Microphone mute button LED always on

Issues & Assistance KDE
1

After install Garuda KDE dragonized edition, the mic button LED is always on when muted and off. Toggling does disable and enable mic, but LED doesn’t change.

does anyone know a solution or has fixed this?

garuda-inxi:

System:
  Kernel: 6.10.4-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=248b1a22-6e08-4ed9-8367-350243f4ed57 rw rootflags=subvol=@
    quiet rd.luks.uuid=07d431d0-6687-4e7b-8e61-7413be06bfdf loglevel=3
    ibt=off
  Desktop: KDE Plasma v: 6.1.4 tk: Qt v: N/A info: frameworks v: 6.4.0
    wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: Zenbook S 13 UX5304VA_UX5304VA v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX5304VA v: 1.0 serial: <superuser required>
    uuid: <superuser required> UEFI: American Megatrends LLC. v: UX5304VA.305
    date: 11/20/2023
Battery:
  ID-1: BAT0 charge: 57.9 Wh (100.0%) condition: 57.9/63.0 Wh (91.8%)
    volts: 8.7 min: 8.0 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
    status: full cycles: 63
CPU:
  Info: model: 13th Gen Intel Core i7-1355U bits: 64 type: MST AMCP
    arch: Raptor Lake level: v3 note: check built: 2022+ process: Intel 7 (10nm)
    family: 6 model-id: 0xBA (186) stepping: 3 microcode: 0x4121
  Topology: cpus: 1x cores: 10 mt: 2 tpc: 2 st: 8 threads: 12 smt: enabled
    cache: L1: 928 KiB desc: d-8x32 KiB, 2x48 KiB; i-2x32 KiB, 8x64 KiB
    L2: 6.5 MiB desc: 2x1.2 MiB, 2x2 MiB L3: 12 MiB desc: 1x12 MiB
  Speed (MHz): avg: 424 high: 600 min/max: 400/5000:3700 scaling:
    driver: intel_pstate governor: powersave cores: 1: 600 2: 400 3: 497 4: 400
    5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 bogomips: 62668
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel alternate: xe arch: Gen-13 process: Intel 7 (10nm)
    built: 2022+ ports: active: eDP-1 empty: DP-1,DP-2,HDMI-A-1
    bus-ID: 00:02.0 chip-ID: 8086:a7a1 class-ID: 0300
  Device-2: Shinetech USB2.0 FHD UVC WebCam driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-9:2 chip-ID: 3277:0051
    class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2
    compositor: kwin_wayland driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: 0
  Monitor-1: eDP-1 model: Samsung 0x417b built: 2021 res: 2880x1800 dpi: 253
    gamma: 1.2 size: 289x186mm (11.38x7.32") diag: 344mm (13.5") ratio: 16:10
    modes: 2880x1800
  API: Vulkan v: 1.3.279 layers: 3 device: 0 type: integrated-gpu
    name: Intel Graphics (RPL-U) driver: mesa intel v: 24.1.5-arch1.2
    device-ID: 8086:a7a1 surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 18.1.8 256 bits) driver: mesa llvmpipe
    v: 24.1.5-arch1.2 (LLVM 18.1.8) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: Intel Raptor Lake-P/U/H cAVS vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel, snd_soc_avs,
    snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:51ca class-ID: 0401
  API: ALSA v: k6.10.4-zen2-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.2.2 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:51f1 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:3 chip-ID: 8087:0033
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: not found
    rfk-block: hardware: no software: no address: see --recommends
Drives:
  Local Storage: total: 953.87 GiB used: 22.27 GiB (2.3%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW010T8
    size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 004C temp: 39.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 195.31 GiB size: 195.31 GiB (100.00%)
    used: 22.27 GiB (11.4%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-07d431d0-6687-4e7b-8e61-7413be06bfdf
  ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
    used: 728 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p7 maj-min: 259:7
  ID-3: /home raw-size: 195.31 GiB size: 195.31 GiB (100.00%)
    used: 22.27 GiB (11.4%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-07d431d0-6687-4e7b-8e61-7413be06bfdf
  ID-4: /var/log raw-size: 195.31 GiB size: 195.31 GiB (100.00%)
    used: 22.27 GiB (11.4%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-07d431d0-6687-4e7b-8e61-7413be06bfdf
  ID-5: /var/tmp raw-size: 195.31 GiB size: 195.31 GiB (100.00%)
    used: 22.27 GiB (11.4%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-07d431d0-6687-4e7b-8e61-7413be06bfdf
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.24 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
Sensors:
  Src: /sys System Temperatures: cpu: 48.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB note: est. available: 15.24 GiB used: 2.14 GiB (14.0%)
  Processes: 291 Power: uptime: 1h 8m states: freeze,mem,disk
    suspend: s2idle avail: deep wakeups: 0 hibernate: platform avail: shutdown,
    reboot, suspend, test_resume image: 6.08 GiB
    services: org_kde_powerdevil,upowerd Init: systemd v: 256
    default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1164 libs: 383 tools: yay Compilers:
    gcc: 14.2.1 Shell: garuda-inxi default: Bash v: 5.2.32 running-in: yakuake
    inxi: 3.3.35
Garuda (2.6.26-1):
  System install date:     2024-08-13
  Last full system update: 2024-08-13
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:
2

grafik

grafik

No, works here.
You try with different headsets?
Did you click on the icon???

3

Same results. if I selected other microphone and disable and enable, the LED turns off but I have do the same in every boot

4

ok… With the audio the problem is the same.

I explain myself, on garuda boot, no sound/microphone activated.

I have activated manually, disable and enable and works well…

How it activate permanently on boot the sound/micro? DE → KDE Plasma

5

Solved it!

sudo pacman -S alsa-utils

sudo systemctl enable alsa-restore

sudo systemctl start alsa-restore

1 Like
6

You should probably then mark this as the solution for other folk.

7

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.