Issues with my Second Screen

Issues & Assistance Newbies
1

Hi Guys, good afternoon from Chile.
I have an issue, and I’m searching and searching, but the solutions are too old for my issue, and there are no longer available ion 2023, thbis, because all the answers are related with Latte Dock pannel, but now, this isn’t in use.

I have two monitors, in the primary one, is all normal, i can close the windows, drag trhem, everything normal. But, in myu second screen, i can’t close, or minimize the windows.

Do you know some answer for this problem? i’m going crazy with this.

Thanks!

2

Hello, please post your garua-inxi as stated in the new thread template.

3 Likes
3

Remainder

Template

Hello Garuda users.

Please read the following template before requesting assistance:

Please post the terminal/konsole input and output as text (no pictures) from the following command:

garuda-inxi

Refusing to post the output of the required “garuda-inxi” on a help request will likely result in you not receiving any help from the Garuda team. A failure to provide your system specs may also result in your thread being closed without notice, (as without this information providing assistance is often next to impossible).

Before opening a new help request, please search the Arch and Garuda Wiki’s, and read any relevant sections related to your issue. Also, thoroughly search any error messages in the forum’s search engine and on the web. For in depth information on how to search for answers to Linux issues effectively read the tips on the Garuda Wiki:

How to search for solutions the right way | Garuda Linux wiki

4 Likes
4

Sounds like your monitors are overlapping. Check your display config (right click on the desktop). You should see your screens in an overlay at the top. Make sure they aren’t overlapping.

5

Sorry, i didn’t read that part: here is the ionfo that all of you asked.

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_US",
LC_ALL = (unset),
LC_ADDRESS = "es_CL.UTF-8",
LC_NAME = "es_CL.UTF-8",
LC_MONETARY = "es_CL.UTF-8",
LC_PAPER = "es_CL.UTF-8",
LC_IDENTIFICATION = "es_CL.UTF-8",
LC_TELEPHONE = "es_CL.UTF-8",
LC_MEASUREMENT = "es_CL.UTF-8",
LC_TIME = "es_CL.UTF-8",
LC_NUMERIC = "es_CL.UTF-8",
LANG = "en_US"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:
Kernel: 6.6.6-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=60798c1b-f44d-49e6-8329-02238293d0b1 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME B560M-A v: Rev 1.xx
serial: <superuser required> BIOS: American Megatrends v: 0403
date: 01/26/2021
CPU:
Info: model: Intel Core i5-10400F bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA5 (165) stepping: 3 microcode: 0xF8
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 1654 high: 4303 min/max: 800/4300 scaling:
driver: intel_pstate governor: performance cores: 1: 800 2: 4303 3: 800
4: 800 5: 800 6: 800 7: 4128 8: 800 9: 4220 10: 800 11: 800 12: 800
bogomips: 69597
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate]
vendor: Micro-Star MSI driver: nvidia v: 545.29.06
alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current (as of
2023-10; EOL~2026-12-xx) arch: Ampere code: GAxxx process: TSMC n7 (7nm)
built: 2020-2023 pcie: gen: 2 speed: 5 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s ports: active: none off: DP-2,HDMI-A-1 empty: DP-1,DP-3
bus-ID: 01:00.0 chip-ID: 10de:2504 class-ID: 0300
Device-2: Sunplus Innovation HD 720P webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-10.3:6
chip-ID: 1bcf:2701 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.10 with: Xwayland v: 23.2.3
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia,nvidia-nvswitch
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.40x13.50")
s-diag: 1252mm (49.29")
Monitor-1: DP-2 note: disabled pos: primary,right
model: ViewSonic VX2718 series serial: <filter> built: 2021 res: 1920x1080
dpi: 80 gamma: 1.2 size: 609x348mm (23.98x13.7") diag: 690mm (27.2")
ratio: 16:9 modes: max: 1920x1080 min: 640x480
Monitor-2: HDMI-A-1 mapped: HDMI-0 note: disabled pos: left
model: Asus VP247 serial: <filter> built: 2017 res: 1920x1080 hz: 60 dpi: 94
gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9
modes: max: 1920x1080 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia
inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia v: 545.29.06 glx-v: 1.4
direct-render: yes renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2
memory: 11.72 GiB
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: Intel vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3 chip-ID: 8086:f0c8 class-ID: 0403
Device-2: NVIDIA GA106 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.1 chip-ID: 10de:228e
class-ID: 0403
Device-3: Sunplus Innovation HD 720P webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-10.3:6
chip-ID: 1bcf:2701 class-ID: 0102 serial: <filter>
API: ALSA v: k6.6.6-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel
port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15fa class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:2
chip-ID: 0a12:0001 class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: no class-ID: 7c0104
Drives:
Local Storage: total: 3.86 TiB used: 115.42 GiB (2.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Gigabyte model: G325E1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: EDFMC0.0 temp: 40.9 C
scheme: MBR
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: WDC WDS240G2G0A-00JH30
size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 0400 scheme: MBR
ID-3: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD20EZAZ-00L9GB0 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 0A80 scheme: MBR
ID-4: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD10EZEX-00BBHA0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 7200 serial: <filter>
fw-rev: 1A01 scheme: MBR
Partition:
ID-1: / raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 115.42 GiB (23.6%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-2: /home raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 115.42 GiB (23.6%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-3: /var/log raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 115.42 GiB (23.6%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-4: /var/tmp raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 115.42 GiB (23.6%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.48 GiB used: 351.8 MiB (2.2%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 34.0 C mobo: N/A gpu: nvidia temp: 47 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Info:
Processes: 335 Uptime: 1h 18m wakeups: 0 Memory: total: 16 GiB
available: 15.48 GiB used: 6.04 GiB (39.0%) Init: systemd v: 255
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
pm: pacman pkgs: 1515 libs: 479 tools: octopi,pamac,paru Shell: fish
v: 3.6.4 default: Bash v: 5.2.21 running-in: konsole inxi: 3.3.31
Garuda (2.6.21-1):
System install date:     2023-10-24
Last full system update: 2023-12-18 ↻
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       <superuser required>
6

Sorry, i put it alerady

7

Firstly, you need to reboot after your update so you can use the most latest kernel. After that, see if your issue persists.

Also, you are running an outdated version of your BIOS (looks to be the oldest listed on the site for that board). I would highly suggest updating this as this can cause numerous problems if left outdated.

1 Like
8

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.