La hora se muestra mal en el reloj de waybar. Les adjunto la configuración de /.config/waybar/config y el garuda-inxi. Alguien me puede ayudar? Gracias

System:
  Kernel: 6.10.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=45582bdb-7ab3-4b4e-8206-a16ef8c7c161 rw rootflags=subvol=@
    quiet rd.luks.uuid=4a2e66d3-4d00-4ccd-8fcb-a0bc8062c1c6
    rd.luks.uuid=57f8d960-1495-462f-8802-3cdb5e133bd9
    resume=/dev/mapper/luks-57f8d960-1495-462f-8802-3cdb5e133bd9 loglevel=3
    ibt=off
  Desktop: Sway v: 0.4 with: waybar tools: swayidle avail: swaylock vt: 1
    lm: greetd Distro: Garuda base: Arch Linux
Machine:
  Type: Desktop System: LENOVO product: F0EX00AHLD v: IdeaCentre AIO 3 22ADA05
    serial: <superuser required> Chassis: type: 13 serial: <superuser required>
  Mobo: LENOVO model: 371D v: WIN SDK0J40679 3273106783577
    serial: <superuser required> part-nu: LENOVO_MT_F0EX_BU_Lenovo_FM_IdeaCentre
    AIO 3 22ADA05 uuid: <superuser required> UEFI: LENOVO v: O4TKT26A
    date: 02/04/2021
CPU:
  Info: model: AMD Ryzen 3 3250U with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen/Zen+ note: check gen: 1 level: v3 note: check built: 2019
    process: GF 12nm family: 0x17 (23) model-id: 0x18 (24) stepping: 1
    microcode: 0x8108109
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 192 KiB desc: d-2x32 KiB; i-2x64 KiB L2: 1024 KiB desc: 2x512 KiB
    L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1382 high: 1400 min/max: 1400/2600 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1400 2: 1329
    3: 1400 4: 1400 bogomips: 20762
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series]
    vendor: Lenovo driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 04:00.0
    chip-ID: 1002:15d8 class-ID: 0300 temp: 50.0 C
  Device-2: Syntek Integrated Camera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5.3:6 chip-ID: 174f:243e
    class-ID: 0e02 serial: <filter>
  Display: wayland server: Xwayland v: 24.1.2 compositor: Sway v: 0.4
    driver: gpu: amdgpu display-ID: 1
  Monitor-1: eDP-1 model: Lenovo LEN-A350-C-A serial: <filter> built: 2019
    res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2 scale: 1
    size: 476x268mm (18.74x10.55") diag: 546mm (21.5") ratio: 16:9 modes:
    max: 1920x1080 min: 640x480
  API: Vulkan v: 1.3.295 layers: 3 device: 0 type: integrated-gpu name: AMD
    Radeon Vega 3 Graphics (RADV RAVEN2) driver: mesa radv v: 24.2.2-arch1.1
    device-ID: 1002:15d8 surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 18.1.8 256 bits) driver: mesa llvmpipe
    v: 24.2.2-arch1.1 (LLVM 18.1.8) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Lenovo
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 04:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Lenovo
    driver: snd_pci_acp3x v: kernel alternate: snd_rn_pci_acp3x, snd_pci_acp5x,
    snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
    snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
    snd_sof_amd_acp63 pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.5
    chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.6
    chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.10.9-zen1-1-zen status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.2.3 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
    vendor: Lenovo driver: rtw_8822ce v: N/A modules: rtw88_8822ce pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 02:00.0 chip-ID: 10ec:c822
    class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
    port: e000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5.1:5 chip-ID: 0bda:c123
    class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.1
    lmp-v: 10 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
  Local Storage: total: 1.03 TiB used: 20.55 GiB (2.0%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: MZALQ128HBHQ-000L1 size: 119.24 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: EL1QFXV7 temp: 36.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5400 serial: <filter> fw-rev: LFM4 scheme: GPT
Partition:
  ID-1: / raw-size: 111.21 GiB size: 111.21 GiB (100.00%)
    used: 20.54 GiB (18.5%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
    mapped: luks-4a2e66d3-4d00-4ccd-8fcb-a0bc8062c1c6
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 728 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 111.21 GiB size: 111.21 GiB (100.00%)
    used: 20.54 GiB (18.5%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
    mapped: luks-4a2e66d3-4d00-4ccd-8fcb-a0bc8062c1c6
  ID-4: /var/log raw-size: 111.21 GiB size: 111.21 GiB (100.00%)
    used: 20.54 GiB (18.5%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
    mapped: luks-4a2e66d3-4d00-4ccd-8fcb-a0bc8062c1c6
  ID-5: /var/tmp raw-size: 111.21 GiB size: 111.21 GiB (100.00%)
    used: 20.54 GiB (18.5%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
    mapped: luks-4a2e66d3-4d00-4ccd-8fcb-a0bc8062c1c6
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 7.73 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-57f8d960-1495-462f-8802-3cdb5e133bd9
  ID-2: swap-2 type: zram size: 3.52 GiB used: 471 MiB (13.1%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 59.5 C mobo: N/A gpu: amdgpu temp: 59.0 C
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 4 GiB note: est. available: 3.52 GiB used: 2.45 GiB (69.7%)
  Processes: 271 Power: uptime: 1h 4m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 1.39 GiB services: upowerd Init: systemd
    v: 256 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1366 libs: 406 tools: gnome-software, octopi,
    pacseek, pamac, paru Compilers: clang: 18.1.8 gcc: 14.2.1
    Shell: garuda-inxi default: fish v: 3.7.1 running-in: foot inxi: 3.3.35
Garuda (2.6.26-1):
  System install date:     2024-09-06
  Last full system update: 2024-09-09 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            

Y la configuración es la siguiente:

"clock": {
	"timezone": "America/Bogota",
	"tooltip-format": "<big>{:%A, %d.%B %Y }</big>\n<tt><small>{calendar}</small></tt>",
        "format": " {:%a %d %b  %H:%M}",	//24 hour format
        //"format": " {:%H:%M}",
        "on-click": "footclient -T waybar_calcurse -e calcurse",
        // Uncomment to enable right-click calcurse-caldav sync (you need to set it up in calcurse config)
        //"on-click-right": "notify-send \"Running calcurse-caldav...\" \"$(calcurse-caldav)\"",
        "tooltip-format": " {:%A %m/%d}\n\n<tt><small>{calendar}</small></tt>",
        "calendar": {
            "on-scroll": 1,
            "format": {
                "months":     "<span color='#ffead3'><b>{}</b></span>",
                "days":       "<span color='#ecc6d9'><b>{}</b></span>",
                "weeks":      "<span color='#99ffdd'><b>W{}</b></span>",
                "weekdays":   "<span color='#ffcc66'><b>{}</b></span>",
                "today":      "<span color='#ff6699'><b><u>{}</u></b></span>"
            },
        },
        "actions": {
            "on-scroll-up": "shift_up",
            "on-scroll-down": "shift_down"
        },
    },

Welcome to the Garuda Linux forums! ^^
Please refer to this thread:

It’s an issue with tzdata. If you downgrade it, the problem will go away for the time being.
Another thing you can do is to just take it and learn how to convert UTC to your local timezone on the fly without any conversion tools :smiley: tha’ts what I’ve been doing lololol

4 Likes

It seems to be fixed now. :smiley:

Parece estar solucionado ahora. :smiley:

By the way, welcome to the community @juankminos. :wave:

Por cierto, bienvenido a la comunidad, @juankminos :wave:

3 Likes

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.