Long boot time after update

i get a black screen for a minute than get this text for a few second (timed out waiting for device /dev/tpmrm0)

System:
  Kernel: 6.9.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=8c7789a2-7c10-4da1-bd45-b2e3e9bf4508 rw rootflags=subvol=@
    quiet resume=UUID=e0e06602-5094-4511-ba9c-fa971db65252 loglevel=3 ibt=off
  Desktop: KDE Plasma v: 6.1.0 tk: Qt v: N/A info: frameworks v: 6.3.0
    wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: X555LAB v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: X555LAB v: 1.0 serial: <superuser required>
    part-nu: ASUS-NotebookSKU uuid: <superuser required>
    UEFI: American Megatrends v: X555LAB.603 date: 04/16/2019
Battery:
  ID-1: BAT0 charge: 30.1 Wh (96.5%) condition: 31.2/31.2 Wh (100.0%)
    volts: 7.6 min: 7.6 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
    status: not charging cycles: 20
CPU:
  Info: model: Intel Core i3-5005U bits: 64 type: MT MCP arch: Broadwell
    gen: core 5 level: v3 note: check built: 2015-18 process: Intel 14nm
    family: 6 model-id: 0x3D (61) stepping: 4 microcode: 0x2F
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
    L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1243 high: 1601 min/max: 500/1900 scaling:
    driver: intel_cpufreq governor: ondemand cores: 1: 950 2: 843 3: 1601
    4: 1581 bogomips: 15977
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel HD Graphics 5500 vendor: ASUSTeK driver: i915 v: kernel
    arch: Gen-8 process: Intel 14nm built: 2014-15 ports: active: HDMI-A-2
    off: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:1616
    class-ID: 0300
  Device-2: Realtek USB Camera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:3 chip-ID: 0bda:57b5
    class-ID: 0e02 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.0
    compositor: kwin_wayland driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: 0
  Monitor-1: HDMI-A-2 res: 1920x1080 size: N/A modes: N/A
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast surfaceless: drv: iris wayland: drv: iris x11:
    drv: iris inactive: gbm
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.1.1-arch1.1
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 5500 (BDW
    GT2) device-ID: 8086:1616 memory: 3.72 GiB unified: yes display-ID: :1.0
  API: Vulkan v: 1.3.279 layers: 3 device: 0 type: integrated-gpu name: Intel
    HD Graphics 5500 (BDW GT2) driver: mesa intel v: 24.1.1-arch1.1
    device-ID: 8086:1616 surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 17.0.6 256 bits) driver: mesa llvmpipe
    v: 24.1.1-arch1.1 (LLVM 17.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
Audio:
  Device-1: Intel Broadwell-U Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c class-ID: 0403
  Device-2: Intel Wildcat Point-LP High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
    class-ID: 0403
  API: ALSA v: k6.9.5-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK driver: r8168 v: 8.053.00-NAPI modules: r8169 pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  Device-2: Broadcom BCM43228 802.11a/b/g/n vendor: Foxconn driver: wl
    v: kernel modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1
    bus-ID: 03:00.0 chip-ID: 14e4:4359 class-ID: 0280
  IF: wlp3s0 state: down mac: <filter>
  IF-ID-1: virbr0 state: down mac: <filter>
  Info: services: NetworkManager, smbd, systemd-timesyncd
Bluetooth:
  Device-1: Foxconn / Hon Hai BCM20702A0 driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6:4 chip-ID: 0489:e046
    class-ID: fe01 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 4.0
    lmp-v: 6 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
  Local Storage: total: 1.13 TiB used: 29.66 GiB (2.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT240BX500SSD1
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 056 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10SPZX-08Z10
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5400 serial: <filter> fw-rev: 1A05 scheme: MBR
Partition:
  ID-1: / raw-size: 97.34 GiB size: 97.34 GiB (100.00%)
    used: 29.66 GiB (30.5%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
  ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
    used: 588 KiB (0.1%) fs: vfat dev: /dev/sda7 maj-min: 8:7
  ID-3: /home raw-size: 97.34 GiB size: 97.34 GiB (100.00%)
    used: 29.66 GiB (30.5%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
  ID-4: /var/log raw-size: 97.34 GiB size: 97.34 GiB (100.00%)
    used: 29.66 GiB (30.5%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
  ID-5: /var/tmp raw-size: 97.34 GiB size: 97.34 GiB (100.00%)
    used: 29.66 GiB (30.5%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 7.62 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
  ID-2: swap-2 type: partition size: 4 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/sda5 maj-min: 8:5
Sensors:
  System Temperatures: cpu: 41.0 C pch: 38.5 C mobo: N/A
  Fan Speeds (rpm): cpu: 2600
Info:
  Memory: total: 8 GiB available: 7.62 GiB used: 2.49 GiB (32.7%)
  Processes: 200 Power: uptime: 8m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 3.03 GiB services: org_kde_powerdevil,upowerd
    Init: systemd v: 256 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1546 libs: 438 tools: gnome-software, octopi,
    pamac, paru Compilers: gcc: 14.1.1 Shell: garuda-inxi default: fish
    v: 3.7.1 running-in: konsole inxi: 3.3.34
Garuda (2.6.26-1):
  System install date:     2024-01-01
  Last full system update: 2024-06-20
  Is partially upgraded:   No
  Relevant software:       snapper tlp NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:            

https://bbs.archlinux.org/viewtopic.php?id=296699

5 Likes

thank you for helping me solve this issue.thank you

command to solve this if anyone else have this issue - “systemctl mask dev-tpmrm0.device”

2 Likes

Glad it helped!
Tip for the future: this was the only (!) hit of an internet search with that exact (between “”) message… :wink:

3 Likes

ok in future i will do a internet search before posting here.still i trust this forum more than the arch wiki :shushing_face:
again thank you for helping a noob like me

3 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.