Je n'arrive pas à démarer

je n’arrive pas à démarrer sur là dernier iso. ça fonctionne sur celle de janvier

 garuda-inxi 
System:
  Kernel: 6.15.2-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=1deaef80-bcee-4256-8001-61ef84255a0e rw rootflags=subvol=@
    loglevel=3 nvidia-drm.modeset=1 ibt=off
  Desktop: Sway v: 0.5.1 with: waybar tools: swayidle avail: gtklock vt: 1
    lm: greetd Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: Razer product: Blade 18 - RZ09-0509 v: 10.04
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Razer model: KI8100 v: 4 serial: <superuser required>
    part-nu: RZ09-0509TFK3 uuid: <superuser required> UEFI: Razer v: 1.04
    date: 05/06/2024
Battery:
  ID-1: BAT0 charge: 47.6 Wh (49.5%) condition: 96.1/91.7 Wh (104.8%)
    volts: 15.3 min: 15.4 model: Razer Blade type: Unknown serial: <filter>
    status: not charging cycles: 22
CPU:
  Info: model: Intel Core i9-14900HX bits: 64 type: MST AMCP arch: Raptor Lake
    gen: core 14 level: v3 note: check built: 2022+ process: Intel 7 (10nm)
    family: 6 model-id: 0xB7 (183) stepping: 1 microcode: 0x12F
  Topology: cpus: 1x dies: 1 clusters: 12 cores: 24 threads: 32 mt: 8 tpc: 2
    st: 16 smt: enabled cache: L1: 2.1 MiB desc: d-16x32 KiB, 8x48 KiB; i-8x32
    KiB, 16x64 KiB L2: 32 MiB desc: 8x2 MiB, 4x4 MiB L3: 36 MiB desc: 1x36 MiB
  Speed (MHz): avg: 800 min/max: 800/5600:5800:4100 scaling:
    driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800
    5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800 14: 800
    15: 800 16: 800 17: 800 18: 800 19: 800 20: 800 21: 800 22: 800 23: 800
    24: 800 25: 800 26: 800 27: 800 28: 800 29: 800 30: 800 31: 800 32: 800
    bogomips: 154828
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel Raptor Lake-S UHD Graphics vendor: Razer USA driver: i915
    v: kernel alternate: xe arch: Xe process: Intel 10nm built: 2020-21 ports:
    active: eDP-2 empty: DP-4,HDMI-A-2 bus-ID: 0000:00:02.0 chip-ID: 8086:a788
    class-ID: 0300
  Device-2: NVIDIA AD104M [GeForce RTX 4080 Max-Q / Mobile]
    vendor: Razer USA driver: nvidia v: 575.64 alternate: nouveau,nvidia_drm
    non-free: 550-570.xx+ status: current (as of 2025-04) arch: Lovelace
    code: AD1xx process: TSMC n4 (5nm) built: 2022+ ports: active: none
    empty: DP-1, DP-2, DP-3, HDMI-A-1, eDP-1 bus-ID: 0000:01:00.0
    chip-ID: 10de:27e0 class-ID: 0300
  Device-3: Luxvisions Innotech Integrated Camera driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:5 chip-ID: 30c9:009e
    class-ID: fe01 serial: <filter>
  Display: wayland server: Xwayland v: 24.1.8 compositor: Sway v: 0.5.1
    driver: gpu: i915 display-ID: 1
  Monitor-1: eDP-2 model: BOE Display 0x0c87 built: 2023 res:
    mode: 2560x1600 hz: 300 scale: 100% (1) dpi: 168 gamma: 1.2
    size: 388x242mm (15.28x9.53") diag: 457mm (18") ratio: 16:10
    modes: 2560x1600
  API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
    drv: nvidia device: 1 drv: iris device: 3 drv: swrast gbm: drv: iris
    surfaceless: drv: nvidia wayland: drv: iris x11: drv: iris
    inactive: device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 575.64
    glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4080 Laptop
    GPU/PCIe/SSE2 memory: 11.71 GiB
  API: Vulkan v: 1.4.313 layers: 11 device: 0 type: integrated-gpu
    name: Intel Graphics (RPL-S) driver: mesa intel v: 25.1.4-arch1.1
    device-ID: 8086:a788 surfaces: N/A device: 1 type: discrete-gpu
    name: NVIDIA GeForce RTX 4080 Laptop GPU driver: nvidia v: 575.64
    device-ID: 10de:27e0 surfaces: N/A device: 2 type: cpu name: llvmpipe
    (LLVM 20.1.6 256 bits) driver: mesa llvmpipe v: 25.1.4-arch1.1 (LLVM
    20.1.6) device-ID: 10005:0000 surfaces: N/A
  Info: Tools: api: eglinfo, glxinfo, vulkaninfo
    gpu: nvidia-settings,nvidia-smi wl: kanshi, swaymsg, wdisplays
    x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel Raptor Lake High Definition Audio vendor: Razer USA
    driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel, snd_soc_avs,
    snd_sof_pci_intel_tgl bus-ID: 0000:00:1f.3 chip-ID: 8086:7a50
    class-ID: 0401
  Device-2: NVIDIA AD104 High Definition Audio vendor: Razer USA
    driver: snd_hda_intel v: kernel bus-ID: 0000:01:00.1 chip-ID: 10de:22bc
    class-ID: 0403
  Device-3: Razer USA BlackShark V2 HS USB
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-2.3:6 chip-ID: 1532:056e class-ID: 0300
    serial: <filter>
  API: ALSA v: k6.15.2-zen1-1-zen status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.4.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: Razer USA driver: r8169 v: kernel
    port: 3000 bus-ID: 0000:54:00.0 chip-ID: 10ec:8125 class-ID: 0200
  IF: enp84s0 state: down mac: <filter>
  Device-2: Intel Wi-Fi 7 AX1775 /AX1790 /BE20 /BE401/BE1750 2x2
    driver: iwlwifi v: kernel bus-ID: 0000:55:00.0 chip-ID: 8086:272b
    class-ID: 0280
  IF: wlp85s0f0 state: up mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: Intel BE200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:9 chip-ID: 8087:0036
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: N/A
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller Intel
    driver: vmd v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:a77f rev:
    class-ID: 0104
  Supported mdraid levels: raid0
  Device-1: md126 maj-min: 9:126 type: mdraid level: raid-0 status: active
    size: 7.28 TiB
  Info: report: N/A blocks: 7814032384 chunk-size: 64k
  Components: Online:
  0: nvme1n1 maj-min: 259:1 size: 3.64 TiB
  1: nvme0n1 maj-min: 259:0 size: 3.64 TiB
  Device-2: md127 maj-min: 9:127 type: mdraid level: N/A status: inactive
    size: N/A
  Info: report: N/A blocks: 4784 chunk-size: N/A
  Components: Online: N/A Spare:
  0: nvme0n1 maj-min: 259:0 size: 3.64 TiB state: S
  1: nvme1n1 maj-min: 259:1 size: 3.64 TiB state: S
Drives:
  Local Storage: total: raw: 7.51 TiB usable: 238.47 GiB
    used: 118.03 GiB (49.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 990 PRO 4TB
    size: 3.64 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7 temp: 38.9 C
  ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung model: SSD 990 PRO 4TB
    size: 3.64 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7 temp: 39.9 C
  ID-3: /dev/sda maj-min: 8:0 vendor: JMicron Tech model: Generic
    size: 238.47 GiB block-size: physical: 4096 B logical: 512 B type: USB
    rev: 3.2 spd: 10 Gb/s lanes: 1 mode: 3.2 gen-2x1 tech: N/A
    serial: <filter> fw-rev: 0209 scheme: GPT
Partition:
  ID-1: / raw-size: 237.42 GiB size: 237.42 GiB (100.00%)
    used: 118.03 GiB (49.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-2: /boot/efi raw-size: 1.05 GiB size: 1.05 GiB (99.80%)
    used: 616 KiB (0.1%) fs: vfat dev: /dev/sda2 maj-min: 8:2
  ID-3: /home raw-size: 237.42 GiB size: 237.42 GiB (100.00%)
    used: 118.03 GiB (49.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-4: /var/log raw-size: 237.42 GiB size: 237.42 GiB (100.00%)
    used: 118.03 GiB (49.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-5: /var/tmp raw-size: 237.42 GiB size: 237.42 GiB (100.00%)
    used: 118.03 GiB (49.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 30.97 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 49.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 32 GiB note: est. available: 30.97 GiB used: 7.14 GiB (23.1%)
  Processes: 529 Power: uptime: 20h 24m states: freeze,mem,disk
    suspend: s2idle avail: deep wakeups: 3 hibernate: platform avail: shutdown,
    reboot, suspend, test_resume image: 12.31 GiB services: upowerd
    Init: systemd v: 257 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1387 libs: 427 tools: pacseek,paru,yay
    Compilers: gcc: 15.1.1 Shell: garuda-inxi default: fish v: 4.0.2
    running-in: kitty inxi: 3.3.38
Garuda (2.7.2-1):
  System install date:     2025-05-10
  Last full system update: 2025-06-21 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut nvidia-dkms
  Windows dual bo

https://forum.garudalinux.org/search?context=topic&context_id=1274&q=Grub2%20%20status%3Asolved%20order%3Alatest&skip_context=true

3 Likes

la seule réponse c’est ventoy ?

No, and the grub2 boot option when prompted

3 Likes

I do not use Ventoy and it works for me. I use cat or dd.


Je n’utilise pas Ventoy et cela fonctionne pour moi. J’utilise cat ou dd.

4 Likes

merci, je ne demandais comment faire une clé, juste sur la dernière ça ne fonctionne plus sur ce pc

What is the complete filename of the ISO which is not working for you?


Quel est le nom de fichier complet de l’ISO qui ne fonctionne pas pour vous ?

1 Like

garuda-sway-linux-zen-250131.iso fonctionne

My translation is maybe not good. I am trying to ask for the filename of the ISO which has the problem.


Ma traduction n’est peut-être pas bonne. J’essaie de demander le nom de fichier de l’ISO qui a le problème.

garuda-sway-linux-zen-250308.iso

Pour la dernière ISO, Ventoy avec l’option grub2 devrait fonctionner. Avez-vous essayé ?
Après avoir installé Ventoy et préparé la clé USB (il suffit de suivre les instructions), tout ce que vous avez à faire est de copier le fichier .iso sur celle-ci.
Et éventuellement vérifier la somme de contrôle après la copie sur l’USB.

2 Likes

I’m on vacation for a week and my ventoy drive is at work, but I’ll try it this week. I usually just put the Garuda ISO on a key.

If you have a USB key available, and you can delete the date inside, you can put Ventoy also there, or in any case use cat or dd without Ventoy. E.g. from the directory with the.iso file:

cat garuda-sway-linux-zen-250308.iso > /dev/disk/by-id/usb[Press Tab Here to auto complete]
2 Likes

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.