KDE 6 only works on X11

[DirtyOldMan]

So today the update to KDE 6 was pushed. After successful update I rebooted and logged into wayland session. Extremely slow with a lot of errors. For example:
krunner failed to start error, ‘/’ file system not responding, mouse pointer does not move, it takes several minutes to launch anything, does not see my second monitor.

Works great on X11, which is the output from because I can’t get the output from wayland. Thank you in advance for the help.

System:
  Kernel: 6.7.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=976373b3-8462-4b31-807f-30616758a502 rw rootflags=subvol=@
    quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
    ibt=off
  Desktop: KDE Plasma v: 6.0.1 tk: Qt v: N/A info: frameworks v: 6.0.0
    wm: kwin_x11 with: krunner vt: 2 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: ROG Strix G713QE_G713QE v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: G713QE v: 1.0 serial: <superuser required>
    uuid: <superuser required> UEFI: American Megatrends LLC. v: G713QE.331
    date: 02/24/2023
Battery:
  ID-1: BAT0 charge: 48.9 Wh (100.0%) condition: 48.9/56.0 Wh (87.3%)
    volts: 16.9 min: 15.9 model: AS3GWZC3KC G513-36 type: Li-ion
    serial: <filter> status: full
CPU:
  Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 3 gen: 4 level: v3 note: check built: 2021-22
    process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
    microcode: 0xA50000C
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 684 high: 1676 min/max: 400/4463 scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 400 2: 400 3: 400
    4: 1443 5: 400 6: 400 7: 1618 8: 400 9: 1676 10: 400 11: 400 12: 400
    13: 1408 14: 400 15: 400 16: 400 bogomips: 102207
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GA107M [GeForce RTX 3050 Ti Mobile] vendor: ASUSTeK
    driver: nvidia v: 550.54.14 alternate: nouveau,nvidia_drm non-free: 545.xx+
    status: current (as of 2024-02; EOL~2026-12-xx) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-2023 pcie: gen: 2 speed: 5 GT/s
    lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16 ports: active: none
    off: DP-1 empty: none bus-ID: 01:00.0 chip-ID: 10de:25a0 class-ID: 0300
  Device-2: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1
    bus-ID: 05:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 44.0 C
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.4
    compositor: kwin_x11 driver: X: loaded: amdgpu,nvidia
    unloaded: modesetting,nouveau alternate: fbdev,nv,vesa dri: radeonsi
    gpu: amdgpu,nvidia,nvidia-nvswitch display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1013x285mm (39.88x11.22")
    s-diag: 1052mm (41.43")
  Monitor-1: DP-1 mapped: DP-1-0 note: disabled pos: right
    model: Acer XFA243Y S serial: <filter> built: 2023 res: 1920x1080 dpi: 92
    gamma: 1.2 size: 532x304mm (20.94x11.97") diag: 613mm (24.1") ratio: 16:9
    modes: max: 1920x1080 min: 640x480
  Monitor-2: eDP-1 mapped: eDP pos: primary,left model: AU Optronics 0x8294
    built: 2020 res: 1920x1080 hz: 144 dpi: 128 gamma: 1.2
    size: 382x215mm (15.04x8.46") diag: 438mm (17.3") ratio: 16:9 modes:
    max: 1920x1080 min: 640x480
  API: EGL v: 1.5 hw: drv: nvidia drv: amd radeonsi platforms: device: 0
    drv: nvidia device: 1 drv: radeonsi device: 3 drv: swrast surfaceless:
    drv: nvidia x11: drv: radeonsi inactive: gbm,wayland,device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: amd mesa v: 24.0.2-arch1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
    renoir LLVM 16.0.6 DRM 3.57 6.7.8-zen1-1-zen) device-ID: 1002:1638
    memory: 500 MiB unified: no
  API: Vulkan v: 1.3.279 layers: 4 device: 0 type: integrated-gpu name: AMD
    Radeon Graphics (RADV RENOIR) driver: mesa radv v: 24.0.2-arch1.1
    device-ID: 1002:1638 surfaces: xcb,xlib device: 1 type: discrete-gpu
    name: NVIDIA GeForce RTX 3050 Ti Laptop GPU driver: nvidia v: 550.54.14
    device-ID: 10de:25a0 surfaces: xcb,xlib device: 2 type: cpu name: llvmpipe
    (LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 24.0.2-arch1.1 (LLVM
    16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
  Device-1: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 01:00.1 chip-ID: 10de:2291 class-ID: 0403
  Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.1 chip-ID: 1002:1637
    class-ID: 0403
  Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: ASUSTeK
    driver: N/A alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x,
    snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
    snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
    snd_sof_amd_acp63 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
    speed: 16 GT/s bus-ID: 05:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-4: AMD Family 17h/19h HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3
    class-ID: 0403
  API: ALSA v: k6.7.8-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK RTL8111/8168/8411 driver: r8169 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp2s0 state: down mac: <filter>
  Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter
    vendor: AzureWave driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s
    lanes: 1 bus-ID: 03:00.0 chip-ID: 14c3:7961 class-ID: 0280
  IF: wlp3s0 state: up mac: <filter>
  Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB
    rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4:2 chip-ID: 13d3:3563
    class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
    lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
  Local Storage: total: 931.51 GiB used: 86.95 GiB (9.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P1SSD8
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: P3CR021 temp: 38.9 C
    scheme: GPT
Partition:
  ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 86.95 GiB (9.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 584 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 86.95 GiB (9.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 86.95 GiB (9.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 86.95 GiB (9.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.03 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 51.0 C mobo: 42.0 C gpu: amdgpu temp: 45.0 C
  Fan Speeds (rpm): cpu: 1800
Info:
  Memory: total: 16 GiB note: est. available: 15.03 GiB used: 4.78 GiB (31.8%)
  Processes: 381 Power: uptime: 28m states: freeze,mem,disk suspend: s2idle
    wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume
    image: 5.98 GiB services: org_kde_powerdevil, power-profiles-daemon,
    upowerd Init: systemd v: 255 default: graphical tool: systemctl
  Packages: 1718 pm: pacman pkgs: 1692 libs: 451 tools: octopi,paru
    pm: appimage pkgs: 0 pm: flatpak pkgs: 26 Compilers: gcc: 13.2.1
    Shell: garuda-inxi default: Bash v: 5.2.26 running-in: alacritty
    inxi: 3.3.33
Garuda (2.6.23-1):
  System install date:     2023-11-17
  Last full system update: 2024-03-06
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio nvidia-dkms
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:

[filo]

For Wayland try using the kernel boot parameter
nvidia-drm.modeset=1
e.g. with:

sudo cp /etc/default/grub /etc/default/grub.bak && sudo sed '/^GRUB_CMDLINE_LINUX_DEFAULT=/s/"$/ nvidia-drm.modeset=1 "/g' -i /etc/default/grub && sudo update-grub

[DirtyOldMan]

That didn’t do anything

[Locutus]

So we are getting the 6.0.0 and not waiting til 6.0.1. Sorry but leave it to the Arch devs to mess things up.

[zayan]

Waiting for stable release.

[filo]

@DirtyOldMan

KDE Plasma v: 6.0.1

This is the release, and stable.

@Locutus

leave it to the Arch devs to mess things up

But this is very true.
Arch or most likely KDE devs.
Not to mention Nvidia…

[Locutus]

For this we should have been given a warning that it was coming. Did Arch even announce that this was dropping? What is this bit about a migration tool?

[filo]

I see your point, but although highly relevant, this update has been very much under focus for months.
There was also “the big testing thread” in our forum.
I didn’t get a chance to participate, but in my opinion a look at how things were going had to be taken every now and then.
For example, there was some talk about it at the moment.

KDE 6 repository / testing

Also, FYI (also linked in GSM, but nice to have)

or here:

KDE 6 repository / testing

Hello everyone! We’re entering the final testing phase of plasma6 not just on arch, but Garuda’s end as well. Here is how you join the test: Install Garuda dr460nized (skip setup assistant, etc. if you want, it shouldn’t matter) Add extra-testing repo to /etc/pacman.conf above the extra repo. garuda-update Reboot! Everything else will be done automatically for you thanks to garuda-update and garuda-system-maintenance. You can of course also try this on your main system, but do make liberal…

Everything was done, very well in my opinion, and without being able to know when Arch would have released KDE6 from testing to extra, so in my opinion it would have been difficult to manage a precise communication in terms of timing and details (as things were fixed as testing progressed).

[SGS]

Boahhhhh. it works on the old Nvidia PC from 2012 .
Update today via garuda-update.

System:
Kernel: 6.7.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=cfe93033-525c-4209-bf64-584214ef666e rw rootflags=subvol=@
rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.0.1 tk: Qt v: N/A info: frameworks v: 6.0.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: P8Z77-V DELUXE v: Rev 1.xx
serial: <superuser required> part-nu: SKU uuid: <superuser required>
UEFI: American Megatrends v: 2104 date: 08/13/2013
CPU:
Info: model: Intel Core i7-3770K bits: 64 type: MT MCP arch: Ivy Bridge
gen: core 3 level: v2 built: 2012-15 process: Intel 22nm family: 6
model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1642 high: 1649 min/max: 1600/4100 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1649 2: 1600 3: 1649
4: 1649 5: 1648 6: 1648 7: 1648 8: 1648 bogomips: 57692
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GP106 [GeForce GTX 1060 6GB] vendor: ZOTAC driver: nvidia
v: 550.54.14 alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current
(as of 2024-02; EOL~2026-12-xx) arch: Pascal code: GP10x
process: TSMC 16nm built: 2016-2021 pcie: gen: 3 speed: 8 GT/s lanes: 16
ports: active: none off: HDMI-A-1 empty: DP-1, DP-2, DP-3, DVI-D-1
bus-ID: 01:00.0 chip-ID: 10de:1c03 class-ID: 0300
Display: wayland server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4
compositor: kwin_wayland driver: X: loaded: nvidia gpu: nvidia display-ID: 0
Monitor-1: HDMI-A-1 res: 1920x1200 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia wayland: drv: nvidia
x11: drv: zink inactive: device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.54.14
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce GTX 1060
6GB/PCIe/SSE2 memory: 5.86 GiB display-ID: :1.0
API: Vulkan v: 1.3.279 layers: 1 device: 0 type: discrete-gpu name: NVIDIA
GeForce GTX 1060 6GB driver: nvidia v: 550.54.14 device-ID: 10de:1c03
surfaces: xcb,xlib,wayland
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: ASUSTeK 7
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20
class-ID: 0403
Device-2: NVIDIA GP106 High Definition Audio vendor: ZOTAC
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:10f1 class-ID: 0403
API: ALSA v: k6.7.8-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82579V Gigabit Network vendor: ASUSTeK P8P67 Deluxe
driver: e1000e v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:1503
class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Broadcom BCM43228 802.11a/b/g/n vendor: ASUSTeK driver: wl
v: kernel modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1
bus-ID: 0c:00.0 chip-ID: 14e4:4359 class-ID: 0280
IF: wlp12s0 state: dormant mac: <filter>
Device-3: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK P8 series driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: b000 bus-ID: 0d:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp13s0 state: down mac: <filter>
IF-ID-1: br-0397c1a9e678 state: down mac: <filter>
IF-ID-2: br-11891cc194f4 state: down mac: <filter>
IF-ID-3: br-16768c1f2423 state: down mac: <filter>
IF-ID-4: br-2117dea2171c state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-5: br-2d17af7b321c state: down mac: <filter>
IF-ID-6: br-8f71adc2e4de state: down mac: <filter>
IF-ID-7: br-d25a6241494b state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-8: br-d713fa6e173f state: down mac: <filter>
IF-ID-9: br-df601f28a175 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-10: docker0 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-11: docker_gwbridge state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-12: veth000d76f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-13: veth0a7ecee state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-14: veth1f95238 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-15: veth3830b72 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-16: veth5701266 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-17: veth705318e state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-18: veth82b18e0 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-19: vetha2bfcaf state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-20: vetha8f303d state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-21: vethb9893c6 state: up speed: 10000 Mbps duplex: full
mac: <filter>
Info: services: apache2, NetworkManager, sshd, systemd-timesyncd,
wpa_supplicant
Bluetooth:
Device-1: ASUSTek BCM20702A0 driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.1:3 chip-ID: 0b05:17b5
class-ID: fe01 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
Local Storage: total: 3.41 TiB used: 2.71 TiB (79.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 1B6Q scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD10EACS-22D6B1 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s tech: N/A serial: <filter> fw-rev: 1A01
scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: SSK model: SSK Storage
size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter>
fw-rev: 0212 scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-4: /dev/sdd maj-min: 8:48 vendor: Toshiba model: MQ01ABB200
size: 1.82 TiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0
spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: HDD rpm: 5400
serial: <filter> fw-rev: 5438 scheme: GPT
Partition:
ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 82.17 GiB (35.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 584 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 82.17 GiB (35.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 82.17 GiB (35.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 82.17 GiB (35.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.56 GiB used: 19.8 MiB (0.1%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 31.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB available: 15.56 GiB used: 4.91 GiB (31.6%)
Processes: 365 Power: uptime: 1h 17m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.16 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 1409 libs: 379 tools: octopi,pacseek,paru
Compilers: gcc: 13.2.1 Shell: garuda-inxi default: fish v: 3.7.0
running-in: konsole inxi: 3.3.33
Garuda (2.6.23-1):
System install date:     2023-03-23
Last full system update: 2024-03-07 ↻
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       No/Undetected
Failed units:
Total system updates:    380
--> Updates per week:    7

[Locutus]

Like I said I blame Arch cause they could have pushed a message if they had wanted to. I got hot cause I did an update yesterday morning just before having a ton of things to do outside the apartment just to get home to Plasma 6 being pushed. I was expecting to come home, check email, eat and go to bed. But instead I ended up having to deal with fixing a dozen or so minor issues with 6. Like I said from what I’ve read so far I got off pretty easy.

[Bro]

@Locutus

…eat and go to bed. But instead I ended up having to deal with fixing a dozen or so minor issues with 6. Like I said from what I’ve read so far I got off pretty easy.

Wow! Plasma 6 got you so excited you missed your bedtime?

Did you at least eat?

[Locutus]

Do not reply to me. I’ve told you before. It is not a request.

[Bro]

I guess I’ll reply to whomever I wish. Certainly I don’t bomb your posts with emojis, do I?