Kde' launching 'App' ( Failed) , Unit

Hey,

I’ve been running into this “Launching App Failed” issue lately, and I can’t figure it out. When I launch the first GUI app, it works fine, but trying to open another one causes problems, like I can only run one at a time.

The weird part is, everything works perfectly when I launch apps from the terminal. I even reinstalled Garuda KDE, but the issue is still there. I’ve tried reinstalling Plasma and switching from the Zen kernel to the regular one, but no luck.

Any ideas?
Thinks in advance

garuda inxi output

System:
  Kernel: 6.11.1-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
    clocksource: tsc avail: acpi_pm parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux
    root=UUID=bb21619c-cc9c-434e-a7da-cf86ca6bf0d6 rw rootflags=subvol=@
    quiet loglevel=3 ipv6.disable=1 ibt=off
  Desktop: KDE Plasma v: 6.1.5 tk: Qt v: N/A info: frameworks v: 6.6.0
    wm: kwin_x11 with: krunner vt: 2 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP EliteBook 840 G4 v: N/A
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 828C v: KBC Version 45.52 serial: <superuser required>
    part-nu: X3V00AV uuid: <superuser required> UEFI: HP v: P78 Ver. 01.45
    date: 12/15/2022
Battery:
  ID-1: BAT0 charge: 11.7 Wh (28.2%) condition: 41.5/51.3 Wh (80.9%)
    volts: 11.0 min: 11.6 model: Hewlett-Packard Primary type: Li-ion
    serial: <filter> status: discharging cycles: 1045
CPU:
  Info: model: Intel Core i5-7300U bits: 64 type: MT MCP arch: Amber/Kaby Lake
    note: check gen: core 7 level: v3 note: check built: 2017
    process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 9
    microcode: 0xF6
  Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2
    smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
    desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 2564 min/max: 400/2600 scaling: driver: intel_pstate
    governor: powersave cores: 1: 2564 2: 2564 3: 2564 4: 2564 bogomips: 21607
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel HD Graphics 620 vendor: Hewlett-Packard driver: i915
    v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports:
    active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0
    chip-ID: 8086:5916 class-ID: 0300
  Device-2: Cheng Uei Precision Industry (Foxlink) HP HD Camera
    driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0
    bus-ID: 1-9:3 chip-ID: 05c8:0397 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.2
    compositor: kwin_x11 driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0x123d built: 2013 res: 1920x1080
    hz: 60 dpi: 158 gamma: 1.2 size: 309x173mm (12.17x6.81") diag: 354mm (13.9")
    ratio: 16:9 modes: 1920x1080
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris x11: drv: iris
    inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.2.3-arch1.1
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 620 (KBL GT2)
    device-ID: 8086:5916 memory: 3.73 GiB unified: yes
  API: Vulkan v: 1.3.295 layers: 3 device: 0 type: integrated-gpu name: Intel
    HD Graphics 620 (KBL GT2) driver: mesa intel v: 24.2.3-arch1.1
    device-ID: 8086:5916 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
    (LLVM 18.1.8 256 bits) driver: mesa llvmpipe v: 24.2.3-arch1.1 (LLVM
    18.1.8) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_soc_avs
    bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.11.1-arch1-1 status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.2.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-LM vendor: Hewlett-Packard driver: e1000e
    v: kernel port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15d7 class-ID: 0200
  IF: enp0s31f6 state: down mac: <filter>
  Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:24fd
    class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:2 chip-ID: 8087:0a2b
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 4.2 lmp-v: 8
    status: discoverable: no pairing: no
Drives:
  Local Storage: total: 238.47 GiB used: 144.2 GiB (60.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Micron model: MTFDDAV256TBN-1AR15ABHA
    size: 238.47 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 0T12 scheme: GPT
Partition:
  ID-1: / raw-size: 25 GiB size: 25 GiB (100.00%) used: 10.72 GiB (42.9%)
    fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 1 GiB size: 1 GiB (99.80%) used: 584 KiB (0.1%)
    fs: vfat dev: /dev/sda4 maj-min: 8:4
  ID-3: /home raw-size: 19.5 GiB size: 19.5 GiB (100.00%)
    used: 1.65 GiB (8.4%) fs: btrfs dev: /dev/sda3 maj-min: 8:3
  ID-4: /var/log raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 10.72 GiB (42.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 10.72 GiB (42.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 7.63 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 40.0 C pch: 33.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 8 GiB available: 7.64 GiB used: 4.03 GiB (52.8%)
  Processes: 234 Power: uptime: 16m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 1 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 3.04 GiB services: org_kde_powerdevil,
    power-profiles-daemon, upowerd Init: systemd v: 256 default: graphical
    tool: systemctl
  Packages: pm: pacman pkgs: 1429 libs: 374 tools: yay pm: flatpak pkgs: 0
    Compilers: clang: 18.1.8 gcc: 14.2.1 Shell: garuda-inxi default: fish
    v: 3.7.1 running-in: konsole inxi: 3.3.36
Garuda (2.6.26-1):
  System install date:     2024-09-30
  Last full system update: 2024-10-05 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            

Well acc to a quick Google search , reinstalling KDE plasma might fix these issues, run:

sudo pacman -S plasma and reboot.

3 Likes

Thanks , it seems , it fixed it .
I guess i run -S plasma --needed , last time , my bad

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.