System:
Kernel: 5.18.10-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=e46fe81f-7dfd-4f6a-a9fb-9cf9d645f98a
rw [email protected] quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=e912bbf4-d5e0-42e1-9d5e-5f0b144b76b4 loglevel=3
Desktop: KDE Plasma v: 5.25.2 tk: Qt v: 5.15.5 wm: kwin_wayland vt: 3 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: OMEN by HP Laptop 16-c0xxx v: N/A serial: <superuser required>
Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 8902 v: 89.55 serial: <superuser required> UEFI: AMI v: F.14 date: 02/11/2022
Battery:
ID-1: BAT0 charge: 70.0 Wh (99.9%) condition: 70.1/70.1 Wh (100.0%) volts: 17.2 min: 15.4
model: HP Primary type: Li-ion serial: <filter> status: N/A cycles: 4
CPU:
Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 gen: 4
built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA50000C
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 3629 high: 4400 min/max: 1200/4462 boost: enabled scaling:
driver: acpi-cpufreq governor: performance cores: 1: 3706 2: 3525 3: 3529 4: 3533 5: 3527
6: 3540 7: 3526 8: 3644 9: 3243 10: 4400 11: 3608 12: 3530 13: 3524 14: 3502 15: 4144 16: 3587
bogomips: 102208
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 23 [Radeon RX 6600/6600 XT/6600M] vendor: Hewlett-Packard driver: amdgpu
v: kernel arch: RDNA 2 process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: none off: DP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:73ff
class-ID: 0380
Device-2: AMD Cezanne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN 5.1
process: TSMC n7 (7nm) built: 2018-21 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s ports: active: eDP-1 empty: DP-2 bus-ID: 09:00.0 chip-ID: 1002:1638
class-ID: 0300
Device-3: Luxvisions Innotech HP Wide Vision HD Camera type: USB driver: uvcvideo
bus-ID: 1-3:3 chip-ID: 30c9:000e class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.2 compositor: kwin_wayland
driver: X: loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa gpu: amdgpu,amdgpu
display-ID: 0
Monitor-1: eDP-1 res: 2560x1440 size: N/A modes: N/A
OpenGL: renderer: AMD RENOIR (LLVM 14.0.6 DRM 3.46 5.18.10-zen1-1-zen) v: 4.6 Mesa 22.1.3
direct render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio vendor: Hewlett-Packard driver: snd_hda_intel
bus-ID: 3-1.3:5 v: kernel pcie: chip-ID: 0763:410b gen: 4 class-ID: fe01 speed: 16 GT/s
lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 09:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel
alternate: snd_pci_acp3x,snd_pci_acp5x,snd_pci_acp6x,snd_acp_pci,snd_sof_amd_renoir pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID
: 09:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-4: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 09:00.6
chip-ID: 1022:15e3 class-ID: 0403
Device-5: M-Audio AIR 192 4 type: USB driver: snd-usb-audio
Sound Server-1: ALSA v: k5.18.10-zen1-1-zen running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: PulseAudio v: 16.1 running: no
Sound Server-4: PipeWire v: 0.3.54 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8852AE 802.11ax PCIe Wireless Network Adapter vendor: Hewlett-Packard
driver: rtw89_8852ae v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0
chip-ID: 10ec:8852 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:4
chip-ID: 0bda:2852 class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 1.84 TiB used: 179.09 GiB (9.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 37.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung model: MZVLB1T0HBLR-000H1 size: 953.87 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: HPS0NEXF temp: 33.9 C scheme: GPT
Partition:
ID-1: / raw-size: 914.67 GiB size: 914.67 GiB (100.00%) used: 179.09 GiB (19.6%) fs: btrfs
dev: /dev/nvme0n1p2 maj-min: 259:3
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 580 KiB (0.2%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:2
ID-3: /home raw-size: 914.67 GiB size: 914.67 GiB (100.00%) used: 179.09 GiB (19.6%) fs: btrfs
dev: /dev/nvme0n1p2 maj-min: 259:3
ID-4: /var/log raw-size: 914.67 GiB size: 914.67 GiB (100.00%) used: 179.09 GiB (19.6%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:3
ID-5: /var/tmp raw-size: 914.67 GiB size: 914.67 GiB (100.00%) used: 179.09 GiB (19.6%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:3
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 14.98 GiB used: 103.8 MiB (0.7%) priority: 100 dev: /dev/zram0
ID-2: swap-2 type: partition size: 16.55 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:4
Sensors:
System Temperatures: cpu: N/A mobo: N/A
Fan Speeds (RPM): cpu: 2401 fan-2: 2211
GPU: device: amdgpu temp: 38.0 C device: amdgpu temp: 39.0 C mem: 40.0 C fan: 0 watts: 4.00
Info:
Processes: 390 Uptime: 35m wakeups: 2 Memory: 14.98 GiB used: 5.24 GiB (35.0%) Init: systemd
v: 251 default: graphical tool: systemctl Compilers: gcc: 12.1.0 clang: 14.0.6 Packages:
pacman: 2387 lib: 577 Client: shell wrapper v: 5.1.16-release inxi: 3.3.19
Garuda (2.6.4.r1.g3842242-1):
System install date: 2022-04-07
Last full system update: 2022-07-10
Is partially upgraded: Yes
Relevant software: NetworkManager
Windows dual boot: Probably (Run as root to verify)
Snapshots: Snapper
Failed units:
Hello,
after all this updates , kde-plasma seems to be clunky. Some Windows have not titel bar with buttons, Windows placement is not correct etc.
In the past, I had reset kde-plasma to default, where I delete all files in .kde/share/config/plasma*. But this files not exist in this distrubution.
Which files I need to delete, to reset kde-plasma to default?
I remove latte, because i don't like it.
THX