Similar to Bug-in-done-fish

Was going to reply in:

but found it closed.

$ sleep 11
error: process ID out of range

Usage:
ps [options]

Try ‘ps --help <simple|list|output|threads|misc|all>’
or ‘ps --help <s|l|o|t|m|a>’
for additional help text.

For more details see ps(1).
basename: missing operand
Try ‘basename --help’ for more information.
error: process ID out of range

Usage:
ps [options]

Try ‘ps --help <simple|list|output|threads|misc|all>’
or ‘ps --help <s|l|o|t|m|a>’
for additional help text.

For more details see ps(1).

I am experiencing the same thing., was it ever solved.
A bit of it on foot and more on ansi-term

System:
  Kernel: 6.8.4-hardened1-1-hardened arch: x86_64 bits: 64 compiler: gcc
    v: 13.2.1 clocksource: tsc avail: acpi_pm parameters: pti=on
    page_alloc.shuffle=1 BOOT_IMAGE=/@/boot/vmlinuz-linux-hardened
    root=UUID=5cdaaea7-2d12-4fc9-8004-fda5bae9be22 rw rootflags=subvol=@
    quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
    ibt=off
  Desktop: Hyprland v: 0.38.1 with: docker,waybar tools:
    avail: i3lock,swaylock,xautolock vt: 1 dm: 1: LightDM v: 1.32.0
    note: stopped 2: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: Hewlett-Packard product: HP EliteBook 840 G2
    v: A3009D510203 serial: <superuser required> Chassis: type: 10
    serial: <superuser required>
  Mobo: Hewlett-Packard model: 2216 v: KBC Version 96.56
    serial: <superuser required> part-nu: N0Y03UC#ABU uuid: <superuser required>
    UEFI: Hewlett-Packard v: M71 Ver. 01.09 date: 09/01/2015
CPU:
  Info: model: Intel Core i5-5300U bits: 64 type: MT MCP arch: Broadwell
    gen: core 5 level: v3 note: check built: 2015-18 process: Intel 14nm
    family: 6 model-id: 0x3D (61) stepping: 4 microcode: 0x2F
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
    L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 2295 high: 2296 min/max: 500/2900 scaling:
    driver: intel_cpufreq governor: schedutil cores: 1: 2296 2: 2295 3: 2296
    4: 2295 bogomips: 18367
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel HD Graphics 5500 vendor: Hewlett-Packard ZBook 15u G2
    Mobile Workstation driver: i915 v: kernel arch: Gen-8 process: Intel 14nm
    built: 2014-15 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:1616 class-ID: 0300
  Device-2: Cheng Uei Precision Industry (Foxlink) HP EliteBook integrated
    HD Webcam driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
    mode: 2.0 bus-ID: 2-7:5 chip-ID: 05c8:0374 class-ID: 0e02
  Display: wayland server: X.org v: 1.21.1.12 with: Xwayland v: 23.2.6
    compositor: Hyprland v: 0.38.1 driver: X: loaded: modesetting unloaded: vesa
    alternate: fbdev,intel dri: iris gpu: i915 display-ID: 1
  Monitor-1: eDP-1 model: AU Optronics 0x233e built: 2012 res: 1600x900
    dpi: 132 gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14")
    ratio: 16:9 modes: 1600x900
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast surfaceless: drv: iris wayland: drv: iris x11:
    drv: iris inactive: gbm
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.4-arch1.2
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 5500 (BDW
    GT2) device-ID: 8086:1616 memory: 11.3 GiB unified: yes
  API: Vulkan v: 1.3.279 layers: 10 device: 0 type: integrated-gpu
    name: Intel HD Graphics 5500 (BDW GT2) driver: mesa intel v: 24.0.4-arch1.2
    device-ID: 8086:1616 surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 17.0.6 256 bits) driver: mesa llvmpipe
    v: 24.0.4-arch1.2 (LLVM 17.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
Audio:
  Device-1: Intel Broadwell-U Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c
    class-ID: 0403
  Device-2: Intel Wildcat Point-LP High Definition Audio
    vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:9ca0 class-ID: 0403
  API: ALSA v: k6.8.4-hardened1-1-hardened status: kernel-api tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.4 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I218-LM vendor: Hewlett-Packard driver: e1000e
    v: kernel port: 5080 bus-ID: 00:19.0 chip-ID: 8086:15a2 class-ID: 0200
  IF: enp0s25 state: down mac: <filter>
  Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:095a class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  IF-ID-1: br-b93b60dd9457 state: down mac: <filter>
  IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
  IF-ID-3: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A
    mac: <filter>
  IF-ID-4: vethba31c2b state: up speed: 10000 Mbps duplex: full
    mac: <filter>
  Info: services: NetworkManager, systemd-networkd, systemd-timesyncd,
    wpa_supplicant
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-4:3 chip-ID: 8087:0a2a
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 4 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 4.0 lmp-v: 6
    status: discoverable: yes pairing: yes
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
    v: 3.0 port: 5060 bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
  Local Storage: total: 931.51 GiB used: 443.28 GiB (47.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5400 serial: <filter> fw-rev: RSM7 scheme: GPT
Partition:
  ID-1: / raw-size: 491.68 GiB size: 491.68 GiB (100.00%)
    used: 443.28 GiB (90.2%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 296 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 491.68 GiB size: 491.68 GiB (100.00%)
    used: 443.28 GiB (90.2%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 491.68 GiB size: 491.68 GiB (100.00%)
    used: 443.28 GiB (90.2%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 491.68 GiB size: 491.68 GiB (100.00%)
    used: 443.28 GiB (90.2%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 11.57 GiB used: 212.3 MiB (1.8%)
    priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 49.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 12 GiB available: 11.57 GiB used: 4.18 GiB (36.1%)
  Processes: 245 Power: uptime: 13h 19m states: freeze,mem suspend: deep
    avail: s2idle wakeups: 3 services: upowerd Init: systemd v: 255
    default: graphical tool: systemctl
  Packages: 2702 pm: nix-default pkgs: 0 pm: nix-sys pkgs: 0 pm: nix-usr
    pkgs: 0 pm: pacman pkgs: 2683 libs: 520 tools: aura,pacseek,pamac,paru
    pm: flatpak pkgs: 19 Compilers: clang: 17.0.6 gcc: 13.2.1
    Shell: garuda-inxi default: fish v: 3.7.1 running-in: emacs inxi: 3.3.33
Garuda (2.6.25-1):
  System install date:     2022-01-22
  Last full system update: 2024-04-13
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio
  Windows dual boot:       No/Undetected
  Failed units:            shadow.service systemd-networkd-wait-online.service 

Hmm, looks kind of like this one:

It looks like we are currently shipping 1.19.2 and that one was fixed in 1.19.1–but is it possible you are using an older version still?

Check the your local version:

echo $__done_version
3 Likes

1.16.5

This might sound stupid, but how do I actually upgrade it.

pacman -Ql garuda-fish-config
garuda-fish-config /etc/
garuda-fish-config /etc/skel/
garuda-fish-config /etc/skel/.config/
garuda-fish-config /etc/skel/.config/fish/
garuda-fish-config /etc/skel/.config/fish/conf.d/
garuda-fish-config /etc/skel/.config/fish/conf.d/done.fish
garuda-fish-config /etc/skel/.config/fish/config.fish
garuda-fish-config /etc/skel/.local/
garuda-fish-config /etc/skel/.local/share/
garuda-fish-config /etc/skel/.local/share/fish/
garuda-fish-config /etc/skel/.local/share/fish/fish_history
garuda-fish-config /usr/
garuda-fish-config /usr/lib/
garuda-fish-config /usr/lib/systemd/
garuda-fish-config /usr/lib/systemd/user/
garuda-fish-config /usr/lib/systemd/user/garuda-fish-completions-update.service
garuda-fish-config /usr/share/
garuda-fish-config /usr/share/fish/
garuda-fish-config /usr/share/fish/vendor_conf.d/
garuda-fish-config /usr/share/fish/vendor_conf.d/garuda-update.fish

you can either install

paru -S fish-done

from AUR I guess to auto-update the

~/.config/fish/conf.d/done.fish

file. Or just copy paste the file from

/etc/skel/.config/fish/conf.d
3 Likes

paru -S fish-done
failed,
I did what you suggested from the second

  • I had a file omf.fish, also removed it and added the mocha.fish

is this okay?..
alse echo $_done_version still outputs the old one
I’ll try trigger the failure and see if it self solved then mark as solution

New
Error still persists

You will most likely need to reboot since you are on hyprland. Foot server is what loads all your config for all the foot clients you open. So you need to kill it and restart it to have your changes reflect.

Easy way to do that is to restart.

1 Like

cool, lemme try

Thanks @NaN @BluishHumility , your guides help me learn something and fix something.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.