type: zram size: 5.71 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 50.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 178 Uptime: 25m wakeups: 0 Memory: total: 6 GiB
  available: 5.71 GiB used: 2.53 GiB (44.4%) Init: systemd v: 255
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
  pm: pacman pkgs: 1501 libs: 427 tools: octopi,paru Shell: Bash v: 5.2.26
  running-in: kitty inxi: 3.3.31
Garuda (2.6.22-1):
  System install date:     2024-01-12
  Last full system update: 2024-01-28
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       <superuser required>
  Failed units:            

This is my garuda-inxi

I Was able to resolve the issue by changing my .xinitrc .
Here is the link to .xinitrc file that works .

I would recommend You backup Your default .xinitrxc file because i do not know if this will work on your machine .

Part of the template

  • Format terminal output (including your garuda-inxi) as a code block by clicking the preformatted text button (</>) , or put three tildes (~) above and below the text
1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.