Output from garuda-inxi:
System:
Kernel: 6.1.4-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=d01e7fb0-6fff-4413-9d57-aaf8569d7027 rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off
Desktop: GNOME v: 43.2 tk: GTK v: 3.24.36 wm: gnome-shell dm: GDM v: 43.0
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 81VW v: Lenovo IdeaPad S340-15IIL
serial: <superuser required> Chassis: type: 10 v: Lenovo IdeaPad S340-15IIL
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN
serial: <superuser required> UEFI: LENOVO v: CUCN27WW(V1.16)
date: 06/15/2021
Battery:
ID-1: BAT1 charge: 27.9 Wh (89.7%) condition: 31.1/36.0 Wh (86.3%)
volts: 12.9 min: 11.2 model: Celxpert L18C3PF6 type: Li-ion serial: <filter>
status: charging cycles: 933
CPU:
Info: model: Intel Core i7-1065G7 bits: 64 type: MT MCP arch: Ice Lake
gen: core 10 level: v4 note: check built: 2019-21 process: Intel 10nm
family: 6 model-id: 0x7E (126) stepping: 5 microcode: 0xB6
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 2 MiB desc: 4x512 KiB L3: 8 MiB
desc: 1x8 MiB
Speed (MHz): avg: 1136 high: 1200 min/max: 400/3900 scaling:
driver: intel_pstate governor: powersave cores: 1: 694 2: 1200 3: 1200
4: 1200 5: 1200 6: 1200 7: 1200 8: 1200 bogomips: 23961
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Iris Plus Graphics G7 vendor: Lenovo driver: i915 v: kernel
arch: Gen-11 process: Intel 10nm built: 2019-21 ports: active: eDP-1
empty: HDMI-A-1 bus-ID: 0000:00:02.0 chip-ID: 8086:8a52 class-ID: 0300
Device-2: Syntek Integrated Camera type: USB driver: uvcvideo
bus-ID: 1-6:3 chip-ID: 174f:2426 class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.6 with: Xwayland v: 22.1.7
compositor: gnome-shell driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: ChiMei InnoLux 0x15f5 built: 2017 res: 1920x1080
dpi: 142 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
ratio: 16:9 modes: 1920x1080
API: EGL/GBM Message: No known Wayland EGL/GBM data sources.
Audio:
Device-1: Intel Ice Lake-LP Smart Sound Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_icl
bus-ID: 0000:00:1f.3 chip-ID: 8086:34c8 class-ID: 0403
Sound API: ALSA v: k6.1.4-zen2-1-zen running: yes
Sound Interface: sndio v: N/A running: no
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.63 running: yes
Network:
Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
vendor: Lenovo driver: ath10k_pci v: kernel bus-ID: 0000:02:00.0
chip-ID: 168c:0042 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IF-ID-1: cali03f7a908b6f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-2: cali14da1d7591f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-3: cali4541d781899 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-4: cali45b903d51c7 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-5: cali4bea4b7f1a7 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-6: cali4c707356c72 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-7: cali6010e7d29bc state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-8: cali7a8dbe5481c state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-9: cali8cab353c26b state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-10: calia5bf9921cbc state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-11: calia6ed24f2fd7 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-12: calib0d10b95ed8 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-13: calibfdcd94479e state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-14: calicdc3bb13d85 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-15: docker0 state: down mac: <filter>
IF-ID-16: vxlan.calico state: unknown speed: N/A duplex: N/A mac: <filter>
Bluetooth:
Device-1: Qualcomm Atheros type: USB driver: btusb v: 0.8 bus-ID: 1-10:4
chip-ID: 0cf3:e500 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 8 state: down
bt-service: enabled,running rfk-block: hardware: no software: yes
address: <filter>
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode]
driver: intel_nvme_remap v: N/A port: 3060 bus-ID: 0000:00:17.0
chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
Local Storage: total: 238.47 GiB used: 38.73 GiB (16.2%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVLB256HBHQ-000L2 size: 238.47 GiB block-size: physical: 512 B
logical: 512 B type: SSD serial: <filter> rev: 3L1QEXH7 temp: 57.9 C
scheme: GPT
Partition:
ID-1: / raw-size: 238.17 GiB size: 238.17 GiB (100.00%)
used: 38.73 GiB (16.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 238.17 GiB size: 238.17 GiB (100.00%)
used: 38.73 GiB (16.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 238.17 GiB size: 238.17 GiB (100.00%)
used: 38.73 GiB (16.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 238.17 GiB size: 238.17 GiB (100.00%)
used: 38.73 GiB (16.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.45 GiB used: 1.65 GiB (22.1%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 60.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 371 Uptime: 1d 6h 13m wakeups: 13 Memory: 7.45 GiB
used: 5.18 GiB (69.5%) Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.0 alt: 11 Packages: 1282 pm: pacman
pkgs: 1272 libs: 356 tools: gnome-software,pamac,paru pm: snap pkgs: 10
Shell: fish v: 3.5.1 running-in: kitty inxi: 3.3.24
Garuda (2.6.14-1):
System install date: 2022-09-25
Last full system update: 2023-01-10 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager mkinitcpio
Windows dual boot: No/Undetected
Failed units: shadow.service
What i noticed when opened the options gui and headed to the security->Thunderbolt, i saw the message no Thunderbolt support. Although i have package bolt installed and tested that the systemcli recognizes it.