Ralink RT2870/RT3070 - wifi adaptor does not work after rebooting

Issues & Assistance Networking Support
26

I run that code but it says it cant find device

mahdi2421@mahdi2421 in ~ as 馃 took 24s
位 bash -c "nmcli networking off; sudo systemctl stop NetworkManager; sudo ip link set wlp1s0f0u1 down; sleep 1; sudo modprobe -r rt2800usb; sleep 3; sudo modprobe rt2800usb; sleep 1; sudo ip link set wlp1s0f0u1 up; sleep 1; sudo systemctl start NetworkManager; nmcli networking on; sleep 1; nmcli r wifi off; sleep 1; nmcli r wifi on"

Cannot find device "wlp1s0f0u1"
Cannot find device "wlp1s0f0u1"

mahdi2421@mahdi2421 in ~ as 馃 took 20s
位 bash -c "nmcli networking off; sudo systemctl stop NetworkManager; sudo ip link set wlp1s0f0u1 down; sleep 1; sudo rmmod asus_wmi;  sleep 1; sudo modprobe -r rt2800usb; sleep 3; sudo modprobe rt2800usb; sleep 1; sudo ip link set wlp1s0f0u1 up; sleep 1; sudo systemctl start NetworkManager;   sleep 1; nmcli networking on; sleep1; nmcli r wifi off; sleep 1; nmcli r wifi on"

Cannot find device "wlp1s0f0u1"
rmmod: ERROR: Module asus_wmi is in use by: eeepc_wmi
Cannot find device "wlp1s0f0u1"

then I ran ip a s command on terminal and it shows this

mahdi2421@mahdi2421 in ~ as 馃 took 22s
位 ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
valid_lft forever preferred_lft forever
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether 0c:9d:92:12:15:15 brd ff:ff:ff:ff:ff:ff
7: wlp1s0f0u13: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether f4:3e:61:65:79:3b brd ff:ff:ff:ff:ff:ff

As you see my device name is wlp1s0f0u13 and I ran edit command for it and ran .

mahdi2421@mahdi2421 in ~ as 馃 took 19s
位 bash -c "nmcli networking off; sudo systemctl stop NetworkManager; sudo ip link set wlp1s0f0u13 down; sleep1; sudo modprobe -r rt2800usb; sleep 3; sudo modprobe rt2800usb; sleep 1; sudo ip link set wlp1s0f0u13 up; sleep 1; sudo systemctl start NetworkManager; nmcli networking on; sleep 1; nmcli r wifi off; sleep 1; nmcli r wifi on"

mahdi2421@mahdi2421 in ~ as 馃 took 20s
位 bash -c "nmcli networking off; sudo systemctl stop NetworkManager; sudo ip link set wlp1s0f0u13 down; sleep1; sudo rmmod asus_wmi;  sleep 1; sudo modprobe -r rt2800usb; sleep 3; sudo modprobe rt2800usb; sleep 1; sudoip link set wlp1s0f0u13 up; sleep 1; sudo systemctl start NetworkManager;   sleep 1; nmcli networking on; sleep 1; nmcli r wifi off; sleep 1; nmcli r wifi on"


rmmod: ERROR: Module asus_wmi is in use by: eeepc_wmi

how can I fix the last error ?