Latte Dock Start Apps with sudo

Hello.

System:
  Kernel: 5.17.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=29aa3365-2bc5-4be4-9e27-13fa307c81ec rw [email protected]
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3
  Desktop: KDE Plasma v: 5.24.4 tk: Qt v: 5.15.3 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Gigabyte model: H310M H 2.0 v: x.x
    serial: <superuser required> UEFI: American Megatrends v: F12
    date: 08/13/2019
CPU:
  Info: model: Intel Core i3-9100F bits: 64 type: MCP arch: Coffee Lake
    family: 6 model-id: 0x9E (158) stepping: 0xB (11) microcode: 0xEC
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
    desc: 1x6 MiB
  Speed (MHz): avg: 4101 high: 4136 min/max: 800/4200 scaling:
    driver: intel_pstate governor: performance cores: 1: 4128 2: 4094 3: 4047
    4: 4136 bogomips: 28800
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: disabled, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: Micro-Star MSI driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: DP-2 empty: DP-1, DVI-D-1, HDMI-A-1, HDMI-A-2
    bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 506x285mm (19.92x11.22")
    s-diag: 581mm (22.86")
  Monitor-1: DP-2 mapped: DisplayPort-1 model: ASUS VP228 serial: <filter>
    built: 2020 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
    size: 476x268mm (18.74x10.55") diag: 546mm (21.5") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  OpenGL: renderer: AMD Radeon RX 590 Series (polaris10 LLVM 13.0.1 DRM
    3.44 5.17.1-zen1-1-zen)
    v: 4.6 Mesa 22.0.0 direct render: Yes
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a2f0
    class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0 class-ID: 0403
  Sound Server-1: ALSA v: k5.17.1-zen1-1-zen running: yes
  Sound Server-2: PulseAudio v: 15.0 running: no
  Sound Server-3: PipeWire v: 0.3.49 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.36 TiB used: 129.44 GiB (9.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD110
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
    speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A8R0
    scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SSD PLUS 240GB
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 04RL scheme: GPT
  ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
    model: WDS240G2G0A-00JH30 size: 223.57 GiB block-size: physical: 512 B
    logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0400
    scheme: GPT
  ID-4: /dev/sdd maj-min: 8:48 type: USB vendor: SanDisk
    model: Cruzer Blade size: 14.59 GiB block-size: physical: 512 B
    logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: GPT
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 79.1 GiB size: 79.1 GiB (100.00%) used: 62.21 GiB (78.6%)
    fs: btrfs dev: /dev/sdc4 maj-min: 8:36
  ID-2: /boot/efi raw-size: 511.6 MiB size: 510.6 MiB (99.80%)
    used: 580 KiB (0.1%) fs: vfat dev: /dev/sdc6 maj-min: 8:38
  ID-3: /home raw-size: 79.1 GiB size: 79.1 GiB (100.00%)
    used: 62.21 GiB (78.6%) fs: btrfs dev: /dev/sdc4 maj-min: 8:36
  ID-4: /var/log raw-size: 79.1 GiB size: 79.1 GiB (100.00%)
    used: 62.21 GiB (78.6%) fs: btrfs dev: /dev/sdc4 maj-min: 8:36
  ID-5: /var/tmp raw-size: 79.1 GiB size: 79.1 GiB (100.00%)
    used: 62.21 GiB (78.6%) fs: btrfs dev: /dev/sdc4 maj-min: 8:36
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 15.57 GiB used: 1.8 MiB (0.0%)
    priority: 100 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 27.8 C mobo: 16.8 C gpu: amdgpu temp: 45.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1097
Info:
  Processes: 274 Uptime: 9m wakeups: 0 Memory: 15.57 GiB
  used: 2.58 GiB (16.5%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.2.0 Packages: note: see --pkg apt: 0 pacman: 1723 lib: 494 pkg: 0
  flatpak: 0 Shell: Bash v: 5.1.16 running-in: konsole inxi: 3.3.14
Garuda (2.5.6-2):
  System install date:     2022-03-27
  Last full system update: 2022-04-02
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       Probably (Run as root to verify)
  Snapshots:               Snapper
  Failed units:            bluetooth-autoconnect.service

When I open any ide such as Arduino or visual studio code, I get an error because I did not start it with the manager. When I start it with the administrator, all the extensions I have installed are gone. How can I set the latte dock to start automatically with sudo?

This is not a good idea. What's the problem just running the IDE with sudo from a terminal?

2 Likes

im using arduino ide and when i want to upload a code into my arduino card. Arduino sends permission permission error.

When I opened it with sudo from the terminal, I saw that the extensions and plugins I used were lost.

Hello, Can we see a screenshot of the error including exactly the command you use when the error is encountered, please?

1 Like

I cant upload photo because im a new user. But arduino giving this error.

avrdude: ser_open(): can't open device "/dev/ttyUSB0": Permission denied

How are you running/starting arduino? IE: Terminal? Menu?

Because when running as sudo your arduino is looking at root's conf files. Not your $USER.

Latte Dock menu

Arduino should have a menu item to "run as administrator"... Are you using this menu item method then you receive the error?

In the meantime, checkout the links below.

Check This Concerning adding yourself to the group that the device(s) /dev/ttyUSB* belong to.

Set Serial Port Permissions for ttyUSB* Arduino Documentation

I predict your answer lies in adding yourself to the group that "/dev/ttyUSB0" belongs to, then logout/login and try arduino again.

All the luck. :crossed_fingers:

5 Likes

Okay i did.

1 Like

...and? Is arduino happy yet? Is the problem solved?
If it is solved let us know what you did to fix it please.

2 Likes

I agree.

@yusufalikaraca0 please give a full explanation of what you did to resolve your issue. That helps others with the same issue to more easily find a solution if they are experiencing a similar issue.

3 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.