I’ve been messing around with the login window settings, I’ve noticed when you set the login box alignment to the left side and you change the cursor to anything other than Adwaita it causes minor graphical glitches only in the login box area. (almost like the missingno thing from pokemon) I’ve also got the icons set to BeautyLine.
It doesn’t occur when the alignment is set to center or right hand side. Unable to take a screenshot to show what I mean. Like I said it’s minor, I can still type my password and login. But maybe the team should check it out and see if they can replicate it.
garuda-inxi
System:
Kernel: 6.13.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=dd883428-337f-407b-8361-45c6c0dff9f6 rw rootflags=subvol=@
quiet resume=UUID=ead5ee16-77cf-4fa6-91f1-e2c86e1439ee loglevel=3 ibt=off
Desktop: Cinnamon v: 6.4.8 tk: GTK v: 3.24.48 wm: Muffin v: 6.4.1 tools:
avail: cinnamon-screensaver,xautolock vt: 7 dm: LightDM v: 1.32.0
Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: B450 TOMAHAWK (MS-7C02) v: 1.0
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: 1.J5 date: 09/04/2024
CPU:
Info: model: AMD Ryzen 3 2200G with Radeon Vega Graphics bits: 64 type: MCP
arch: Zen level: v3 note: check built: 2017-19 process: GF 14nm
family: 0x17 (23) model-id: 0x11 (17) stepping: 0 microcode: 0x8101016
Topology: cpus: 1x dies: 1 clusters: 1 cores: 4 smt: <unsupported> cache:
L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 1422 min/max: 1600/3500 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 1422 2: 1422 3: 1422
4: 1422 bogomips: 27999
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX
470/480/570/570X/580/580X/590] vendor: ASUSTeK driver: amdgpu v: kernel
arch: GCN-4 code: Arctic Islands process: GF 14nm built: 2016-20 pcie:
gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16 ports: active: DVI-D-1
empty: DP-1,DVI-D-2,HDMI-A-1 bus-ID: 10:00.0 chip-ID: 1002:67df
class-ID: 0300 temp: 49.0 C
Display: x11 server: X.Org v: 21.1.16 with: Xwayland v: 24.1.6 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37")
s-diag: 485mm (19.11")
Monitor-1: DVI-D-1 mapped: DVI-D-0 model: Samsung SyncMaster
serial: <filter> built: 2009 res: mode: 1600x900 hz: 60 scale: 100% (1)
dpi: 92 gamma: 1.2 size: 443x250mm (17.44x9.84") diag: 509mm (20")
ratio: 16:9 modes: max: 1600x900 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.3.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 570 Series (radeonsi
polaris10 LLVM 19.1.7 DRM 3.61 6.13.5-zen1-1-zen) device-ID: 1002:67df
memory: 3.91 GiB unified: no
API: Vulkan v: 1.4.304 layers: 4 device: 0 type: discrete-gpu name: AMD
Radeon RX 570 Series (RADV POLARIS10) driver: N/A device-ID: 1002:67df
surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 19.1.7 256
bits) driver: N/A device-ID: 10005:0000 surfaces: xcb,xlib
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Ellesmere HDMI Audio [Radeon RX
470/480 / 570/580/590] vendor: ASUSTeK driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 10:00.1
chip-ID: 1002:aaf0 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3
speed: 8 GT/s lanes: 16 bus-ID: 30:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.13.5-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Message: No PCI device data found.
Device-1: Huawei HUAWEI_MOBILE driver: cdc_ether type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:3 chip-ID: 12d1:1591
class-ID: 0a00
IF: enp18s0f0u8 state: up speed: 150 Mbps duplex: half mac: <filter>
Info: services: NetworkManager,systemd-timesyncd
Drives:
Local Storage: total: 1.14 TiB used: 192.72 GiB (16.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Mushkin model: MKNSSDHL250GB-D8
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: S1111A0L temp: 43.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ABD100
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: 1U scheme: GPT
Partition:
ID-1: / raw-size: 215.5 GiB size: 215.5 GiB (100.00%)
used: 192.72 GiB (89.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 215.5 GiB size: 215.5 GiB (100.00%)
used: 192.72 GiB (89.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 215.5 GiB size: 215.5 GiB (100.00%)
used: 192.72 GiB (89.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 215.5 GiB size: 215.5 GiB (100.00%)
used: 192.72 GiB (89.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.54 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 4
dev: /dev/zram0
ID-2: swap-2 type: partition size: 17.09 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
System Temperatures: cpu: 43.1 C mobo: N/A gpu: amdgpu temp: 50.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 893
Info:
Memory: total: 16 GiB available: 15.54 GiB used: 1.85 GiB (11.9%)
Processes: 263 Power: uptime: 49m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.2 GiB services: csd-power,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1378 libs: 458 tools: octopi,paru,yay
Compilers: gcc: 14.2.1 Shell: garuda-inxi default: fish v: 4.0.0
running-in: gnome-terminal inxi: 3.3.37
Garuda (2.7.2-1):
System install date: 2025-02-27
Last full system update: 2025-03-05
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units: