KWatchGnuPG

[Fenris]

I will just start with this…

 ╭─fenris@fenris in ~ took 16ms
 ╰─λ sudo garuda-inxi
[sudo] password for fenris:         
System:
  Kernel: 6.8.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=cd6e149b-2970-476f-b742-e3dc1120bedc rw rootflags=subvol=@
    quiet rd.luks.uuid=264cadad-c8c3-46fe-b132-32f30ff8b69c
    rd.luks.uuid=0dd705d1-74f7-4ae7-8f55-96ae57f524b8
    resume=/dev/mapper/luks-0dd705d1-74f7-4ae7-8f55-96ae57f524b8 loglevel=3
    ibt=off
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 wm: xfwm4 v: 4.18.0
    with: xfce4-panel tools: xfce4-screensaver avail: xautolock dm: LightDM
    v: 1.32.0 Distro: Garuda base: Arch Linux
Machine:
  Type: Desktop Mobo: AZW model: MINI S v: 10 serial: N/A part-nu: 01
    uuid: 03000200-0400-0500-0006-000700080009 UEFI: American Megatrends LLC.
    v: ADLNV104 date: 02/06/2023
CPU:
  Info: model: Intel N100 socket: U3E1 bits: 64 type: MCP arch: Alder Lake
    level: v3 note: check built: 2021+ process: Intel 7 (10nm ESF) family: 6
    model-id: 0xBE (190) stepping: 0 microcode: 0x15
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 384 KiB
    desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 1x2 MiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 797 high: 909 min/max: 700/3400 base/boost: 2871/3400
    scaling: driver: intel_pstate governor: powersave volts: 1.0 V
    ext-clock: 100 MHz cores: 1: 876 2: 702 3: 702 4: 909 bogomips: 6451
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel Alder Lake-N [UHD Graphics] driver: i915 v: kernel
    alternate: xe arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports:
    active: HDMI-A-1 empty: HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:46d1
    class-ID: 0300
  Device-2: Creative Live! Cam Sync 1080p V2 driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4.4:8
    chip-ID: 041e:40a0 class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 21.1.13 compositor: xfwm4 v: 4.18.0 driver:
    X: loaded: modesetting alternate: fbdev,intel,vesa dri: iris gpu: i915
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer G247HYL serial: <filter>
    built: 2016 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: Vulkan v: 1.3.279 layers: 5 device: 0 type: integrated-gpu
    name: Intel Graphics (ADL-N) driver: mesa intel v: 24.0.6-arch1.2
    device-ID: 8086:46d1 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
    (LLVM 17.0.6 256 bits) driver: mesa llvmpipe v: 24.0.6-arch1.2 (LLVM
    17.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Device-1: Intel Alder Lake-N PCH High Definition Audio driver: snd_hda_intel
    v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:54c8 class-ID: 0403
  Device-2: C-Media CM106 Like Sound Device
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-4.3:6 chip-ID: 0d8c:0102 class-ID: 0300
  Device-3: Creative Live! Cam Sync 1080p V2 driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4.4:8
    chip-ID: 041e:40a0 class-ID: 0102 serial: <filter>
  API: ALSA v: k6.8.9-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.0.5 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel CNVi: Wi-Fi driver: iwlwifi v: kernel bus-ID: 00:14.3
    chip-ID: 8086:54f0 class-ID: 0280
  IF: wlo1 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000
    bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-3: ASIX AX88179 Gigabit Ethernet driver: ax88179_178a type: USB
    rev: 3.0 speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-4.1:4
    chip-ID: 0b95:1790 class-ID: ff00 serial: <filter>
  IF: enp0s20f0u4u1 state: down mac: <filter>
  IF-ID-1: tun0 state: unknown speed: 10000 Mbps duplex: full mac: N/A
  IF-ID-2: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
  IF-ID-3: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
  Info: services: NetworkManager, smbd, sshd, systemd-timesyncd,
    wpa_supplicant
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10:5 chip-ID: 8087:0026
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
    status: discoverable: no pairing: no
Drives:
  Local Storage: total: 2.73 TiB used: 99.7 GiB (3.6%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 990 PRO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7 temp: 52.9 C
    scheme: GPT
  SMART: yes health: PASSED on: 19d 4h cycles: 9
    read-units: 11,583,809 [5.93 TB] written-units: 2,689,354 [1.37 TB]
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LM015-2E8174
    family: Barracuda 2.5 5400 size: 1.82 TiB block-size: physical: 4096 B
    logical: 512 B sata: 3.1 speed: 6.0 Gb/s tech: HDD rpm: 5400
    serial: <filter> fw-rev: 0001 temp: 48 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 121d 21h cycles: 136
    read: 15.88 TiB written: 19.83 TiB Pre-Fail: attribute: Spin_Retry_Count
    value: 100 worst: 100 threshold: 97
Partition:
  ID-1: / raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
    used: 99.7 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
    maj-min: 254:1 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 728 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1
  ID-3: /home raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
    used: 99.7 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
    maj-min: 254:1 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
  ID-4: /var/log raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
    used: 99.7 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
    maj-min: 254:1 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
  ID-5: /var/tmp raw-size: 914.27 GiB size: 914.27 GiB (100.00%)
    used: 99.7 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
    maj-min: 254:1 mapped: luks-264cadad-c8c3-46fe-b132-32f30ff8b69c
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 16.94 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-0dd705d1-74f7-4ae7-8f55-96ae57f524b8
  ID-2: swap-2 type: zram size: 15.4 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 59.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB available: 15.4 GiB used: 6.08 GiB (39.5%)
    igpu: 60 MiB
  Processes: 302 Power: uptime: 24m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 6.14 GiB services: upowerd,xfce4-power-manager
    Init: systemd v: 255 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1854 libs: 476 tools: pamac,paru,yay Compilers:
    clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi (sudo) default: Bash v: 5.2.26
    running-in: xfce4-terminal inxi: 3.3.34
Garuda (2.6.26-1):
  System install date:     2024-04-11
  Last full system update: 2024-05-06
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            vmware-workstation-server.service vmware.service 

 ╭─fenris@fenris in ~ as 🧙 took 5s
 ╰─λ 

Ok here is the scoop, I got this application that keeps popping up when I login, KWatchGnuPG, and it looks like this…

• I don’t know how it got here
• I don’t know where it is to uninstall
• I don’t know if this application is important with things like Kleopatra
• I don’t know how to even use it

What I would like to do is get it to stop popping up when I log into my system (at the very least please).

Any ideas?

[SGS]

@Fenris

KWatchGnuPG

[BluishHumility]

@Fenris

I don’t know if this application is important with things like Kleopatra

Yes, kwatchgnupg comes from Kleopatra. For packages installed with Pacman, you can use pacman -Qo to see what package owns a given file.

❯ pacman -Qo /usr/bin/kwatchgnupg 
/usr/bin/kwatchgnupg is owned by kleopatra 24.02.2-1

If it is opening on its own, check that you are not using a saved session when you log in. See this post here for reference:

Firefox starts on boot up (XFCE)

I'm not sure if @Knine9 is coming back to the forum or not, but I guess I will describe the solution for this issue anyway, in case another XFCE user stumbles on this thread while searching after the same problem. In Settings, open Settings Manager -> Session and Startup -> General and make sure "Automatically save session on logout" is not checked. [image] A couple tabs down in that same menu is the "Saved Sessions" tab (if you have any saved sessions. If you do not, the tab disappears). G…