Random device logout

Hello Good people, my device is just randomly logging me out of my session. So at first I thought it was because of something that I did, but then I reloaded my earliest snapshot but it still persists, what could be the problem?
I also reset my configs.

It restarted itself and displayed this!
Processing: 16457659595688687021001821225505.jpg...

System:
Kernel: 5.15.25-1-lts x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=c9eb3dd0-2491-4235-9bb3-c5a860d57d06 rw rootflags=subvol=@
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
Desktop: Xfce 4.16.0 tk: Gtk 3.24.29 info: xfce4-panel wm: xfwm 4.16.1
vt: 7 dm: LightDM 1.30.0 Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 80G0 v: Lenovo G50-30
serial: Chassis: type: 10 v: Lenovo G50-30
serial:
Mobo: LENOVO model: Lancer 5A6 v: SDK0F82990WIN
serial: UEFI: LENOVO v: A7CN40WW date: 07/18/2014
Battery:
ID-1: BAT0 charge: 9.1 Wh (98.9%) condition: 9.2/28.5 Wh (32.1%)
volts: 16.3 min: 14.4 model: Lenovo type: Unknown serial:
status: Charging
CPU:
Info: model: Intel Pentium N3540 bits: 64 type: MCP arch: Silvermont
family: 6 model-id: 0x37 (55) stepping: 8 microcode: 0x838
Topology: cpus: 1x cores: 4 smt: cache: L1: 224 KiB
desc: d-4x24 KiB; i-4x32 KiB L2: 2 MiB desc: 2x1024 KiB
Speed (MHz): avg: 2500 high: 2628 min/max: 500/2666 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 2483 2: 2329 3: 2563
4: 2628 bogomips: 17333
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Not affected
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
vendor: Lenovo driver: i915 v: kernel ports: active: eDP-1
empty: DP-1,HDMI-A-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0f31
class-ID: 0300
Device-2: Acer Lenovo EasyCamera type: USB driver: uvcvideo
bus-ID: 1-4.1:4 chip-ID: 5986:055d class-ID: 0e02 serial:
Display: x11 server: X.Org v: 1.21.1.3 compositor: xfwm v: 4.16.1 driver:
X: loaded: intel unloaded: modesetting alternate: fbdev,vesa gpu: i915
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: eDP1 mapped: eDP-1 model: BOE Display built: 2015
res: 1366x768 hz: 60 dpi: 102 gamma: 1.2 size: 340x190mm (13.4x7.5")
diag: 395mm (15.5") ratio: 16:9 modes: 1366x768
Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio
vendor: Lenovo driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:0f04 class-ID: 0403
Sound Server-1: ALSA v: k5.15.25-1-lts running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.47 running: yes
Network:
Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:08b4 class-ID: 0280
IF: wlp2s0 state: up mac:
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 1000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: down mac:
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 1-4.3:6 chip-ID: 8087:07dc class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 1 state: down
bt-service: enabled,running rfk-block: hardware: no software: yes
address:
Drives:
Local Storage: total: 465.76 GiB used: 33.25 GiB (7.1%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD5000LPCX-24C6HT0 size: 465.76 GiB block-size: physical: 4096 B
logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial:
rev: 1A02 scheme: GPT
Partition:
ID-1: / raw-size: 70.09 GiB size: 70.09 GiB (100.00%)
used: 33.22 GiB (47.4%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
used: 30.1 MiB (11.8%) fs: vfat dev: /dev/sda2 maj-min: 8:2
ID-3: /home raw-size: 70.09 GiB size: 70.09 GiB (100.00%)
used: 33.22 GiB (47.4%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
ID-4: /var/log raw-size: 70.09 GiB size: 70.09 GiB (100.00%)
used: 33.22 GiB (47.4%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
ID-5: /var/tmp raw-size: 70.09 GiB size: 70.09 GiB (100.00%)
used: 33.22 GiB (47.4%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 3.72 GiB used: 2.7 GiB (72.7%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 59.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 248 Uptime: 1h 48m wakeups: 1 Memory: 3.72 GiB
used: 3.24 GiB (87.3%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.2.0 clang: 13.0.1 Packages: 1341 pacman: 1322 lib: 348 flatpak: 0
snap: 19 Shell: Bash v: 5.1.16 running-in: kitty inxi: 3.3.13

From your previous posts our forum:

You have opened 3 different requests on the forum and not once have you included your garuda-inxi output, (as text). I have already warned you once before that if you didn’t include your system specs on your help request your thread was likely to be trash binned.

We also prefer that outputs, errors, and logs be posted as text (not pictures).

If you do not want to conform to our forums rules your help requests will end up being repeatedly binned,

Please start including some pertinent information of actual use when you request assistance in the future.

2 Likes