Meld in Rani

Languages Deutsch
1 
╰─ λ # ><°> garuda-inxi
System:
Kernel: 6.15.4-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=1f858aa4-dc21-4849-9613-fd93f2269a29 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.4.2 tk: Qt v: N/A info: frameworks v: 6.15.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: A520M S2H v: -CF
serial: <superuser required>
Mobo: Gigabyte model: A520M S2H v: x.x serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends LLC. v: F19d
date: 09/02/2024
Battery:
Device-1: hidpp_battery_0 model: Logitech MX Ergo Multi-Device Trackball
serial: <filter> charge: 10% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: AMD Ryzen 5 5600GT with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 3 level: v3 note: check built: 2021-22
process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA500011
Topology: cpus: 1x dies: 1 clusters: 1 cores: 6 threads: 12 tpc: 2
smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB
desc: 6x512 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 2391 min/max: 422/4669 boost: enabled scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 2391 2: 2391 3: 2391
4: 2391 5: 2391 6: 2391 7: 2391 8: 2391 9: 2391 10: 2391 11: 2391 12: 2391
bogomips: 86238
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series /
Radeon Mobile Series] vendor: Gigabyte driver: amdgpu v: kernel
arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 ports: active: HDMI-A-1 empty: DP-1,HDMI-A-2
bus-ID: 05:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 29.0 C
Display: wayland server: X.org v: 1.21.1.18 with: Xwayland v: 24.1.8
compositor: kwin_wayland driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: 0
Monitor-1: HDMI-A-1 model: Dell P2210 serial: <filter> built: 2011 res:
mode: 1680x1050 hz: 60 scale: 100% (1) dpi: 90 gamma: 1.2
size: 474x296mm (18.66x11.65") diag: 559mm (22") ratio: 16:10 modes:
max: 1680x1050 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.4-arch1.2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
renoir ACO DRM 3.63 6.15.4-zen2-1-zen) device-ID: 1002:1638
memory: 500 MiB unified: no display-ID: :1.0
API: Vulkan v: 1.4.313 layers: 14 device: 0 type: integrated-gpu name: AMD
Radeon Graphics (RADV RENOIR) driver: mesa radv v: 25.1.4-arch1.2
device-ID: 1002:1638 surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 20.1.6 256 bits) driver: mesa llvmpipe v: 25.1.4-arch1.2 (LLVM
20.1.6) device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: corectrl wl: wayland-info
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Renoir Radeon High Definition
Audio driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 05:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: Gigabyte driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.15.4-zen2-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.6 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd
Drives:
Local Storage: total: 931.51 GiB used: 654.46 GiB (70.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNV2S1000G
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: CBG04418 temp: 26.9 C
scheme: GPT
Partition:
ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 654.46 GiB (70.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 616 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 654.46 GiB (70.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 654.46 GiB (70.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 654.46 GiB (70.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 14.99 GiB used: 12.8 MiB (0.1%)
priority: 100 comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 36.6 C mobo: 29.0 C gpu: amdgpu temp: 30.0 C
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 14.99 GiB used: 3.28 GiB (21.9%)
Processes: 338 Power: uptime: 12m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 5.97 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: pm: dpkg pkgs: 0 pm: pacman pkgs: 2565 libs: 603 tools: octopi,
pacaur, pacseek, paru, pikaur, trizen, yay Compilers: clang: 20.1.7
gcc: 15.1.1 alt: 13/14 Shell: garuda-inxi default: fish v: 4.0.2
running-in: konsole inxi: 3.3.38
Garuda (2.7.3-1):
System install date:     2025-03-21
Last full system update: 2025-07-03
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       No/Undetected
Failed units:

… nach dem Update heute hatte ich in Rani wieder Meldung (pacdiff), wenn ich in Rani dann Start Merging drücke öffnet sich Meld aber nicht ???

2

Had the same problem, Garuda Rani doesn’t seem to launch Meld, so I just launched it manually and compared the files that way.

1 Like
3

Einfach meld

sudo pacman -S meld

installieren.

Weil es nicht alle DE’s von Garuda’s Anbeginn, und speziell KDE, vorinstalliert haben.

Und bitte @Terrorizer :smiley:

  • Formatieren Sie alle Terminaltexte (einschließlich garuda-inxi) als Code-Block, indem Sie auf die Schaltfläche für vorformatierten Text, </>, klicken, oder setzen Sie drei Tilde (~) über und unter den Text.

bearbeite dein garuda-inxi .

3 Likes
4

Same thing happened to me

1 Like
5

Yeah it doesn’t start for me via rani anymore, have to do pacdiff in Konsole

1 Like
6

Aaaah this is too funny. I’ve tested this as working when pushing the last commits. :frowning:

Here I replaced the logic with a script in garuda-lib (it was indeed broken before that).

You guys are all running the latest version of Rani and garuda-libs?

Someone do me a favor and test whether running bash /usr/lib/garuda/pacdiff-merge works as expected please.

2 Likes
7

Latest as non git version?

bash /usr/lib/garuda/pacdiff-merge 
bash: /usr/lib/garuda/pacdiff-merge: No such file or directory
8

Well that explains everything :sweat_smile: let me look into this. And yes, 3.0.2.

2 Likes
9

Okay, yeah, that is the version I have. Time to call the exorcist.

1 Like
10

Aaaaaaaaaaaaaah. It hurts seeing it, I accidentally placed it in the wrong place. My bad, I’ll fix this asap.

To verify, run bash /usr/bin/pacdiff-merge, this should work as expected.

Edit: should be fixed once you guys updated.

5 Likes