System:
Kernel: 6.9.4-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=23ffde4f-cb01-4949-97b4-6cd8d8368277 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.0.5 tk: Qt v: N/A info: frameworks v: 6.3.0
wm: kwin_x11 vt: 2 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: Z790 LiveMixer
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: 13.02 date: 12/29/2023
CPU:
Info: model: 13th Gen Intel Core i9-13900KF bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1
microcode: 0x123
Topology: cpus: 1x cores: 24 mt: 8 tpc: 2 st: 16 threads: 32 smt: enabled
cache: L1: 2.1 MiB desc: d-16x32 KiB, 8x48 KiB; i-8x32 KiB, 16x64 KiB
L2: 32 MiB desc: 8x2 MiB, 4x4 MiB L3: 36 MiB desc: 1x36 MiB
Speed (MHz): avg: 875 high: 1101 min/max: 800/5800:4300 scaling:
driver: intel_pstate governor: powersave cores: 1: 1100 2: 800 3: 1100
4: 800 5: 1100 6: 800 7: 1101 8: 800 9: 1100 10: 800 11: 1101 12: 800
13: 1100 14: 800 15: 1100 16: 800 17: 800 18: 800 19: 800 20: 800 21: 800
22: 800 23: 800 24: 800 25: 800 26: 800 27: 800 28: 800 29: 800 30: 800
31: 800 32: 800 bogomips: 191692
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA AD103 [GeForce RTX 4080] vendor: Gigabyte driver: nvidia
v: 550.90.07 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-04) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 8
link-max: lanes: 16 ports: active: none off: HDMI-A-1
empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0 chip-ID: 10de:2704 class-ID: 0300
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.0
compositor: kwin_x11 driver: X: loaded: nvidia gpu: nvidia,nvidia-nvswitch
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 139 s-size: 702x392mm (27.64x15.43")
s-diag: 804mm (31.65")
Monitor-1: HDMI-A-1 mapped: HDMI-0 note: disabled model: MSI G321CU
built: 2022 res: 3840x2160 dpi: 139 gamma: 1.2
size: 700x390mm (27.56x15.35") diag: 800mm (31.5") ratio: 16:9 modes:
max: 3840x2160 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia
inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.90.07
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4080/PCIe/SSE2
memory: 15.62 GiB
API: Vulkan v: 1.3.279 layers: 14 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 4080 driver: nvidia v: 550.90.07
device-ID: 10de:2704 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
(LLVM 17.0.6 256 bits) driver: mesa llvmpipe v: 24.1.1-arch1.1 (LLVM
17.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: Intel Raptor Lake High Definition Audio vendor: ASRock
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403
Device-2: NVIDIA vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:22bb class-ID: 0403
API: ALSA v: k6.9.4-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASRock driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 04:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd
Drives:
Local Storage: total: 23.22 TiB used: 9.62 TiB (41.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:5 vendor: TeamGroup
model: T-FORCE TM8FF1001T size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 126 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: EQFM22.1 temp: 53.9 C scheme: MBR
ID-2: /dev/nvme1n1 maj-min: 259:9 vendor: Seagate model: BarraCuda Q5
ZP2000CV30001 size: 1.82 TiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: SU5SH017
temp: 33.9 C scheme: GPT
ID-3: /dev/nvme2n1 maj-min: 259:0 vendor: TeamGroup
model: T-FORCE TM8FPZ004T size: 3.64 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: EIFM51.3 temp: 35.9 C scheme: GPT
ID-4: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3500418AS
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: CC38 scheme: GPT
ID-5: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST12000NM0127
size: 10.91 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: G006 scheme: GPT
ID-6: /dev/sdc maj-min: 8:32 vendor: Toshiba model: MQ03UBB200
size: 1.82 TiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.1
spd: 480 Mb/s lanes: 1 mode: 2.0 tech: HDD rpm: 5400 serial: <filter>
fw-rev: 5438 scheme: MBR
ID-7: /dev/sdd maj-min: 8:48 vendor: SanDisk model: USB 3.2Gen1
size: 28.67 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter>
fw-rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-8: /dev/sde maj-min: 8:64 vendor: Western Digital
model: WD40NMZW-11GX6S1 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0
tech: HDD rpm: 5400 serial: <filter> fw-rev: 1018 scheme: GPT
Partition:
ID-1: / raw-size: 464.76 GiB size: 464.76 GiB (100.00%)
used: 366.5 GiB (78.9%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:6
ID-2: /boot/efi raw-size: 1.03 GiB size: 1.02 GiB (99.80%)
used: 584 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p3 maj-min: 259:8
ID-3: /home raw-size: 464.76 GiB size: 464.76 GiB (100.00%)
used: 366.5 GiB (78.9%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:6
ID-4: /var/log raw-size: 464.76 GiB size: 464.76 GiB (100.00%)
used: 366.5 GiB (78.9%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:6
ID-5: /var/tmp raw-size: 464.76 GiB size: 464.76 GiB (100.00%)
used: 366.5 GiB (78.9%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:6
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 46.86 GiB used: 1.41 GiB (3.0%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 32
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 31.0 C mobo: N/A gpu: nvidia temp: 45 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Info:
Memory: total: 48 GiB available: 46.86 GiB used: 7.59 GiB (16.2%)
Processes: 603 Power: uptime: 11h 32m states: freeze,mem,disk
suspend: deep avail: s2idle wakeups: 1 hibernate: platform avail: shutdown,
reboot, suspend, test_resume image: 18.7 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
tool: systemctl
Packages: 2219 pm: pacman pkgs: 2213 libs: 624 tools: gnome-software,
octopi, pamac, paru pm: flatpak pkgs: 6 Compilers: clang: 17.0.6
gcc: 14.1.1 Shell: garuda-inxi default: Bash v: 5.2.26
running-in: lxterminal inxi: 3.3.34
Garuda (2.6.26-1):
System install date: 2024-06-15
Last full system update: 2024-06-15
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: No/Undetected
Failed units:
i would like to warn anyone with GTX4080 card that a new install of Garuda might be very challenging after the latest nvidea drivers update.
To get it running on a X11 window manager, follow the steps below, i have not been able to get Wayland running successfully on my GTX4080 card with the new nvidia drivers.
The following steps for successfully completion of your installation.
1 ) Install Garuda with open source drivers NOT the nvidea drivers.
2) When running Garuda for the first time - DO NOT UPDATE - but go to settings, type in SDDM, pick the Behaviour menu option, and choose to automatically log in on X11 window manager. Then log out and log in again.
3) After this download the Linux LTS kernel with Garuda settings manager. If this is successful, (check details while installing,) reboot and run Garuda on the LTS kernel from your GRUB menu.
4) On reboot, run Garuada settings manager again, and delete the Zen kernel.
5) Now update Garuda and install the Nvidia graphic drivers at the end of the update, and anything else you want installed.
6 reboot!
7 Load Garuda from the LTS kernel again.
8 Go back to the Garuda settings manager, and install the Zen kernel again. Check details as it is installing, to see you do not get a error 10 when compiling the kernel when it compiles the nvidea DKMS drivers into it. If no error is thrown up, reboot into the zen kernel, update Garuda, and all should be well from now on.
If however if you do get an error 10 during the above process, you can try install Bauh and install tpm2- tools, and tpm2-tss-engine, and redo the zen kernel. (Delete it, and reboot in linux-lts and reinstall the zen kernel.)
All the best!
