Qtile Garuda Start button Web Browser Link

I got the keybind changed from Firefox to brave. But when I click on the Garuda start button on the top left it says web browser. I'd like to change that to open with brave. I haven't found anything in the configs I've looked at. How do I change or where should I look to change in the configs?

System:
  Kernel: 6.2.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=fa837f01-80e4-419e-8c71-7c53f379113f rw rootflags=subvol=@
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3
  Desktop: Qtile v: 0.22.1 wm: LG3D vt: 1 dm: SDDM Distro: Garuda Linux
    base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP Notebook v: Type1ProductConfigId
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 81EB v: 61.28 serial: <superuser required> UEFI: Insyde
    v: F.09 date: 05/19/2016
Battery:
  ID-1: BAT1 charge: 0% condition: 16.7/31.1 Wh (53.9%) volts: 3.8 min: 10.9
    model: Hewlett-Packard PABAS0241231 type: Li-ion serial: <filter>
    status: not charging
CPU:
  Info: model: Intel Core i3-6100U bits: 64 type: MT MCP arch: Skylake
    gen: core 6 level: v3 note: check built: 2015 process: Intel 14nm family: 6
    model-id: 0x4E (78) stepping: 3 microcode: 0xF0
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
    L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1175 high: 2300 min/max: 400/2300 scaling:
    driver: intel_pstate governor: powersave cores: 1: 2300 2: 800 3: 800 4: 800
    bogomips: 18399
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Hewlett-Packard
    driver: i915 v: kernel arch: Gen-9 process: Intel 14n built: 2015-16 ports:
    active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0
    chip-ID: 8086:1916 class-ID: 0300
  Device-2: Chicony HP Webcam type: USB driver: uvcvideo bus-ID: 1-5:3
    chip-ID: 04f2:b52d class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.7 compositor: Picom v: git-c4107
    driver: X: loaded: modesetting alternate: fbdev,intel,vesa dri: iris
    gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: BOE Display 0x06a4 built: 2015 res: 1366x768
    hz: 60 dpi: 101 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
    ratio: 16:9 modes: 1366x768
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
    missing.
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_soc_avs
    bus-ID: 00:1f.3 chip-ID: 8086:9d70 class-ID: 0403
  Sound API: ALSA v: k6.2.8-zen1-1-zen running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.67 running: yes
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Hewlett-Packard
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 4000
    bus-ID: 01:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: enp1s0 state: down mac: <filter>
  Device-2: Realtek RTL8188EE Wireless Network Adapter
    vendor: Hewlett-Packard driver: rtl8188ee v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8179
    class-ID: 0280
  IF: wlo1 state: up mac: <filter>
Drives:
  Local Storage: total: 931.51 GiB used: 5.53 GiB (0.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD10JPVX-60JC3T0 size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: 1A01 scheme: GPT
Partition:
  ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 5.53 GiB (0.6%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 608 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 5.53 GiB (0.6%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)

c0wb0y54mur41, [3/24/2023 8:21 PM]
used: 5.53 GiB (0.6%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 5.53 GiB (0.6%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 3.72 GiB used: 23.2 MiB (0.6%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 40.0 C pch: 37.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 176 Uptime: 3h 35m wakeups: 1 Memory: 3.72 GiB
  used: 1.42 GiB (38.1%) Init: systemd v: 253 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1097
  libs: 308 tools: pamac,paru pm: appimage pkgs: 0 Shell: fish v: 3.6.0
  default: Bash v: 5.1.16 running-in: alacritty inxi: 3.3.25
Garuda (2.6.16-1):
  System install date:     2023-03-24
  Last full system update: 2023-03-24
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:

Those are set up in the jgmenu config.

micro ~/.config/jgmenu/prepend.csv

Change the second value on the first line to whatever browser you would like to open when you click the jgmenu shortcut.

If you'd like, change the first value to re-name the shortcut to something else.

6 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.