Nemo does not count files

[Squid]

I was a few days ago in another dist with cinnamon and nemo, in that one it displayed below folder names like (78 files), but no matter what setting i change in nemo preferences, it refuses to show the count.

Any idea how to get it visible?

System:
Kernel: 6.12.4-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=3df21139-cd5f-45f6-8063-226d3de4acff rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: Cinnamon v: 6.4.2 tk: GTK v: 3.24.43 wm: Muffin v: 6.4.1 tools:
avail: cinnamon-screensaver,xautolock vt: 7 dm: LightDM v: 1.32.0
Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial:
Mobo: ASUSTeK model: TUF GAMING B650-PLUS v: Rev 1.xx
serial: part-nu: SKU uuid:
UEFI: American Megatrends v: 3057 date: 10/29/2024
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse MX Master 2S
serial: charge: 55% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: AMD Ryzen 7 7800X3D bits: 64 type: MT MCP arch: Zen 4 gen: 4
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601209
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 8 MiB
desc: 8x1024 KiB L3: 96 MiB desc: 1x96 MiB
Speed (MHz): avg: 4750 min/max: 545/5050 boost: enabled scaling:
driver: amd-pstate-epp governor: performance cores: 1: 4750 2: 4750 3: 4750
4: 4750 5: 4750 6: 4750 7: 4750 8: 4750 9: 4750 10: 4750 11: 4750 12: 4750
13: 4750 14: 4750 15: 4750 16: 4750 bogomips: 134141
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 32 [Radeon RX 7700 XT /
7800 XT] vendor: Sapphire driver: amdgpu v: kernel arch: RDNA-3
code: Navi-3x process: TSMC n5 (5nm) built: 2022+ pcie: gen: 4
speed: 16 GT/s lanes: 16 ports: active: DP-1, DP-2, HDMI-A-1, HDMI-A-2
empty: Writeback-1 bus-ID: 03:00.0 chip-ID: 1002:747e class-ID: 0300
Display: x11 server: [X.Org](http://X.Org) v: 21.1.15 with: Xwayland v: 24.1.4 driver: X:
loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 8192x4464 s-dpi: 108 s-size: 1927x1050mm (75.87x41.34")
s-diag: 2194mm (86.4")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: bottom-l model: Dell U2724D
serial: built: 2024 res: 4096x2304 dpi: 174 gamma: 1.2
size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes:
max: 2560x1440 min: 720x400
Monitor-2: DP-2 mapped: DisplayPort-1 pos: primary,bottom-r
model: Dell U2724D serial: built: 2024 res: 4096x2304 dpi: 174
gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9
modes: max: 2560x1440 min: 720x400
Monitor-3: HDMI-A-1 mapped: HDMI-A-0 pos: top-right model: AOC 27G2G4
serial: built: 2020 res: 3840x2160 dpi: 163 gamma: 1.2
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-4: HDMI-A-2 mapped: HDMI-A-1 pos: top-center model: AOC 27G2G4
serial: built: 2020 res: 3840x2160 dpi: 163 gamma: 1.2
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.3.1-arch1.3
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 7800 XT (radeonsi
navi32 LLVM 18.1.8 DRM 3.59 6.12.4-zen1-1-zen) device-ID: 1002:747e
memory: 15.62 GiB unified: no
API: Vulkan v: 1.4.303 layers: 8 device: 0 type: discrete-gpu name: AMD
Radeon RX 7800 XT (RADV NAVI32) driver: N/A device-ID: 1002:747e
surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 18.1.8 256
bits) driver: N/A device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 31 HDMI/DP Audio
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 03:00.1 chip-ID: 1002:ab30 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 70:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.12.4-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 6b:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: eno1 state: up speed: 2500 Mbps duplex: full mac:
IF-ID-1: tailscale0 state: unknown speed: -1 duplex: full mac: N/A
Info: services: NetworkManager, smbd, systemd-timesyncd
Bluetooth:
Device-1: ASUSTek ASUS USB-BT500 driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-12:3 chip-ID: 0b05:190e
class-ID: e001 serial:
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: bt-v: 5.1
lmp-v: 10 status: discoverable: no pairing: no class-ID: 6c0104
RAID:
Hardware-1: Advanced Micro Devices [AMD] Device driver: ahci v: 3.0
port: N/A bus-ID: 6e:00.0 chip-ID: 1022:43bd rev: N/A class-ID: 0104
Drives:
Local Storage: total: 5.55 TiB used: 319.52 GiB (5.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SKC3000D2048G
size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: fw-rev: EIFK31.6 temp: 42.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Kingston model: SKC3000D2048G
size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: fw-rev: EIFK31.6 temp: 39.9 C
ID-3: /dev/nvme2n1 maj-min: 259:4 vendor: Western Digital
model: WD BLACK SN850X 2000GB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial:
fw-rev: 620361WD temp: 51.9 C
Partition:
ID-1: / raw-size: 1.86 TiB size: 5.55 TiB (297.69%) used: 319.52 GiB (5.6%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 584 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 1.86 TiB size: 5.55 TiB (297.69%)
used: 319.52 GiB (5.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 1.86 TiB size: 5.55 TiB (297.69%)
used: 319.52 GiB (5.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 1.86 TiB size: 5.55 TiB (297.69%)
used: 319.52 GiB (5.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 62.44 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 16
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 54.1 C mobo: 39.2 C gpu: amdgpu temp: 60.0 C
mem: 56.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 577
Info:SSSasss
Memory: total: 64 GiB available: 62.44 GiB used: 8.64 GiB (13.8%)
Processes: 462 Power: uptime: 11m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 24.96 GiB services: csd-power,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1714 libs: 485 tools: octopi,pacseek,paru
Compilers: gcc: 14.2.1 Shell: garuda-inxi default: Bash v: 5.2.37
running-in: guake inxi: 3.3.36
Garuda (2.6.26-1):
System install date: 2024-12-18
Last full system update: 2024-12-20
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units:

[SGS]

We are not responsible for Nemo.

Can you post a comparison photo?

Or is that what you mean?
The detail

Did you read the manual ?

[elite]

i don’t use nemo but maybe click here.

[filo]

Can you check what happens if you go in the Display option instead of Preview?
You should (but I also don’t use nemo) have an option Size. If so, try it.

PS: I took the chance to download and check the Garuda Cinnamon edition. Nice, old memories
Probably what you are missing (but this is set by default in the ISO file) is simply View → Status bar, which toggles on and off the bar at bottom of the screen, always showing file count and free space!