Journal was floating with error?

My inxi

╭─gampel@garudacomp in ~
🕙 17:49:10
╰─λ garuda-inxi
System:
Kernel: 6.14.10-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: hpet,acpi_pm parameters: quiet
initcall_blacklist=simpledrm_platform_driver_init loglevel=3 ibt=off
root=UUID=fd644241-2723-4347-b0fc-747c588e12fa rw rootflags=subvol=@
initrd=@\boot\initramfs-linux-zen.img
Desktop: KDE Plasma v: 6.3.5 tk: Qt v: N/A info: frameworks v: 6.14.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: Micro-Star product: MS-7D54 v: 2.0
serial: <superuser required>
Mobo: Micro-Star model: MAG X570S TORPEDO MAX (MS-7D54) v: 2.0
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 04/08/2025
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Illuminated Keyboard K800
serial: <filter> charge: 55% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2 gen: 2
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701035
Topology: cpus: 1x dies: 1 clusters: 1 cores: 6 threads: 12 tpc: 2
smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB
desc: 6x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 3598 min/max: 550/4208 boost: enabled scaling:
driver: amd-pstate-epp governor: performance cores: 1: 3598 2: 3598 3: 3598
4: 3598 5: 3598 6: 3598 7: 3598 8: 3598 9: 3598 10: 3598 11: 3598 12: 3598
bogomips: 86390
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 23 [Radeon RX 6600/6600
XT/6600M] vendor: XFX driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, Writeback-1
bus-ID: 2f:00.0 chip-ID: 1002:73ff class-ID: 0300
Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: HDMI-A-1 model: Samsung C32F39M serial: <filter> built: 2019
res: mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 70 gamma: 1.2
size: 698x393mm (27.48x15.47") diag: 801mm (31.5") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.2-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 6600 (radeonsi navi23
LLVM 19.1.7 DRM 3.61 6.14.10-zen1-1-zen) device-ID: 1002:73ff
memory: 7.81 GiB unified: no display-ID: :1.0
API: Vulkan v: 1.4.313 layers: 13 device: 0 type: discrete-gpu name: AMD
Radeon RX 6600 (RADV NAVI23) driver: mesa radv v: 25.1.2-arch1.1
device-ID: 1002:73ff surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 19.1.7 256 bits) driver: mesa llvmpipe v: 25.1.2-arch1.1 (LLVM
19.1.7) device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: amd-smi, amdgpu_top, corectrl, lact
wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 21/23 HDMI/DP Audio
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 2f:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 31:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Micro Star USB Audio driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-5:2
chip-ID: 0db0:a073 class-ID: 0300
Device-4: Razer USA Kraken Tournament Edition
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 3-6.1:4 chip-ID: 1532:0520 class-ID: 0300
serial: <filter>
API: ALSA v: k6.14.10-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 26:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp38s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: d000 bus-ID: 28:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Info: services: NetworkManager,systemd-timesyncd
Drives:
Local Storage: total: 4.66 TiB used: 1.92 TiB (41.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WD BLACK SN850X 1000GB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 620361WD temp: 39.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Western Digital
model: WDS500G1XHE-00AFY0 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 615400WD temp: 39.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: A-Data model: SP900 size: 119.24 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s tech: SSD
serial: <filter> fw-rev: 2a scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 870 EVO 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD30EZAX-00C8UB0 size: 2.73 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 1A01 scheme: GPT
Partition:
ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 186.9 GiB (40.2%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 628 KiB (0.2%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 186.9 GiB (40.2%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-4: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 186.9 GiB (40.2%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-5: /var/tmp raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 186.9 GiB (40.2%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.26 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 12
dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme1n1p3 maj-min: 259:8
Sensors:
System Temperatures: cpu: 46.8 C mobo: 32.5 C gpu: amdgpu temp: 31.0 C
mem: 32.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 889
Info:
Memory: total: 32 GiB available: 31.26 GiB used: 4.68 GiB (15.0%)
Processes: 437 Power: uptime: 24m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.48 GiB services: org_kde_powerdevil,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 2091 libs: 574 tools: octopi,pacseek,paru,yay
Compilers: clang: 19.1.7 gcc: 15.1.1 Shell: garuda-inxi default: fish
v: 4.0.2 running-in: konsole inxi: 3.3.38
Garuda (2.7.2-1):
System install date:     2025-03-25
Last full system update: 2025-06-06
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       Probably (Run as root to verify)
Failed units:

Yesterday, i make my daily update and after reboot i take a look inside the journal and was surprised about some messages about qml: 4.3.0 4.3.0 true. Now, today, also after update i have more qml errors.
And why garuda-inxi tells me this system is stalled this year, is also wrong, but that’s perhaps in another topic.

├󰅐 OS Age 303 days

Logfile from today

The journal spam about qml might be due to some kind of KDE customization or widget. You could try a different fresh user account with no customization (like a plain default panel and such) and see if there is anything wrong with the updates themselves. If that doesn’t have those things in the journal doing that, you can try to see what is causing them by adding customization you have in your primary user account to the fresh one. (Edit: be sure to slowly add customization to that fresh account to troubleshoot it)

Apart from that, have you tried a older snapshot to confirm it is an issue that surfaces after a recent update? If so, could you share some update logs to see what has been updated recently?

4 Likes

It’s on my metal mokka + metal dragon + and both vm.
Second user or create new user make no difference.
Every time after starting a app (firefox or systemsettings, garuda stuff) i have more messages like this. We had 2 days ago a lot of qt updates. For me, that’s the prob.
If i use a older snapshot (without these updates) no error messages in the journal.

I found the “problem”.. this horrible plasma6-applets-panel-colorizer.
Useless, if it generate this kind of messages. Deinstalled. Done.
Thx @Kayo

3 Likes

Ah, there’s been quite a few issues with that in the past, and I don’t use it personally with my Plasma configurations.
(explains why I didn’t notice those qml lines in my logs when I checked)

1 Like

Not only in the past :upside_down_face:

3 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.