Latte dock doesn't show up for drag-and-drop actions

Since the last update to Latte dock, it doesn't show up when trying to use drag-and-drop actions (like say dragging a link into mpv).]

Anyone facing similar issue? Or any solutions what can be done?

╰─λ inxi -Faz
System:
Kernel: 5.16.0-arch1-g14-1 x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: pm_debug_messages amd_pmc.enable_stb=1 amd_pmc.dyndbg="+p"
acpi.dyndbg="file drivers/acpi/x86/s2idle.c +p"
BOOT_IMAGE=/@/boot/vmlinuz-linux-g14
root=UUID=edc8611c-d94e-4567-85f8-02b07c91fda3 rw [email protected]
quiet
cryptdevice=UUID=98382a7e-5fd2-4dca-b6e6-6aca242b8ece:luks-98382a7e-5fd2-4dca-b6e6-6aca242b8ece
root=/dev/mapper/luks-98382a7e-5fd2-4dca-b6e6-6aca242b8ece splash
rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3
Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ROG Zephyrus G14 GA401II_GA401II
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: GA401II v: 1.0 serial: <superuser required>
UEFI: American Megatrends v: GA401II.219 date: 12/30/2020
Battery:
ID-1: BAT0 charge: 59.0 Wh (79.7%) condition: 74.0/76.0 Wh (97.4%)
volts: 15.8 min: 15.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
status: Not charging
Device-1: hid-dc:2c:26:05:66:0e-battery model: Keychron K2 serial: N/A
charge: N/A status: Discharging
Device-2: hidpp_battery_0
model: Logitech G304 Lightspeed Wireless Gaming Mouse serial: <filter>
charge: 100% (should be ignored) rechargeable: yes status: Discharging
CPU:
Info: model: AMD Ryzen 5 4600HS with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 2 family: 0x17 (23) model-id: 0x60 (96) stepping: 1
microcode: 0x8600104
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 8 MiB desc: 2x4 MiB
Speed (MHz): avg: 2999 high: 3656 min/max: 1400/3000 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3105 2: 3656
3: 3045 4: 2720 5: 3641 6: 2638 7: 3222 8: 1659 9: 2855 10: 2719 11: 3575
12: 3163 bogomips: 71881
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Renoir vendor: ASUSTeK driver: amdgpu v: kernel
bus-ID: 04:00.0 chip-ID: 1002:1636 class-ID: 0300
Display: x11 server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
loaded: amdgpu,ati unloaded: modesetting alternate: fbdev,vesa
display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0")
s-diag: 777mm (30.6")
Monitor-1: HDMI-A-0 res: 2560x1440 dpi: 109 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
v: kernel bus-ID: 04:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
vendor: ASUSTeK driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x
bus-ID: 04:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k5.16.0-arch1-g14-1 running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 02:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlp2s0 state: down mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB
driver: r8152 bus-ID: 6-2.4:4 chip-ID: 0bda:8153 class-ID: 0000
serial: <filter>
IF: enp4s0f4u2u4 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 5-4:4 chip-ID: 8087:0029 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 953.87 GiB used: 153.53 GiB (16.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW010T8
size: 953.87 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 004C
temp: 30.9 C scheme: GPT
Partition:
ID-1: / raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 153.53 GiB (16.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-98382a7e-5fd2-4dca-b6e6-6aca242b8ece
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 720 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 153.53 GiB (16.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-98382a7e-5fd2-4dca-b6e6-6aca242b8ece
ID-4: /var/log raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 153.53 GiB (16.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-98382a7e-5fd2-4dca-b6e6-6aca242b8ece
ID-5: /var/tmp raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 153.53 GiB (16.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-98382a7e-5fd2-4dca-b6e6-6aca242b8ece
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.11 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A gpu: amdgpu temp: 45.0 C
Fan Speeds (RPM): cpu: 3200
Info:
Processes: 376 Uptime: 18m wakeups: 6 Memory: 15.12 GiB
used: 4.84 GiB (32.0%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.1.0 clang: 13.0.0 Packages: pacman: 1496 lib: 369 Shell: fish
v: 3.3.1 default: Zsh v: 5.8 running-in: konsole inxi: 3.3.11

Please, use forum search function.

Home · psifidotos/Latte-Dock Wiki · GitHub.

2 Likes

Didn't catch you....Not supposed to report the problem here?

Hi, did you configure you latte dock config?

Haven't touched anything from default. I'd like back the functionality to use it as a taskbar for drag-and-drag actions.

It auto-hides (which I like) but as of now doesn't re-appear when trying to drag something into it (which it earlier used to do).

Since writing this post, I've received 2 updates to latte-dock-git and the issue still persists.

Try restoring Garuda default configs from Garuda Assistant

1 Like

I can not reproduce, you need to open a proper bug report at : Log in to KDE Bugtracking System

and include also your layout file that produces that bug

5 Likes

Did that. Still can't perform drag-and-drop :frowning:

Edit : Ok I just tested drag-and-drop for offline items, and it seems to be working. I just can't drag any kind of online links into the latte-dock.

Could be latte dock bug itself, could be a gtk-qt thing, could be a browser specific thing, I don't know. I'd have to experiment with different scenarios.

Since I don't know how to make the bug reproducible at the moment, mods can consider the issue solved.