KDE Wallet preventing WiFi connection on installed system

garuda-inxi
System:
Kernel: 6.16.4-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=7c00ebe1-2afc-47d3-89ef-5d20ec101133 rw rootflags=subvol=@
vt.default_red=30,243,166,249,137,245,148,186,88,243,166,249,137,245,148,166
vt.default_grn=30,139,227,226,180,194,226,194,91,139,227,226,180,194,226,173
vt.default_blu=46,168,161,175,250,231,213,222,112,168,161,175,250,231,213,200
quiet resume=UUID=e78c8cd0-674e-4997-ba57-cd0d1ffa26ab loglevel=3
Desktop: KDE Plasma v: 6.4.4 tk: Qt v: N/A info: frameworks v: 6.17.0
wm: kwin_x11 tools: avail: lxlock vt: 2 dm: SDDM Distro: Garuda
base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 83DV v: LOQ 15IRX9
serial: <superuser required> Chassis: type: 10 v: LOQ 15IRX9
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0T76462 WIN
serial: <superuser required> part-nu: LENOVO_MT_83DV_BU_idea_FM_LOQ 15IRX9
uuid: <superuser required> UEFI: LENOVO v: NECN39WW date: 09/06/2024
Battery:
ID-1: BAT1 charge: 23.3 Wh (39.7%) condition: 58.7/60.0 Wh (97.8%)
power: 30.4 W volts: 15.0 min: 15.4 model: SMP L23M4PK4 type: Li-poly
serial: <filter> status: discharging cycles: 134
CPU:
Info: model: 13th Gen Intel Core i7-13650HX bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1
microcode: 0x12F
Topology: cpus: 1x dies: 1 clusters: 8 cores: 14 threads: 20 mt: 6 tpc: 2
st: 8 smt: enabled cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32
KiB, 8x64 KiB L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB
desc: 1x24 MiB
Speed (MHz): avg: 800 min/max: 800/4700:4900:3600 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800
5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800 14: 800
15: 800 16: 800 17: 800 18: 800 19: 800 20: 800 bogomips: 112127
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Raptor Lake-S UHD Graphics vendor: Lenovo driver: i915
v: kernel alternate: xe arch: Xe process: Intel 10nm built: 2020-21 ports:
active: eDP-2 empty: DP-2, DP-3, HDMI-A-2, HDMI-A-3, HDMI-A-4, HDMI-A-5
bus-ID: 00:02.0 chip-ID: 8086:a78b class-ID: 0300
Device-2: NVIDIA AD107M [GeForce RTX 4060 Max-Q / Mobile] vendor: Lenovo
driver: nvidia v: 580.76.05 alternate: nouveau,nvidia_drm
non-free: 550-570.xx+ status: current (as of 2025-04) arch: Lovelace
code: AD1xx process: TSMC n4 (5nm) built: 2022+ pcie: gen: 1
speed: 2.5 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s ports:
active: none empty: DP-1,HDMI-A-1,eDP-1 bus-ID: 01:00.0 chip-ID: 10de:28e0
class-ID: 0300
Device-3: Syntek Integrated Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:3 chip-ID: 174f:246d
class-ID: fe01 serial: <filter>
Display: x11 server: X.Org v: 21.1.18 with: Xwayland v: 24.1.8
compositor: kwin_x11 driver: X: loaded: modesetting,nvidia unloaded: nouveau
alternate: fbdev,intel,nv,vesa dri: iris gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-2 model: AU Optronics 0x7ead serial: <filter> built: 2023
res: mode: 1920x1080 hz: 144 scale: 100% (1) dpi: 142 gamma: 1.2
size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9
modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
drv: nvidia device: 1 drv: iris device: 3 drv: swrast gbm: drv: iris
surfaceless: drv: nvidia x11: drv: iris inactive: wayland,device-2
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 25.2.1-arch1.5
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (RPL-S)
device-ID: 8086:a78b memory: 14.96 GiB unified: yes
API: Vulkan v: 1.4.321 layers: 11 device: 0 type: integrated-gpu
name: Intel Graphics (RPL-S) driver: mesa intel v: 25.2.1-arch1.5
device-ID: 8086:a78b surfaces: N/A device: 1 type: discrete-gpu
name: NVIDIA GeForce RTX 4060 Laptop GPU driver: nvidia v: 580.76.05
device-ID: 10de:28e0 surfaces: N/A device: 2 type: cpu name: llvmpipe
(LLVM 20.1.8 256 bits) driver: mesa llvmpipe v: 25.2.1-arch1.5 (LLVM
20.1.8) device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: nvidia-settings,nvidia-smi
wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Raptor Lake High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0401
Device-2: NVIDIA AD107 High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 10de:22be class-ID: 0403
API: ALSA v: k6.16.4-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.4.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 4000 bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8852BE PCIe 802.11ax Wireless Network vendor: Lenovo
driver: rtw89_8852be v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 3000 bus-ID: 08:00.0 chip-ID: 10ec:b852 class-ID: 0280
IF: wlp8s0 state: down mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:6 chip-ID: 0bda:4853
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: N/A
Drives:
Local Storage: total: 476.94 GiB used: 144.43 GiB (30.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron
model: MTFDKCD512QFM-1BD1AABLA size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 1002V3LN temp: 39.9 C scheme: GPT
Partition:
ID-1: / raw-size: 459.79 GiB size: 459.79 GiB (100.00%)
used: 144.42 GiB (31.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 8.6 MiB (2.9%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 459.79 GiB size: 459.79 GiB (100.00%)
used: 144.42 GiB (31.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 459.79 GiB size: 459.79 GiB (100.00%)
used: 144.42 GiB (31.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 459.79 GiB size: 459.79 GiB (100.00%)
used: 144.42 GiB (31.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.32 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
ID-2: swap-2 type: partition size: 16.86 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
System Temperatures: cpu: 52.8 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.32 GiB used: 4.27 GiB (27.9%)
Processes: 396 Power: uptime: 52m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.04 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: 1623 pm: pacman pkgs: 1598 libs: 402 tools: octopi,paru
pm: flatpak pkgs: 25 Compilers: clang: 20.1.8 gcc: 15.2.1 Shell: Bash
v: 5.3.3 default: fish v: 4.0.2 running-in: konsole inxi: 3.3.38
Garuda (2.8.2-2):
System install date:     2025-07-04
Last full system update: 2025-09-03
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       No/Undetected
Failed units:
--- System Health Check Report ---
22/23 checks run in 0.94 seconds ⌛
Powered by garuda-health 🦅

--- INFO ---
- Nvidia drivers are installed, but an incorrect or a suboptimal hardware profile is active (fix available)

Run garuda-health --fix to apply fixes.

Hi, I have been experiencing a similar issue for a while (1-2 months), though not on live USB. I have been connecting to the Internet and VPN using nmtui, but it asks for password every time. Sometimes, I also need to wait a few minutes or open the WiFi section in system settings to enter the password. Is there a way to fix Wallet or saving passwords on nmtui?

Does your session connect automatically when you start or reboot your PC?

It tries to connect but gives

Wireless Interface (wlp8s0)

No secrets were provided

after some minutes. ‘Waiting for authorization’ is displayed until the notifications, like in the link above. I usually use Ethernet, which connects automatically, but the notifications are still coming.

Heya. Are you using any form of autologin?

1 Like

I suppose not.

As a quick fix, this here should suffice (section 3.7):

3 Likes

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.