kscreensaver causes system to lock up and crash forcing a hard powerdown. it also causes input/output error on several files on the ssd. when i apply a slideshow to the lock screen after several hours the machine stops responding and when i try to log back in then screen is still black.
There was a template for posting here, you should have read it 
Please post your garuda-inxi in code brackets, like this:
```
output ofgaruda-inxi
```
4 Likes
System:
Kernel: 6.10.3-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=293fe8be-aa57-4da8-88c5-66790f403995 rw rootflags=subvol=@
net.ifnames=0 biosdevname=0 nvidia_drm.fbdev=1 nvidia-drm.modeset=1
resume=UUID=37597b3a-ebd2-4a0f-8395-3aecddd3a440 net.ifnames=0
biosdevname=0 nvidia_drm.fbdev=1 nvidia-drm.modeset=1 ibt=off
Desktop: KDE Plasma v: 6.1.4 tk: Qt v: N/A info: frameworks v: 6.4.0
wm: kwin_wayland with: krunner vt: 1 dm: 1: LightDM v: 1.32.0 note: stopped
2: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: LENOVO product: 30A6S0MW00 v: ThinkStation P500
serial: <superuser required>
Mobo: LENOVO model: 102F v: SDK0E50510 WIN 2625087105949
serial: <superuser required>
part-nu: LENOVO_MT_30A6_BU_Think_FM_ThinkStation P500
uuid: <superuser required> UEFI: LENOVO v: A4KTACAUS date: 10/30/2021
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0038
serial: N/A charge: 55% (should be ignored) rechargeable: yes
status: discharging
Device-2: hidpp_battery_1 model: Logitech ERGO M575 Trackball
serial: <filter> charge: 100% rechargeable: yes status: discharging
Device-3: ps-controller-battery-90:89:5f:3b:59:3f model: N/A serial: N/A
charge: N/A status: full
CPU:
Info: model: Intel Xeon E5-2620 v3 bits: 64 type: MT MCP arch: Haswell
level: v3 note: check built: 2013-15 process: Intel 22nm family: 6
model-id: 0x3F (63) stepping: 2 microcode: 0x49
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 15 MiB desc: 1x15 MiB
Speed (MHz): avg: 1340 high: 1794 min/max: 1200/3200 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1197 2: 1589 3: 1197
4: 1200 5: 1617 6: 1200 7: 1197 8: 1200 9: 1197 10: 1200 11: 1794 12: 1498
bogomips: 57464
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GM206GL [Quadro M2000] vendor: Dell driver: nvidia
v: 555.58.02 alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current
(as of 2024-06; EOL~2026-12-xx) arch: Maxwell code: GMxxx
process: TSMC 28nm built: 2014-2019 pcie: gen: 3 speed: 8 GT/s lanes: 16
ports: active: none off: DP-1,DP-3,DP-4 empty: DP-2 bus-ID: 03:00.0
chip-ID: 10de:1430 class-ID: 0300
Device-2: Logitech Logi Webcam C920e driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-9:6 chip-ID: 046d:08b6
class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2
compositor: kwin_wayland driver: X: loaded: nvidia gpu: nvidia
d-rect: 7680x1440 display-ID: 0
Monitor-1: DP-1 pos: primary,left res: 2560x1440 size: N/A modes: N/A
Monitor-2: DP-3 pos: right res: 2560x1440 size: N/A modes: N/A
Monitor-3: DP-4 pos: center res: 2560x1440 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia wayland: drv: nvidia
x11: drv: zink inactive: device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 555.58.02
glx-v: 1.4 direct-render: yes renderer: Quadro M2000/PCIe/SSE2
memory: 3.91 GiB display-ID: :1.0
API: Vulkan v: 1.3.279 layers: 14 device: 0 type: discrete-gpu
name: Quadro M2000 driver: nvidia v: 555.58.02 device-ID: 10de:1430
surfaces: xcb,xlib,wayland device: 1 type: cpu name: llvmpipe (LLVM
18.1.8 256 bits) driver: mesa llvmpipe v: 24.1.5-arch1.1 (LLVM 18.1.8)
device-ID: 10005:0000 surfaces: xcb,xlib,wayland
Audio:
Device-1: NVIDIA GM206 High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 03:00.1 chip-ID: 10de:0fba class-ID: 0403
Device-2: Logitech Yeti Orb driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-13:8
chip-ID: 046d:0ad5 class-ID: 0300 serial: <filter>
Device-3: Sony DualShock 4 [CUH-ZCT2x]
driver: playstation,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 7-1.4.4:7 chip-ID: 054c:09cc class-ID: 0300
API: ALSA v: k6.10.3-zen1-2-zen status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 1.2.2 status: active with: 1: wireplumber
status: active 2: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl
Server-2: PulseAudio v: 17.0 status: active with: 1: pulseaudio-alsa
type: plugin 2: pulseaudio-jack type: module tools: pacat,pactl,pavucontrol
Network:
Device-1: Emulex OneConnect NIC vendor: Hewlett-Packard StoreFabric CN1200E
10Gb Converged driver: be2net v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 8 port: N/A bus-ID: 04:00.0 chip-ID: 10df:0720 class-ID: 0200
temp: 48.0 C
IF: eth0 state: up speed: 10000 Mbps duplex: full mac: <filter>
Device-2: Emulex OneConnect NIC vendor: Hewlett-Packard StoreFabric
CN1200E 10Gb Converged driver: be2net v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 8 port: N/A bus-ID: 04:00.1 chip-ID: 10df:0720 class-ID: 0200
IF: eth1 state: down mac: <filter>
Info: services: NetworkManager, smbd, sshd, systemd-timesyncd
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-4:2
chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.0
lmp-v: 6 sub-v: 22bb hci-v: 6 rev: 22bb class-ID: 7c0104
Info: acl-mtu: 310:10 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object
transfer, audio, telephony
Drives:
Local Storage: total: 1.86 TiB used: 392.48 GiB (20.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Patriot model: P220 2048GB
size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 825 scheme: GPT
Partition:
ID-1: / raw-size: 1.83 TiB size: 1.83 TiB (100.00%) used: 392.48 GiB (21.0%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 584 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 1.83 TiB size: 1.83 TiB (100.00%)
used: 392.48 GiB (21.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 1.83 TiB size: 1.83 TiB (100.00%)
used: 392.48 GiB (21.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 1.83 TiB size: 1.83 TiB (100.00%)
used: 392.48 GiB (21.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.2 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
ID-2: swap-2 type: partition size: 34.36 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 48.0 C pch: 49.5 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 32 GiB available: 31.2 GiB used: 9.56 GiB (30.6%)
Processes: 412 Power: uptime: 3h 4m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.42 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 256 default: graphical
tool: systemctl
Packages: 2501 pm: pacman pkgs: 2495 libs: 653 tools: octopi,paru,yay
pm: flatpak pkgs: 6 Compilers: clang: 18.1.8 gcc: 14.2.1 alt: 12
Shell: garuda-inxi default: Bash v: 5.2.32 running-in: lxterminal
inxi: 3.3.35
Garuda (2.6.26-1):
System install date: 2024-03-24
Last full system update: 2024-08-10 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: Probably (Run as root to verify)
Failed units:
Try
On KDE it’s often needed to reboot after updates, ↻.
4 Likes
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.