The icons disappear when hovering the mouse over them

System:
Kernel: 6.9.10-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=207d8cba-aea6-431d-a379-322b780b9374 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 6.1.3 tk: Qt v: N/A info: frameworks v: 6.4.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: PRO Z790-P WIFI (MS-7E06) v: 2.0
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: A.50 date: 03/23/2023
CPU:
Info: model: 13th Gen Intel Core i7-13700KF bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1
microcode: 0x123
Topology: cpus: 1x cores: 16 mt: 8 tpc: 2 st: 8 threads: 24 smt: enabled
cache: L1: 1.4 MiB desc: d-8x32 KiB, 8x48 KiB; i-8x32 KiB, 8x64 KiB
L2: 24 MiB desc: 8x2 MiB, 2x4 MiB L3: 30 MiB desc: 1x30 MiB
Speed (MHz): avg: 887 high: 1100 min/max: 800/5500:4300 scaling:
driver: intel_pstate governor: powersave cores: 1: 1099 2: 1100 3: 1100
4: 800 5: 800 6: 800 7: 1099 8: 800 9: 1100 10: 800 11: 1100 12: 800
13: 1100 14: 800 15: 800 16: 800 17: 800 18: 799 19: 801 20: 800 21: 800
22: 800 23: 800 24: 800 bogomips: 164044
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: Micro-Star MSI
driver: nvidia v: 555.58.02 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-06) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 16
ports: active: none off: DP-1,DP-2 empty: DP-3,HDMI-A-1 bus-ID: 01:00.0
chip-ID: 10de:2786 class-ID: 0300
Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.1
compositor: kwin_wayland driver: X: loaded: nvidia
unloaded: modesetting,nouveau alternate: fbdev,nv,vesa gpu: nvidia
d-rect: 5120x1440 display-ID: 0
Monitor-1: DP-1 pos: right res: 2560x1440 size: N/A modes: N/A
Monitor-2: DP-2 pos: primary,left res: 2560x1440 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia wayland: drv: nvidia
x11: drv: zink inactive: device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 555.58.02
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4070/PCIe/SSE2
memory: 11.71 GiB display-ID: :1.0
API: Vulkan v: 1.3.279 layers: 14 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 4070 driver: nvidia v: 555.58.02
device-ID: 10de:2786 surfaces: xcb,xlib,wayland device: 1 type: cpu
name: llvmpipe (LLVM 18.1.8 256 bits) driver: mesa llvmpipe
v: 24.1.4-arch1.2 (LLVM 18.1.8) device-ID: 10005:0000
surfaces: xcb,xlib,wayland
Audio:
Device-1: Intel Raptor Lake High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403
Device-2: NVIDIA AD104 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-3: C-Media CM106 Like Sound Device
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-1:2 chip-ID: 0d8c:0102 class-ID: 0300
Device-4: Medeli K66 driver: hid-generic,snd-usb-audio,usbhid type: USB
rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-9:7 chip-ID: 0a67:c006
class-ID: 0300 serial: <filter>
API: ALSA v: k6.9.10-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.2.1 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Raptor Lake-S PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:7a70 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Intel Ethernet I225-V vendor: Micro-Star MSI driver: igc
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 05:00.0
chip-ID: 8086:15f3 class-ID: 0200
IF: enp5s0 state: up speed: 2500 Mbps duplex: full mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:11 chip-ID: 8087:0033
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
lmp-v: 12 sub-v: 3678 hci-v: 12 rev: 3678 class-ID: 6c0104
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff
link-mode: peripheral accept service-classes: rendering, capturing, audio,
telephony
Drives:
Local Storage: total: 5.46 TiB used: 1.37 TiB (25.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:2 vendor: Western Digital
model: WDS100T2B0C-00PXH0 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 211210WD temp: 40.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Kingston model: SFYRD2000G
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: EIFK31.6 temp: 36.9 C
scheme: MBR
ID-3: /dev/nvme2n1 maj-min: 259:3 vendor: Fanxiang model: S880 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: SN11273 temp: 47.9 C
scheme: GPT
ID-4: /dev/sde maj-min: 8:64 vendor: Western Digital
model: WD10EADS-00M2B0 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0
tech: N/A serial: <filter> fw-rev: 1.75 scheme: MBR
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.82 TiB (100.00%) used: 462.84 GiB (24.8%)
fs: btrfs dev: /dev/nvme2n1p2 maj-min: 259:5
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 588 KiB (0.2%) fs: vfat dev: /dev/nvme2n1p1 maj-min: 259:4
ID-3: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 462.84 GiB (24.8%) fs: btrfs dev: /dev/nvme2n1p2 maj-min: 259:5
ID-4: /var/log raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 462.84 GiB (24.8%) fs: btrfs dev: /dev/nvme2n1p2 maj-min: 259:5
ID-5: /var/tmp raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 462.84 GiB (24.8%) fs: btrfs dev: /dev/nvme2n1p2 maj-min: 259:5
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.18 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 24 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 34.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 32 GiB available: 31.18 GiB used: 3.01 GiB (9.7%)
Processes: 455 Power: uptime: 3m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.41 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 256 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 2094 libs: 600 tools: gnome-software, octopi,
pamac, paru Compilers: clang: 18.1.8 gcc: 14.1.1 Shell: garuda-inxi
default: Bash v: 5.2.26 running-in: konsole inxi: 3.3.35
Garuda (2.6.26-1):
System install date:     2023-11-09
Last full system update: 2024-07-22
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       Probably (Run as root to verify)
Failed units:

Hi!
I use Garuda Dr460nized, KDE Plasma. Since I did an update a couple of months ago, when I hover the mouse over the icons in the dock or the top bar, they disappear and get grouped to one side.
How can I fix it?
I tried:
sudo pacman -S wayland
sudo pacman -S plasma
But it doesn’t work and I can’t think of anything else to try and I can’t find any information about this problem either.

I’m sorry, I still can’t upload images

Thank you for our help

Hi, i have exactly the same problem.

Any ideas?

Try X11 from log in screen.

2 Likes

I tried but I still have the same problem in X11

Solving errors after this long time is not easy. You should have directly restored the last working snapshot and addressed the problem in the forum.
Then you might have been able to see what the problem was.

Try to restore the default values with the garuda-assistant.
Or create first a new user to see if everything works there.

3 Likes

If I restore the defaults values., will I lost all?

Sure, for all the things you have changed.
Make a backup of your .config and .local folders or parts of them beforehand. You are the only one who knows what changes you have made.
:arrow_down: ???

2 Likes

ok. thanks!! I’ll try it

I solved it.
I restored the default values and it worked.

Thank you!!!

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.