Proton Pass Copy/Paste Not Working

[Iron3eagle]

Hello,

I’m attempting to solve an issue with Proton Pass on Garuda. Frankly I’m not sure if it’s an application issue or OS one. I’ll reach out to Proton if there’s nothing I’m missing on the OS side.

When running Proton Pass desktop application you can click on field and it copies the content to the clipboard. The plugin on Brave works fine, but not so much on the desktop application.

I’ve confirmed checking the clipboard isn’t receiving the data by checking the history and also confirmed there is no auto clear of the clipboard currently turned on in the desktop application.

Any guidance would be appreciated.

System:
Kernel: 6.12.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=1e57882b-3332-48c9-830b-905e17336563 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.2.5 tk: Qt v: N/A info: frameworks v: 6.10.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: G22CH v: 1.0 serial: <superuser required>
uuid: <superuser required> UEFI: ASUSTeK (Licensed by AMI LLC.) v: G22CH.411
date: 08/07/2024
CPU:
Info: model: 13th Gen Intel Core i7-13700F bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1
microcode: 0x12B
Topology: cpus: 1x dies: 1 clusters: 10 cores: 16 threads: 24 mt: 8 tpc: 2
st: 8 smt: enabled cache: L1: 1.4 MiB desc: d-8x32 KiB, 8x48 KiB; i-8x32
KiB, 8x64 KiB L2: 24 MiB desc: 8x2 MiB, 2x4 MiB L3: 30 MiB desc: 1x30 MiB
Speed (MHz): avg: 800 min/max: 800/5100:5200:4100 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800
5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800 14: 800
15: 800 16: 800 17: 800 18: 800 19: 800 20: 800 21: 800 22: 800 23: 800
24: 800 bogomips: 101376
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: ASUSTeK driver: nvidia
v: 565.77 alternate: nouveau,nvidia_drm non-free: 550/565.xx+
status: current (as of 2025-01) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 16
ports: active: none off: DP-1,DP-3,HDMI-A-1 empty: DP-2 bus-ID: 01:00.0
chip-ID: 10de:2786 class-ID: 0300
Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.4
compositor: kwin_wayland driver: X: loaded: nvidia
unloaded: modesetting,nouveau alternate: fbdev,nv,vesa
gpu: nvidia,nvidia-nvswitch d-rect: 7680x1440 display-ID: 0
Monitor-1: DP-1 pos: right model: ViewSonic VX2776-4K-mhd serial: <filter>
built: 2020 res: mode: 2560x1440 hz: 60 scale: 150% (1.5) to: 1707x960
dpi: 160 gamma: 1.2 size: 608x355mm (23.94x13.98") diag: 704mm (27.7")
ratio: 15:9 modes: max: 3840x2160 min: 640x480
Monitor-2: DP-3 pos: center model: AOC Q27G3XMN serial: <filter>
built: 2024 res: mode: 2560x1440 hz: 165 scale: 150% (1.5) to: 1707x960
dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 640x480
Monitor-3: HDMI-A-1 pos: primary,left model: ViewSonic VX2776-4K-mhd
serial: <filter> built: 2020 res: mode: 2560x1440 hz: 60 scale: 150% (1.5)
to: 1707x960 dpi: 160 gamma: 1.2 size: 608x355mm (23.94x13.98")
diag: 704mm (27.7") ratio: 15:9 modes: max: 3840x2160 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia gbm:
drv: nvidia surfaceless: drv: nvidia wayland: drv: nvidia x11: drv: nvidia
API: OpenGL v: 4.6.0 vendor: nvidia v: 565.77 glx-v: 1.4
direct-render: yes renderer: NVIDIA GeForce RTX 4070/PCIe/SSE2
memory: 11.71 GiB display-ID: :1.0
API: Vulkan v: 1.4.303 layers: 15 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 4070 driver: N/A device-ID: 10de:2786
surfaces: xcb,xlib,wayland device: 1 type: cpu name: llvmpipe (LLVM
19.1.6 256 bits) driver: N/A device-ID: 10005:0000
surfaces: xcb,xlib,wayland
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: corectrl, nvidia-settings,
nvidia-smi wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Raptor Lake High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403
Device-2: NVIDIA AD104 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-3: Corsair HS80 RGB USB Gaming Headset
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-4.3.3:11 chip-ID: 1b1c:0a88 class-ID: 0300
API: ALSA v: k6.12.9-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Raptor Lake-S PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:7a70 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 05:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp5s0 state: up speed: 2500 Mbps duplex: full mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:9 chip-ID: 8087:0033
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
lmp-v: 12 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
Local Storage: total: 31.91 TiB used: 13.76 TiB (43.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WD BLACK SN850X 4000GB size: 3.64 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 624331WD temp: 44.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:2 vendor: Micron model: 2400 MTFDKBA1T0QFM
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: V3MA003 temp: 38.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: HGST (Hitachi) model: HUH721010ALE604
size: 18.19 TiB block-size: physical: 4096 B logical: 512 B type: USB
rev: 3.2 spd: 10 Gb/s lanes: 1 mode: 3.2 gen-2x1 tech: HDD rpm: 7200
serial: <filter> scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD100EMAZ-00WJTA0 size: 9.1 TiB block-size: physical: 4096 B
logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0
tech: HDD rpm: 5400 serial: <filter> fw-rev: 3004 scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Kingston model: DataTraveler 2.0
size: 58.61 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
fw-rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 118.56 GiB (12.4%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:4
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 584 KiB (0.2%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:3
ID-3: /home raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 118.56 GiB (12.4%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:4
ID-4: /var/log raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 118.56 GiB (12.4%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:4
ID-5: /var/tmp raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 118.56 GiB (12.4%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:4
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 62.6 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 24
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 50.8 C mobo: N/A
Fan Speeds (rpm): cpu: 800
Info:
Memory: total: 64 GiB available: 62.6 GiB used: 6.63 GiB (10.6%)
Processes: 552 Power: uptime: 26m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 24.99 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: 1916 pm: pacman pkgs: 1903 libs: 549 tools: octopi,paru
pm: flatpak pkgs: 13 Compilers: clang: 19.1.6 gcc: 14.2.1 Shell: garuda-inxi
default: fish v: 3.7.1 running-in: konsole inxi: 3.3.37
Garuda (2.6.26-1.1):
System install date:     2025-01-16
Last full system update: 2025-01-22 ↻
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       No/Undetected
Failed units:

[nepti]

Welcome to the forum.

@Iron3eagle

Kernel: 6.12.9-zen1-1-zen

@Iron3eagle

System install date:     2025-01-16
Last full system update: 2025-01-22 ↻

Please reboot and try again.

[Iron3eagle]

Reboot completed. Same result. It may indeed be an application issue as I do see issues in the rating/review section of the Flatpak store. Which I do realize isn’t technically supported, but a vast majority of application have functioned thus far.

At one point I did see Garuda requesting for permission to be granted for copy/paste in another context (that being copying from Brave to a Steam game running on Proton [not related to Proton Pass]). So I wasn’t sure if I got that in this instance and missed it some how.

Should I try installing a version from another location? I did see an Arch distro on Snapcraft (never used it before) but don’t want to load up on distribution services. I’ve also been skeptical of the AUR option especially for a password manager.

[SGS]

What exactly did you copy and where you want to paste in Garuda?

It works fine here to copy

and paste in Firedragon and Joplin.
Same from this icon

@Iron3eagle

I do see issues in the rating/review section of the Flatpak store

Ähm, I just use https://mail.proton.me and from there you can open all the tools you need.

[Iron3eagle]

I created a quick screencast to show the issue. I may just resort to the Brave Plugin or Web App as you’ve suggested.

Link removed

[SGS]

I do not open links
We do not support Proton or Brave, just check with Firedragon.

[Iron3eagle]

Completely understand! Was trying my best to demonstrate what I was seeing

I’ll stick to the web app and plugin until the desktop app is worked out on their end.

Thank you for the help and loving the OS so far.

[nepti]

@Iron3eagle

wm: kwin_wayland

@Iron3eagle

Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.4
compositor: kwin_wayland

I tested it in a VM (flatpak version), in an x11 session it works if you click on the “copy to clipboard” button - looks like the app is not working properly with wayland. Switch to an x11 session and test whether it works there.

[elite]

Its cause it uses old electron. Honestly better to make all the main ones you use into web apps with something like. AUR (en) - webapp-manager then it just acts like a app an you never have to think about it again.