Need help with systemctl enable --now fstrim.timer

Issues & Assistance Lxqt
1 
 
 ╰─λ garuda-inxi
System:
  Kernel: 6.1.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=0590fe61-9088-453a-9aca-ad0cc0dced40 rw [email protected]
    quiet
    cryptdevice=UUID=b7641313-1009-4b60-bb53-29da5479d641:luks-b7641313-1009-4b60-bb53-29da5479d641
    root=/dev/mapper/luks-b7641313-1009-4b60-bb53-29da5479d641 quiet splash
    rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3 ibt=off
  Desktop: LXQt v: 1.2.1 tk: Qt v: 5.15.8 info: cairo-dock, lxqt-panel
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: PRIME Z490-A v: Rev 1.xx serial: <superuser required>
    UEFI: American Megatrends v: 2601 date: 05/17/2022
CPU:
  Info: model: Intel Core i7-10700K bits: 64 type: MT MCP arch: Comet Lake
    gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
    model-id: 0xA5 (165) stepping: 5 microcode: 0xF4
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 4398 high: 4903 min/max: 800/5100 scaling:
    driver: intel_pstate governor: performance cores: 1: 4901 2: 3800 3: 4684
    4: 4902 5: 4899 6: 4903 7: 3800 8: 4743 9: 4892 10: 3800 11: 1747 12: 4807
    13: 4892 14: 4902 15: 4900 16: 3800 bogomips: 121596
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
    process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: HDMI-A-1 empty: DP-1, DP-2, DVI-D-1, HDMI-A-2
    bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300 temp: 53.0 C
  Display: x11 server: X.Org v: 21.1.6 with: Xwayland v: 22.1.7
    compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting
    alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
    s-diag: 777mm (30.58")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: AOC Q32G1WG4 serial: <filter>
    built: 2019 res: 2560x1440 dpi: 93 gamma: 1.2 size: 697x393mm (27.44x15.47")
    diag: 800mm (31.5") ratio: 16:9 modes: max: 2560x1440 min: 720x400
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
    missing.
Audio:
  Device-1: Intel Comet Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:06c8 class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0 class-ID: 0403
  Sound API: ALSA v: k6.1.8-zen1-1-zen running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel pcie:
    gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 04:00.0 chip-ID: 8086:15f3
    class-ID: 0200
  IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 3.18 TiB used: 15.33 GiB (0.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
    model: WDS250G2B0C-00PXH0 size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 211070WD temp: 34.9 C
  ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung
    model: SSD 970 EVO Plus 250GB size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 41.9 C scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD130 size: 2.73 TiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
    rpm: 7200 serial: <filter> rev: ACF0 scheme: GPT
Partition:
  ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 15.33 GiB (6.6%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-b7641313-1009-4b60-bb53-29da5479d641
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 752 KiB (0.2%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:2
  ID-3: /home raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 15.33 GiB (6.6%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-b7641313-1009-4b60-bb53-29da5479d641
  ID-4: /var/log raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 15.33 GiB (6.6%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-b7641313-1009-4b60-bb53-29da5479d641
  ID-5: /var/tmp raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 15.33 GiB (6.6%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-b7641313-1009-4b60-bb53-29da5479d641
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 50.0 C mobo: N/A gpu: amdgpu temp: 53.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1207
Info:
  Processes: 362 Uptime: 1h 12m wakeups: 0 Memory: 31.25 GiB
  used: 3.99 GiB (12.8%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
  pkgs: 1364 libs: 341 tools: gnome-software,octopi,pamac,paru Shell: fish
  v: 3.6.0 running-in: qterminal inxi: 3.3.24
Garuda (2.6.14-1):
  System install date:     2023-01-30
  Last full system update: 2023-02-01
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio
  Windows dual boot:       No/Undetected

I'm confused about this and need help.

I looked online and even visited YouTube.

2

Please do not post pictures of terminal outputs. This is our forum's policy, (unless there is absolutely no other method to post this info). Press the pencil icon below your Original Post (OP), and remove the picture and replace it with the proper textual output.

Have you considered the use of luks as the root of your issue:

Enable periodic TRIM - including on a LUKS partition - Tech Knowledge Base - jaytaala.com Confluence

https://wiki.archlinux.org/title/Dm-crypt/Specialties#Discard/TRIM_support_for_solid_state_drives_(SSD)

2 Likes
3

Please... just copy paste.
Pictures of terminal make no sense unless there's some UI glitch to show, or it's impossible to post otherwise.

the discard operation is not supported

I guess... the discard operation is not supported.

From fstrim.service:

/usr/bin/fstrim --listed-in /etc/fstab:/proc/self/mountinfo --verbose --quiet-unsupported

From man fstrim:

       --quiet-unsupported
           Suppress error messages if trim operation (ioctl) is unsupported. This option is meant to be used in systemd service file or in cron(8) scripts to hide warnings that are result
           of known problems, such as NTFS driver reporting Bad file descriptor when device is mounted read-only, or lack of file system support for ioctl FITRIM call. This option also
           cleans exit status when unsupported filesystem specified on fstrim command line.

The timer is correctly enabled, but see here: Discard/TRIM_support_for_solid_state_drives_(SSD)

edit: LOL, I didn't see the above post.

3 Likes
4

I do understand what transpired, yes.

I wanted to experiment with encryption mode this time.
sorry

5

No problem. After all, we run Linux also because we like to experiment.
And I like to look into these issues because I learn something in the process.

1 Like
6

Although I greatly appreciate your nice sentiments, I really need your assistance in installing AMD drivers. Here is a picture, although I'm not sure.\

f
f1483×692 48.5 KB

7

I took it out. I just read your message, and I'm really sorry because this is a brand-new animal.

1 Like
8

I hope I'm not mistaken, it looks like it's already installed.

1 Like
9

Thank you

I wanted to hear that :slight_smile:

10

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.