İ installed garuda kde lite version . How can i install kde connect?
Welcome and please post
garda-inxi
but open a terminal
sudo pacman -S kdeconnect
6 Likes
hello i m very new for garuda . where can i write my inxi , is there a spesific toppic for welcome
╭─hp@hp in ~ as 🧙 took 40s
[🔍] × garuda-inxi
System:
Kernel: 6.14.2-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=dc87726a-0b50-47d3-b001-507ab9996dd3 rw rootflags=subvol=@
quiet resume=UUID=da1478dc-47da-454d-962b-da5491602285 loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.3.4 tk: Qt v: N/A info: frameworks v: 6.12.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: HP product: HP Notebook v: Type1ProductConfigId
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 81FA v: 67.42 serial: <superuser required>
part-nu: W7T00EA#AB8 uuid: <superuser required> UEFI: Insyde v: F.34
date: 01/08/2019
Battery:
ID-1: BAT1 charge: 29.7 Wh (100.0%) condition: 29.7/41.4 Wh (71.8%)
volts: 16.9 min: 14.8 model: Hewlett-Packard PABAS0241231 type: Li-ion
serial: <filter> status: full
CPU:
Info: model: AMD A10-9600P RADEON R5 10 COMPUTE CORES 4C+6G bits: 64
type: MCP arch: Excavator level: v3 note: check built: 2015 process: GF 28nm
family: 0x15 (21) model-id: 0x65 (101) stepping: 1 microcode: 0x600611A
Topology: cpus: 1x dies: 1 clusters: 1 cores: 4 smt: <unsupported> cache:
L1: 320 KiB desc: d-4x32 KiB; i-2x96 KiB L2: 2 MiB desc: 2x1024 KiB
Speed (MHz): avg: 1261 min/max: 1200/2400 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 1261 2: 1261 3: 1261
4: 1261 bogomips: 19164
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics]
vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-3
code: Volcanic Islands process: TSMC 28nm built: 2014-19 ports:
active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:01.0 chip-ID: 1002:9874
class-ID: 0300
Device-2: Advanced Micro Devices [AMD/ATI] Topaz XT [Radeon R7 M260/M265
/ M340/M360 M440/M445 530/535 620/625 Mobile] vendor: Hewlett-Packard
driver: amdgpu v: kernel arch: GCN-3 code: Volcanic Islands
process: TSMC 28nm built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
link-max: gen: 2 speed: 5 GT/s lanes: 8 bus-ID: 05:00.0 chip-ID: 1002:6900
class-ID: 0380 temp: 37.0 C
Device-3: Cheng Uei Precision Industry (Foxlink) HP TrueVision HD
driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0
bus-ID: 1-1:2 chip-ID: 05c8:038f class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: kwin_wayland driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: 0
Monitor-1: eDP-1 model: AU Optronics 0x70ec built: 2015 res: 1366x768
dpi: 101 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
ratio: 16:9 modes: max: 1366x768 min: 640x480
API: Vulkan v: 1.4.309 layers: 5 device: 0 type: integrated-gpu name: AMD
Radeon R5 Graphics (RADV CARRIZO) driver: N/A device-ID: 1002:9874
surfaces: xcb,xlib,wayland device: 1 type: discrete-gpu name: AMD Radeon
R7 M340 (RADV ICELAND) driver: N/A device-ID: 1002:6900
surfaces: xcb,xlib,wayland device: 2 type: cpu name: llvmpipe (LLVM
19.1.7 256 bits) driver: N/A device-ID: 10005:0000
surfaces: xcb,xlib,wayland
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Info: Tools: api: vulkaninfo de: kscreen-console,kscreen-doctor x11: xprop
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 00:01.1
chip-ID: 1002:9840 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Family 15h Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 00:09.2
chip-ID: 1022:157a class-ID: 0403
API: ALSA v: k6.14.2-zen1-1-zen status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Hewlett-Packard
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 4000
bus-ID: 01:00.0 chip-ID: 10ec:8136 class-ID: 0200
IF: enp1s0 state: down mac: <filter>
Device-2: Realtek RTL8723BE PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtl8723be v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:b723
class-ID: 0280
IF: wlo1 state: up mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 2.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-1.4:4 chip-ID: 0bda:b008
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found
rfk-block: hardware: no software: no address: see --recommends
Drives:
Local Storage: total: 223.58 GiB used: 8.43 GiB (3.8%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 240 GB
size: 223.58 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 00RL scheme: GPT
Partition:
ID-1: / raw-size: 214.48 GiB size: 214.48 GiB (100.00%)
used: 8.43 GiB (3.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 608 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 214.48 GiB size: 214.48 GiB (100.00%)
used: 8.43 GiB (3.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 214.48 GiB size: 214.48 GiB (100.00%)
used: 8.43 GiB (3.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 214.48 GiB size: 214.48 GiB (100.00%)
used: 8.43 GiB (3.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 7.22 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 4
dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 47.1 C mobo: N/A
Fan Speeds (rpm): N/A
GPU: device: amdgpu temp: 47.0 C device: amdgpu temp: 37.0 C
Info:
Memory: total: 8 GiB note: est. available: 7.22 GiB used: 2.59 GiB (35.8%)
Processes: 265 Power: uptime: 12m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 2.88 GiB services: org_kde_powerdevil,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1261 libs: 391 tools: octopi pm: flatpak
pkgs: 0 Compilers: N/A Shell: garuda-inxi default: Bash v: 5.2.37
running-in: konsole inxi: 3.3.37
Garuda (2.7.2-1):
System install date: 2025-04-13
Last full system update: 2025-04-13 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units: `Önceden biçimlendirilmiş metin`
Your garuda-inxi
always belongs in the start post when you open a topic in the Issues & Assistance category. And if you want to introduce yourself, you can do so here: Garuda Community > Introduce yourself (without garuda-inxi
of course ).
Welcome to the community.
btw: the swoosh means that a reboot is pending after a system update:
3 Likes
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.