Qsb executable not found

Garuda inxi:

❯ garuda-inxi
System:
Kernel: 5.16.10-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=a367fbf7-8c5c-44e7-975c-b5e9155cebdf rw [email protected]
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3
Desktop: KDE Plasma 5.24.2 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: B450M PRO-VDH PLUS (MS-7A38) v: 7.0
serial: <superuser required> UEFI-[Legacy]: American Megatrends v: 9.00
date: 01/07/2019
CPU:
Info: model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+
family: 0x17 (23) model-id: 8 stepping: 2 microcode: 0x800820D
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 576 KiB desc: d-6x32 KiB; i-6x64 KiB L2: 3 MiB desc: 6x512 KiB
L3: 16 MiB desc: 2x8 MiB
Speed (MHz): avg: 2896 high: 3733 min/max: 1550/3400 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 2638 2: 2943
3: 2645 4: 3615 5: 3165 6: 3733 7: 2774 8: 2675 9: 2848 10: 2330 11: 2436
12: 2950 bogomips: 81587
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Gigabyte driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 ports: active: DP-2,DP-3,HDMI-A-1 empty: DP-1,DVI-D-1
bus-ID: 1f:00.0 chip-ID: 1002:67df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
loaded: amdgpu,ati unloaded: modesetting,vesa alternate: fbdev gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1800 s-dpi: 96 s-size: 1013x475mm (39.9x18.7")
s-diag: 1119mm (44")
Monitor-1: DisplayPort-1 mapped: DP-2 pos: bottom-c
model: Samsung C27R50x serial: <filter> built: 2018 res: 1920x1080 hz: 72
dpi: 82 gamma: 1.2 size: 598x336mm (23.5x13.2") diag: 686mm (27")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-2: DisplayPort-2 mapped: DP-3 pos: primary,bottom-l
model: Asus VG248 serial: <filter> built: 2018 res: 1920x1080 dpi: 92
gamma: 1.2 size: 531x299mm (20.9x11.8") diag: 609mm (24") ratio: 16:9
modes: max: 1920x1080 min: 720x400
Monitor-3: HDMI-A-0 mapped: HDMI-A-1 pos: top-right model: Philips FTV
serial: <filter> built: 1990 res: 1280x720 dpi: 68 gamma: 1.2
size: 480x360mm (18.9x14.2") diag: 734mm (28.9") ratio: 16:9 modes:
max: 1024x768 min: 640x480
OpenGL: renderer: AMD Radeon RX 580 Series (POLARIS10 DRM 3.44.0
5.16.10-zen1-1-zen LLVM 13.0.1)
v: 4.6 Mesa 21.3.6 direct render: Yes
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Gigabyte driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 1f:00.1 chip-ID: 1002:aaf0 class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 21:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-3: JMTek LLC. USB PnP Audio Device type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-3:2 chip-ID: 0c76:161e
class-ID: 0300
Device-4: JMTek LLC. USB PnP Audio Device type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-6:3 chip-ID: 0c76:161f
class-ID: 0300
Sound Server-1: ALSA v: k5.16.10-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.47 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 1b:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp27s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: docker0 state: down mac: <filter>
Drives:
Local Storage: total: 3.42 TiB used: 741.48 GiB (21.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Patriot model: Viper M.2 VPN100
size: 476.94 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: ECFM22.7
temp: 30.9 C scheme: MBR
ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT250MX500SSD1
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 023 scheme: MBR
ID-3: /dev/sdb maj-min: 8:16 vendor: Toshiba model: DT01ACA100
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST2000DM008-2FR102
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 359.75 GiB size: 359.75 GiB (100.00%)
used: 184.18 GiB (51.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /home raw-size: 359.75 GiB size: 359.75 GiB (100.00%)
used: 184.18 GiB (51.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-3: /var/log raw-size: 359.75 GiB size: 359.75 GiB (100.00%)
used: 184.18 GiB (51.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/tmp raw-size: 359.75 GiB size: 359.75 GiB (100.00%)
used: 184.18 GiB (51.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.64 GiB used: 1.82 GiB (11.6%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 53.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 736
Info:
Processes: 392 Uptime: 29m wakeups: 0 Memory: 15.64 GiB
used: 3.86 GiB (24.7%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.2.0 clang: 13.0.1 Packages: apt: 0 pacman: 1842 lib: 495
Shell: fish v: 3.3.1 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.13
Garuda (2.5.5-1):
System install date:     2021-10-24
Last full system update: 2022-02-23
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       <superuser required>
Snapshots:               Snapper
Failed units:            bluetooth-autoconnect.service mozillavpn.service

I am trying to build the mozilla-vpn-client from source using qt6, since building it with qt5 or using the executable from AUR since I just get a segfault.

In the process of building a mozilla provided command runs the qsb executable, which isn't present on my system although I ran sudo pacman -S qt6-base qt6-tools qt6-networkauth qt6-charts qt6-websockets qt6-shadertools.
From my point of view the qsb executable is in the qt6-shadertools package, since konsole tries to install that package when qsb isn't found.

I have searched a lot but I cannot find an answer to this problem.

It should be there. Look at the package contents here
https://archlinux.org/packages/extra/x86_64/qt6-shadertools/

4 Likes

Ah, seems like it just wasn't on PATH for some reason. Thanks!

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.